Zarządzanie konwersjami po kliknięciu w internecie

Za pomocą interfejsu Google Ads API możesz zarządzać w Google Ads konwersjami z kliknięć online. Konwersje po kliknięciu online pomagają śledzić reklamy, które doprowadziły do sprzedaży w internecie, np. w witrynie.

Konwersje online są śledzone za pomocą tagu Google, ale możesz je dostosowywać lub ulepszać za pomocą interfejsu Google Ads API.

Jeśli masz już skonfigurowany tag Google i chcesz dostosować konwersje online, zapoznaj się ze stroną Dostosowywanie konwersji. Jeśli masz skonfigurowany tag Google i chcesz ulepszyć konwersje online za pomocą danych przekazywanych przez użytkowników, czyli konwersji rozszerzonych w kampaniach internetowych, czytaj dalej.

Konwersje rozszerzone w kampaniach internetowych

W sekcji poniżej znajdziesz informacje o tym, jak ulepszyć konwersje po kliknięciu online, czyli konwersje rozszerzone w kampaniach internetowych.

Konwersje rozszerzone w kampaniach internetowych wymagają skonfigurowania tagu, który automatycznie wysyła do Google Ads identyfikator kliknięcia, np. identyfikator kliknięcia Google, oraz identyfikator zamówienia, gdy użytkownik dokona konwersji. Konwersje rozszerzone możesz skonfigurować za pomocą Menedżera tagów Google, tagu Google lub interfejsu Google Ads API. Korzystanie z interfejsu Google Ads API daje Ci możliwość wysyłania danych własnych o konwersjach w ciągu 24 godzin od zdarzenia konwersji, a nie w tym samym czasie. Umożliwia to znajdowanie danych własnych z różnych źródeł, takich jak baza danych klientów lub system CRM.

Jak działają konwersje rozszerzone w kampaniach internetowych

Konwersje rozszerzone w kampaniach internetowych w interfejsie Google Ads API uzupełniają krok 3 w tym procesie.

Zamiast wysyłać zaszyfrowane informacje o użytkowniku, gdy wykona on konwersję, tag wysyła tylko identyfikator kliknięcia Google i identyfikator zamówienia, a zaszyfrowane informacje o użytkowniku wysyłasz później, importując identyfikator zamówienia wraz z zaszyfrowanymi danymi. Więcej informacji o konwersjach rozszerzonych w przypadku witryn znajdziesz w naszym Centrum pomocy.

Konwersje rozszerzone w kampaniach internetowych

Wymagania wstępne

Aby korzystać z konwersji rozszerzonych w kampaniach internetowych, musisz zaakceptować warunki dotyczące danych klienta. Możesz sprawdzić, czy warunki dotyczące danych klienta zostały zaakceptowane, wysyłając do klienta konwersji Google Ads to zapytanie:

SELECT
  customer.id,
  customer.conversion_tracking_setting.accepted_customer_data_terms
FROM customer

Jeśli accepted_customer_data_terms ma wartość false, postępuj zgodnie z instrukcjami podanymi w Centrum pomocy, aby spełnić ten warunek wstępny.

Konfigurowanie tagowania

Tagowanie witryny możesz skonfigurować, postępując zgodnie z instrukcjami w Centrum pomocy. Zalecamy też dodanie identyfikatorów transakcji (identyfikatorów zamówień) do tagu śledzenia konwersji, aby ułatwić dopasowywanie konwersji.

Wdrażanie interfejsu API

Oto ogólny proces importowania konwersji rozszerzonych w kampaniach internetowych w interfejsie Google Ads API.

  1. Normalizuj i szyfruj dane przekazywane przez użytkowników, takie jak adres e-mail, numer telefonu i adres pocztowy.

  2. Wypełnij ConversionAdjustmentobiekty znormalizowanymi i zaszyfrowanymi danymi przekazywanymi przez użytkowników.

  3. Zaimportuj obiekty ConversionAdjustment do ConversionAdjustmentUploadService.

  4. Sprawdź importy.

Normalizowanie i szyfrowanie danych przekazywanych przez użytkowników

Ze względu na kwestie związane z ochroną prywatności przed zaimportowaniem należy zaszyfrować te dane za pomocą algorytmu SHA-256:

