This interface represents an input source for data.
This interface allows an application to encapsulate information about an input source in a single object, which may include a public identifier, a system identifier, a byte stream (possibly with a specified encoding), a base URI, and/or a character stream.
The exact definitions of a byte stream and a character stream are binding dependent.
The application is expected to provide objects that implement this
interface whenever such objects are needed. The application can either
provide its own objects that implement this interface, or it can use the
generic factory method DOMImplementationLS.createLSInput()
to create objects that implement this interface.
The LSParser
will use the LSInput
object to
determine how to read data. The LSParser
will look at the
different inputs specified in the LSInput
in the following
order to know which one to read from, the first one that is not null and
not an empty string will be used:
-
LSInput.characterStream
-
LSInput.byteStream
-
LSInput.stringData
-
LSInput.systemId
-
LSInput.publicId
If all inputs are null, the LSParser
will report a
DOMError
with its DOMError.type
set to
"no-input-specified"
and its DOMError.severity
set to DOMError.SEVERITY_FATAL_ERROR
.
LSInput
objects belong to the application. The DOM
implementation will never modify them (though it may make copies and
modify the copies, if necessary).
See also the Document Object Model (DOM) Level 3 Load and Save Specification.
Public Method Summary
abstract String |
getBaseURI()
The base URI to be used (see section 5.1.4 in [IETF RFC 2396]) for
resolving a relative
systemId to an absolute URI. |
abstract InputStream |
getByteStream()
An attribute of a language and binding dependent type that represents
a stream of bytes.
|
abstract boolean | |
abstract Reader |
getCharacterStream()
An attribute of a language and binding dependent type that represents
a stream of 16-bit units.
|
abstract String |
getEncoding()
The character encoding, if known.
|
abstract String |
getPublicId()
The public identifier for this input source.
|
abstract String |
getStringData()
String data to parse.
|
abstract String |
getSystemId()
The system identifier, a URI reference [IETF RFC 2396], for this
input source.
|
abstract void |
setBaseURI(String baseURI)
The base URI to be used (see section 5.1.4 in [IETF RFC 2396]) for
resolving a relative
systemId to an absolute URI. |
abstract void |
setByteStream(InputStream byteStream)
An attribute of a language and binding dependent type that represents
a stream of bytes.
|
abstract void |
setCertifiedText(boolean certifiedText)
|
abstract void |
setCharacterStream(Reader characterStream)
An attribute of a language and binding dependent type that represents
a stream of 16-bit units.
|
abstract void | |
abstract void | |
abstract void | |
abstract void |
setSystemId(String systemId)
The system identifier, a URI reference [IETF RFC 2396], for this
input source.
|
Public Methods
public abstract String getBaseURI ()
The base URI to be used (see section 5.1.4 in [IETF RFC 2396]) for
resolving a relative systemId
to an absolute URI.
If, when used, the base URI is itself a relative URI, an empty
string, or null, the behavior is implementation dependent.
public abstract InputStream getByteStream ()
An attribute of a language and binding dependent type that represents
a stream of bytes.
If the application knows the character encoding of the byte
stream, it should set the encoding attribute. Setting the encoding in
this way will override any encoding specified in an XML declaration
in the data.
public abstract boolean getCertifiedText ()
public abstract Reader getCharacterStream ()
An attribute of a language and binding dependent type that represents a stream of 16-bit units. The application must encode the stream using UTF-16 (defined in [Unicode] and in [ISO/IEC 10646]). It is not a requirement to have an XML declaration when using character streams. If an XML declaration is present, the value of the encoding attribute will be ignored.
public abstract String getEncoding ()
The character encoding, if known. The encoding must be a string
acceptable for an XML encoding declaration ([XML 1.0] section
4.3.3 "Character Encoding in Entities").