  • Adres e-mail
  • Numer telefonu
  • Imię
  • Nazwisko
  • Adres pocztowy

Nie szyfruj tych danych:

  • Kraj
  • Region
  • Miasto
  • Kod pocztowy

Aby ustandaryzować wyniki szyfrowania, przed zaszyfrowaniem tych wartości wykonaj te czynności:

  • usuń spacje na początku i na końcu ciągu,
  • zmień pisownię tekstu na małe litery,
  • Sformatuj numery telefonów zgodnie ze standardem E.164.
  • usunąć wszystkie kropki (.) poprzedzające nazwę domeny w adresach e-mail gmail.com i googlemail.com.

Java

private String normalizeAndHash(MessageDigest digest, String s, boolean trimIntermediateSpaces)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  if (trimIntermediateSpaces) {
    // Removes leading, trailing, and intermediate spaces.
    normalized = normalized.replaceAll("\\s+", "");
  } else {
    // Removes only leading and trailing spaces.
    normalized = normalized.trim();
  }
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail, true);
}
UploadEnhancedConversionsForWeb.java

C#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
UploadEnhancedConversionsForWeb.cs

PHP

private static function normalizeAndHash(
    string $hashAlgorithm,
    string $value,
    bool $trimIntermediateSpaces
): string {
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    if ($trimIntermediateSpaces === true) {
        // Removes leading, trailing, and intermediate spaces.
        $normalized = str_replace(' ', '', $normalized);
    } else {
        // Removes only leading and trailing spaces.
        $normalized = trim($normalized);
    }
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail, true);
}
UploadEnhancedConversionsForWeb.php

Python

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.strip().lower()
    email_parts = normalized_email.split("@")

    # Check that there are at least two segments
    if len(email_parts) > 1:
        # Checks whether the domain of the email address is either "gmail.com"
        # or "googlemail.com". If this regex does not match then this statement
        # will evaluate to None.
        if re.match(r"^(gmail|googlemail)\.com$", email_parts[1]):
            # Removes any '.' characters from the portion of the email address
            # before the domain if the domain is gmail.com or googlemail.com.
            email_parts[0] = email_parts[0].replace(".", "")
            normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/9888656

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
upload_enhanced_conversions_for_web.py

Ruby

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/9888656.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
upload_enhanced_conversions_for_web.rb

Perl

sub normalize_and_hash {
  my $value                    = shift;
  my $trim_intermediate_spaces = shift;

  if ($trim_intermediate_spaces) {
    $value =~ s/\s+//g;
  } else {
    $value =~ s/^\s+|\s+$//g;
  }
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email, 1);
}
upload_enhanced_conversions_for_web.pl

Wypełnianie obiektów ConversionAdjustment

W sekcji poniżej pokazujemy, jak utworzyć korektę ulepszenia, która zawiera identyfikator zamówienia oraz identyfikatory adresu e-mail, numeru telefonu i adresu pocztowego, ze standardyzacją i szyfrowaniem w razie potrzeby. Zalecamy uwzględnienie gclid w dostosowaniu, jeśli jest ono dostępne.

Ten krok jest niemal identyczny z krokiem opisanym w przewodniku Importowanie dostosowań konwersji, z kilkoma wyjątkami:

  • Wypełnij pole user_identifiers znormalizowanymi i zaszyfrowanymi danymi użytkowników. Jeśli masz kilka identyfikatorów użytkowników, utwórz osobny UserIdentifier dla każdego z nich (maksymalnie 5 identyfikatorów).

Java

// Creates a builder for constructing the enhancement adjustment.
ConversionAdjustment.Builder enhancementBuilder =
    ConversionAdjustment.newBuilder().setAdjustmentType(ConversionAdjustmentType.ENHANCEMENT);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Email address that includes a period (.) before the Gmail domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("orderId", orderId)
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (conversionDateTime != null) {
  rawRecordBuilder.put("conversionDateTime", conversionDateTime);
}
if (userAgent != null) {
  rawRecordBuilder.put("userAgent", userAgent);
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (rawRecord.containsKey("phone")) {
  UserIdentifier hashedPhoneNumberIdentifier =
      UserIdentifier.newBuilder()
          .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
          .build();
  // Adds the hashed phone number identifier to the UserData object's list.
  userIdentifiers.add(hashedPhoneNumberIdentifier);
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (rawRecord.containsKey("firstName")) {
  // Checks if the record contains all the other required elements of a mailing address.
  Set<String> missingAddressKeys = new HashSet<>();
  for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
    if (!rawRecord.containsKey(addressKey)) {
      missingAddressKeys.add(addressKey);
    }
  }

  if (!missingAddressKeys.isEmpty()) {
    System.out.printf(
        "Skipping addition of mailing address information because the following required keys"
            + " are missing: %s%n",
        missingAddressKeys);
  } else {
    // Creates an OfflineUserAddressInfo object that contains all the required elements of a
    // mailing address.
    OfflineUserAddressInfo addressInfo =
        OfflineUserAddressInfo.newBuilder()
            .setHashedFirstName(
                normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
            .setHashedLastName(normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
            .setCountryCode(rawRecord.get("countryCode"))
            .setPostalCode(rawRecord.get("postalCode"))
            .build();
    UserIdentifier addressIdentifier =
        UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
    // Adds the address identifier to the UserData object's list.
    userIdentifiers.add(addressIdentifier);
  }
}

// Adds the user identifiers to the enhancement adjustment.
enhancementBuilder.addAllUserIdentifiers(userIdentifiers);
UploadEnhancedConversionsForWeb.java

C#

// Normalize and hash the raw data, then wrap it in UserIdentifier objects.
// Create a separate UserIdentifier object for each. The data in this example is
// hardcoded, but in your application you might read the raw data from an input file.
//
// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
// is a oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
// only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
// or address-info. Setting more than one of these attributes on the same UserIdentifier
// will clear all the other members of the oneof. For example, the following code is
// INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
// UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
// {
//         HashedEmail = "..."
//         HashedPhoneNumber = "..."
// }
UserIdentifier addressIdentifier = new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        HashedFirstName = NormalizeAndHash("Dana"),
        HashedLastName = NormalizeAndHash("Quinn"),
        HashedStreetAddress = NormalizeAndHash("1600 Amphitheatre Pkwy"),
        City = "Mountain View",
        State = "CA",
        PostalCode = "94043",
        CountryCode = "US"
    },
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
};

// Creates a user identifier using the hashed email address.
UserIdentifier emailIdentifier = new UserIdentifier()
{
    UserIdentifierSource = UserIdentifierSource.FirstParty,
    // Uses the normalize and hash method specifically for email addresses.
    HashedEmail = NormalizeAndHashEmailAddress("dana@example.com")
};

// Adds the user identifiers to the enhancement adjustment.
enhancement.UserIdentifiers.AddRange(new[] { addressIdentifier, emailIdentifier });
UploadEnhancedConversionsForWeb.cs

PHP

// Creates the conversion enhancement.
$enhancement =
    new ConversionAdjustment(['adjustment_type' => ConversionAdjustmentType::ENHANCEMENT]);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded,
// but in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'currencyCode' => 'USD'
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (array_key_exists('firstName', $rawRecord)) {
    // Checks if the record contains all the other required elements of a mailing
    // address.
    $missingAddressKeys = [];
    foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
        if (!array_key_exists($addressKey, $rawRecord)) {
            $missingAddressKeys[] = $addressKey;
        }
    }
    if (!empty($missingAddressKeys)) {
        printf(
            "Skipping addition of mailing address information because the "
            . "following required keys are missing: %s%s",
            json_encode($missingAddressKeys),
            PHP_EOL
        );
    } else {
        // Creates an OfflineUserAddressInfo object that contains all the required
        // elements of a mailing address.
        $addressIdentifier = new UserIdentifier([
            'address_info' => new OfflineUserAddressInfo([
                'hashed_first_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['firstName'],
                    false
                ),
                'hashed_last_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['lastName'],
                    false
                ),
                'country_code' => $rawRecord['countryCode'],
                'postal_code' => $rawRecord['postalCode']
            ])
        ]);
        // Adds the address identifier to the user identifiers list.
        $userIdentifiers[] = $addressIdentifier;
    }
}