This attribute has no effect when the application provides a
character stream or string data. For other sources of input, an
encoding specified by means of this attribute will override any
encoding specified in the XML declaration or the Text declaration, or
an encoding obtained from a higher level protocol, such as HTTP [IETF RFC 2616].
public abstract String getPublicId ()
The public identifier for this input source. This may be mapped to an input source using an implementation dependent mechanism (such as catalogues or other mappings). The public identifier, if specified, may also be reported as part of the location information when errors are reported.
public abstract String getStringData ()
String data to parse. If provided, this will always be treated as a
sequence of 16-bit units (UTF-16 encoded characters). It is not a
requirement to have an XML declaration when using
stringData
. If an XML declaration is present, the value
of the encoding attribute will be ignored.
public abstract String getSystemId ()
The system identifier, a URI reference [IETF RFC 2396], for this
input source. The system identifier is optional if there is a byte
stream, a character stream, or string data. It is still useful to
provide one, since the application will use it to resolve any
relative URIs and can include it in error messages and warnings. (The
LSParser will only attempt to fetch the resource identified by the
URI reference if there is no other input available in the input
source.)
If the application knows the character encoding of the object
pointed to by the system identifier, it can set the encoding using
the encoding
attribute.
If the specified system ID is a relative URI reference (see
section 5 in [IETF RFC 2396]), the DOM
implementation will attempt to resolve the relative URI with the
baseURI
as the base, if that fails, the behavior is
implementation dependent.
public abstract void setBaseURI (String baseURI)
The base URI to be used (see section 5.1.4 in [IETF RFC 2396]) for
resolving a relative systemId
to an absolute URI.
If, when used, the base URI is itself a relative URI, an empty
string, or null, the behavior is implementation dependent.
Parameters
baseURI |
---|
public abstract void setByteStream (InputStream byteStream)
An attribute of a language and binding dependent type that represents
a stream of bytes.
If the application knows the character encoding of the byte
stream, it should set the encoding attribute. Setting the encoding in
this way will override any encoding specified in an XML declaration
in the data.
Parameters
byteStream |
---|
public abstract void setCertifiedText (boolean certifiedText)
public abstract void setCharacterStream (Reader characterStream)
An attribute of a language and binding dependent type that represents a stream of 16-bit units. The application must encode the stream using UTF-16 (defined in [Unicode] and in [ISO/IEC 10646]). It is not a requirement to have an XML declaration when using character streams. If an XML declaration is present, the value of the encoding attribute will be ignored.
Parameters
characterStream |
---|
public abstract void setEncoding (String encoding)
The character encoding, if known. The encoding must be a string
acceptable for an XML encoding declaration ([XML 1.0] section
4.3.3 "Character Encoding in Entities").
This attribute has no effect when the application provides a
character stream or string data. For other sources of input, an
encoding specified by means of this attribute will override any
encoding specified in the XML declaration or the Text declaration, or
an encoding obtained from a higher level protocol, such as HTTP [IETF RFC 2616].
Parameters
encoding |
---|
public abstract void setPublicId (String publicId)
The public identifier for this input source. This may be mapped to an input source using an implementation dependent mechanism (such as catalogues or other mappings). The public identifier, if specified, may also be reported as part of the location information when errors are reported.
Parameters
publicId |
---|
public abstract void setStringData (String stringData)
String data to parse. If provided, this will always be treated as a
sequence of 16-bit units (UTF-16 encoded characters). It is not a
requirement to have an XML declaration when using
stringData
. If an XML declaration is present, the value
of the encoding attribute will be ignored.
Parameters
stringData |
---|
public abstract void setSystemId (String systemId)
The system identifier, a URI reference [IETF RFC 2396], for this
input source. The system identifier is optional if there is a byte
stream, a character stream, or string data. It is still useful to
provide one, since the application will use it to resolve any
relative URIs and can include it in error messages and warnings. (The
LSParser will only attempt to fetch the resource identified by the
URI reference if there is no other input available in the input
source.)
If the application knows the character encoding of the object
pointed to by the system identifier, it can set the encoding using
the encoding
attribute.
If the specified system ID is a relative URI reference (see
section 5 in [IETF RFC 2396]), the DOM
implementation will attempt to resolve the relative URI with the
baseURI
as the base, if that fails, the behavior is
implementation dependent.
Parameters
systemId |
---|