// Adds the user identifiers to the conversion.
$enhancement->setUserIdentifiers($userIdentifiers);
UploadEnhancedConversionsForWeb.php

Python

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name": "Alex",
    "last_name": "Quinn",
    "country_code": "US",
    "postal_code": "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id": order_id,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "currency_code": "USD",
    "user_agent": user_agent,
}

# Constructs the enhancement adjustment.
conversion_adjustment = client.get_type("ConversionAdjustment")
conversion_adjustment.adjustment_type = (
    client.enums.ConversionAdjustmentTypeEnum.ENHANCEMENT
)

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_email = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the email identifier to the conversion adjustment.
conversion_adjustment.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    conversion_adjustment.user_identifiers.append(phone_identifier)

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
if raw_record.get("first_name") is not None:
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = [
        key for key in required_keys if key not in raw_record.keys()
    ]
    if len(missing_keys) > 0:
        print(
            "Skipping addition of mailing address information because the"
            f"following required keys are missing: {missing_keys}"
        )
    else:
        # Creates a user identifier using sample values for the user address,
        # hashing where required.
        address_identifier = client.get_type("UserIdentifier")
        address_info = address_identifier.address_info
        address_info.hashed_first_name = normalize_and_hash(
            raw_record["first_name"]
        )
        address_info.hashed_last_name = normalize_and_hash(
            raw_record["last_name"]
        )
        address_info.country_code = raw_record["country_code"]
        address_info.postal_code = raw_record["postal_code"]
        # Adds the address identifier to the conversion adjustment.
        conversion_adjustment.user_identifiers.append(address_identifier)
upload_enhanced_conversions_for_web.py

Ruby

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email" => "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name" => "Alex",
    "last_name" => "Quinn",
    "country_code" => "US",
    "postal_code" => "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone" => "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id" => order_id,
    "conversion_action_id" => conversion_action_id,
    "conversion_date_time" => conversion_date_time,
    "currency_code" => "USD",
    "user_agent" => user_agent,
}

enhancement = client.resource.conversion_adjustment do |ca|
  ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  ca.adjustment_type = :ENHANCEMENT
  ca.order_id = order_id

  # Sets the conversion date and time if provided. Providing this value is
  # optional but recommended.
  unless conversion_date_time.nil?
    ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
      pair.conversion_date_time = conversion_date_time
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  ca.user_identifiers << client.resource.user_identifier do |ui|
    # Uses the normalize and hash method specifically for email addresses.
    ui.hashed_email = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end

  # Checks if the record has all the required mailing address elements, and if
  # so, adds a UserIdentifier for the mailing address.
  unless raw_record["first_name"].nil?
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = required_keys - raw_record.keys
    if missing_keys
        puts(
            "Skipping addition of mailing address information because the" \
            "following required keys are missing: #{missing_keys}"
        )
    else
      ca.user_identifiers << client.resource.user_identifier do |ui|
        ui.address_info = client.resource.offline_user_address_info do |info|
          # Certain fields must be hashed using SHA256 in order to handle
          # identifiers in a privacy-safe way, as described at
          # https://support.google.com/google-ads/answer/9888656.
          info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
          info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
          info.postal_code = normalize_and_hash(raw_record["country_code"])
          info.country_code = normalize_and_hash(raw_record["postal_code"])
        end
      end
    end
  end
upload_enhanced_conversions_for_web.rb

Perl

# Construct the enhancement adjustment.
my $enhancement =
  Google::Ads::GoogleAds::V20::Services::ConversionAdjustmentUploadService::ConversionAdjustment
  ->new({
    adjustmentType => ENHANCEMENT
  });

# Extract user email, phone, and address info from the raw data,
# normalize and hash it, then wrap it in UserIdentifier objects.
# Create a separate UserIdentifier object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Address that includes all four required elements: first name, last
  # name, country code, and postal code.
  firstName   => 'Alex',
  lastName    => 'Quinn',
  countryCode => 'US',
  postalCode  => '94045',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  currencyCode       => "USD",
  userAgent          => $user_agent,
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Check if the record has a phone number, and if so, add a UserIdentifier for it.
if (defined $raw_record->{phone}) {
  # Add the hashed phone number identifier to the list of UserIdentifiers.
  push(
    @$user_identifiers,
    Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
        hashedPhoneNumber => normalize_and_hash($raw_record->{phone}, 1)}));
}

# Confirm the record has all the required mailing address elements, and if so, add
# a UserIdentifier for the mailing address.
if (defined $raw_record->{firstName}) {
  my $required_keys = ["lastName", "countryCode", "postalCode"];
  my $missing_keys  = [];

  foreach my $key (@$required_keys) {
    if (!defined $raw_record->{$key}) {
      push(@$missing_keys, $key);
    }
  }

  if (@$missing_keys) {
    print
      "Skipping addition of mailing address information because the following"
      . "keys are missing: "
      . join(",", @$missing_keys);
  } else {
    push(
      @$user_identifiers,
      Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
          addressInfo =>
            Google::Ads::GoogleAds::V20::Common::OfflineUserAddressInfo->new({
              # First and last name must be normalized and hashed.
              hashedFirstName => normalize_and_hash($raw_record->{firstName}),
              hashedLastName  => normalize_and_hash($raw_record->{lastName}),
              # Country code and zip code are sent in plain text.
              countryCode => $raw_record->{countryCode},
              postalCode  => $raw_record->{postalCode},
            })}));
  }
}

# Add the user identifiers to the enhancement adjustment.
$enhancement->{userIdentifiers} = $user_identifiers;
upload_enhanced_conversions_for_web.pl

  • Ustaw wartość parametru order_id na identyfikator zamówienia konwersji, która ma zostać dostosowana. Powinien on być zgodny z identyfikatorem zamówienia przesłanym przez tag.

  • Ustaw adjustment_type na ENHANCEMENT.

  • Ustaw conversion_action na nazwę zasobu ConversionAction z wartością type równą WEBPAGE.

  • (Opcjonalnie) Jeśli to możliwe, wypełnij pole gclid_date_time_pair dla najdokładniejszych pomiarów. Ustaw conversion_date_time na datę i godzinę wystąpienia konwersji z określonym parametrem order_id. Podaj przesunięcie strefy czasowej i użyj formatu yyyy-mm-dd HH:mm:ss+|-HH:mm, np. 2022-01-01 19:32:45-05:00 (z pominięciem czasu letniego).

  • (Opcjonalnie) Ustaw parametr user_agent na klienta użytkownika żądania, które wysłało pierwotną konwersję, aby konwersja i jej ulepszenie były przypisywane jako konwersje na tym samym urządzeniu lub na różnych urządzeniach.

Java

// Sets the conversion action.
enhancementBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancementBuilder.setOrderId(rawRecord.get("orderId"));

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (rawRecord.containsKey("conversionDateTime")) {
  enhancementBuilder.setGclidDateTimePair(
      GclidDateTimePair.newBuilder()
          .setConversionDateTime(rawRecord.get("conversionDateTime")));
}

// Sets the user agent if provided. This should match the user agent of the request that sent
// the original conversion so the conversion and its enhancement are either both attributed as
// same-device or both attributed as cross-device.
if (rawRecord.containsKey("userAgent")) {
  enhancementBuilder.setUserAgent(rawRecord.get("userAgent"));
}
UploadEnhancedConversionsForWeb.java

C#

// Set the conversion action.
enhancement.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);

// Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancement.OrderId = orderId;

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (string.IsNullOrEmpty(conversionDateTime))
{
    enhancement.GclidDateTimePair = new GclidDateTimePair()
    {
        ConversionDateTime = conversionDateTime
    };
}

// Sets optional fields where a value was provided.
if (!string.IsNullOrEmpty(userAgent))
{
    // Sets the user agent. This should match the user agent of the request that
    // sent the original conversion so the conversion and its enhancement are either
    // both attributed as same-device or both attributed as cross-device.
    enhancement.UserAgent = userAgent;
}

UploadEnhancedConversionsForWeb.cs

PHP

// Sets the conversion action.
$enhancement->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
if (!empty($rawRecord['orderId'])) {
    $enhancement->setOrderId($rawRecord['orderId']);
}

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (!empty($rawRecord['conversionDateTime'])) {
    // Sets the conversion date and time if provided. Providing this value is optional but
    // recommended.
    $enhancement->setGclidDateTimePair(new GclidDateTimePair([
        'conversion_date_time' => $rawRecord['conversionDateTime']
    ]));
}

// Sets the user agent if provided. This should match the user agent of the request that
// sent the original conversion so the conversion and its enhancement are either both
// attributed as same-device or both attributed as cross-device.
if (!empty($rawRecord['userAgent'])) {
    $enhancement->setUserAgent($rawRecord['userAgent']);
}
UploadEnhancedConversionsForWeb.php

Python

conversion_action_service = client.get_service("ConversionActionService")
# Sets the conversion action.
conversion_adjustment.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)

# Sets the order ID. Enhancements MUST use order ID instead of GCLID
# date/time pair.
conversion_adjustment.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
if raw_record.get("conversion_date_time"):
    conversion_adjustment.gclid_date_time_pair.conversion_date_time = (
        raw_record["conversion_date_time"]
    )

# Sets optional fields where a value was provided
if raw_record.get("user_agent"):
    # Sets the user agent. This should match the user agent of the request
    # that sent the original conversion so the conversion and its
    # enhancement are either both attributed as same-device or both
    # attributed as cross-device.
    conversion_adjustment.user_agent = user_agent
upload_enhanced_conversions_for_web.py

Ruby

ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
ca.adjustment_type = :ENHANCEMENT
ca.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
unless conversion_date_time.nil?
  ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
    pair.conversion_date_time = conversion_date_time
  end
end

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
ca.user_identifiers << client.resource.user_identifier do |ui|
  # Uses the normalize and hash method specifically for email addresses.
  ui.hashed_email = normalize_and_hash_email(raw_record["email"])
  # Optional: Specifies the user identifier source.
  ui.user_identifier_source = :FIRST_PARTY
end

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
unless raw_record["phone"].nil?
  ca.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
  end
end

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
unless raw_record["first_name"].nil?
  # Checks if the record contains all the other required elements of a
  # mailing address.
  required_keys = ["last_name", "country_code", "postal_code"]
  # Builds a new list of the required keys that are missing from
  # raw_record.
  missing_keys = required_keys - raw_record.keys
  if missing_keys
      puts(
          "Skipping addition of mailing address information because the" \
          "following required keys are missing: #{missing_keys}"
      )
  else
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.address_info = client.resource.offline_user_address_info do |info|
        # Certain fields must be hashed using SHA256 in order to handle
        # identifiers in a privacy-safe way, as described at
        # https://support.google.com/google-ads/answer/9888656.
        info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
        info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
        info.postal_code = normalize_and_hash(raw_record["country_code"])
        info.country_code = normalize_and_hash(raw_record["postal_code"])
      end
    end
  end
end

# Sets optional fields where a value was provided.
unless user_agent.nil?
  # Sets the user agent. This should match the user agent of the request
  # that sent the original conversion so the conversion and its enhancement
  # are either both attributed as same-device or both attributed as
  # cross-device.
  ca.user_agent = user_agent
end
upload_enhanced_conversions_for_web.rb

Perl

# Set the conversion action.
$enhancement->{conversionAction} =
  Google::Ads::GoogleAds::V20::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});

# Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
$enhancement->{orderId} = $raw_record->{orderId};

# Set the conversion date and time if provided. Providing this value is optional
# but recommended.
if (defined $raw_record->{conversionDateTime}) {
  $enhancement->{gclidDateTimePair} =
    Google::Ads::GoogleAds::V20::Services::ConversionAdjustmentUploadService::GclidDateTimePair
    ->new({
      conversionDateTime => $raw_record->{conversionDateTime}});
}

# Set the user agent if provided. This should match the user agent of the
# request that sent the original conversion so the conversion and its enhancement
# are either both attributed as same-device or both attributed as cross-device.
if (defined $raw_record->{userAgent}) {
  $enhancement->{userAgent} = $raw_record->{userAgent};
}
upload_enhanced_conversions_for_web.pl

Ulepszenia importu konwersji

Java

// Creates the conversion adjustment upload service client.
try (ConversionAdjustmentUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionAdjustmentUploadServiceClient()) {
  // Uploads the enhancement adjustment. Partial failure should always be set to true.

  // NOTE: This request contains a single adjustment as a demonstration. However, if you have
  // multiple adjustments to upload, it's best to upload multiple adjustments per request
  // instead of sending a separate request per adjustment. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
  UploadConversionAdjustmentsResponse response =
      conversionUploadServiceClient.uploadConversionAdjustments(
          UploadConversionAdjustmentsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversionAdjustments(enhancementBuilder)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
UploadEnhancedConversionsForWeb.java

C#

// Uploads the enhancement adjustment. Partial failure should always be set to true.
//
// NOTE: This request contains a single adjustment as a demonstration.
// However, if you have multiple adjustments to upload, it's best to upload
// multiple adjustmenst per request instead of sending a separate request per
// adjustment. See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjust
UploadConversionAdjustmentsResponse response =
    conversionAdjustmentUploadService.UploadConversionAdjustments(
        new UploadConversionAdjustmentsRequest()
        {
            CustomerId = customerId.ToString(),
            ConversionAdjustments = { enhancement },
            // Enables partial failure (must be true).
            PartialFailure = true,
        });
UploadEnhancedConversionsForWeb.cs

PHP

// Issues a request to upload the conversion enhancement.
$conversionAdjustmentUploadServiceClient =
    $googleAdsClient->getConversionAdjustmentUploadServiceClient();
// NOTE: This request contains a single adjustment as a demonstration. However, if you have
// multiple adjustments to upload, it's best to upload multiple adjustments per request
// instead of sending a separate request per adjustment. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
$response = $conversionAdjustmentUploadServiceClient->uploadConversionAdjustments(
    // Enables partial failure (must be true).
    UploadConversionAdjustmentsRequest::build($customerId, [$enhancement], true)
);
UploadEnhancedConversionsForWeb.php

Python

# Creates the conversion adjustment upload service client.
conversion_adjustment_upload_service = client.get_service(
    "ConversionAdjustmentUploadService"
)
# Uploads the enhancement adjustment. Partial failure should always be set
# to true.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's still best to upload them in a single
# request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_adjustment_upload_service.upload_conversion_adjustments(
    customer_id=customer_id,
    conversion_adjustments=[conversion_adjustment],
    # Enables partial failure (must be true).
    partial_failure=True,
)
upload_enhanced_conversions_for_web.py

Ruby

response = client.service.conversion_adjustment_upload.upload_conversion_adjustments(
  customer_id: customer_id,
  # NOTE: This request only uploads a single conversion, but if you have
  # multiple conversions to upload, it's still best to upload them in a single
  # request. See the following for per-request limits for reference:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  conversion_adjustments: [enhancement],
  # Partial failure must be set to true.
  partial_failure: true,
)
upload_enhanced_conversions_for_web.rb

Perl

# Upload the enhancement adjustment. Partial failure should always be set to true.
#
# NOTE: This request contains a single adjustment as a demonstration.
# However, if you have multiple adjustments to upload, it's best to
# upload multiple adjustments per request instead of sending a separate
# request per adjustment. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
my $response =
  $api_client->ConversionAdjustmentUploadService()
  ->upload_conversion_adjustments({
    customerId            => $customer_id,
    conversionAdjustments => [$enhancement],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
upload_enhanced_conversions_for_web.pl

Sprawdzanie importów

Użyj raportu z diagnostyki interfejsu API konwersji rozszerzonych, aby sprawdzić, czy konwersje rozszerzone w kampaniach internetowych działają prawidłowo, i wykrywać problemy z konfiguracją.

Użyj diagnostyki danych offline, aby sprawdzić ogólny stan ostatnich importów.

Podczas raportowania danych o konwersjach w kampaniach zapoznaj się z mapowaniem danych interfejsu, aby powiązać dane interfejsu Google Ads z polami raportowania interfejsu Google Ads API. Możesz też wysłać zapytanie do zasobu conversion_action, aby wyświetlić łączną liczbę konwersji i łączną wartość konwersji w przypadku danej działania powodującego konwersję.

Sprawdzone metody

Podczas wdrażania konwersji rozszerzonych w przypadku internetu pamiętaj o tych sprawdzonych metodach.

Sprawdź identyfikator klienta

Podczas importowania konwersji identyfikator klienta musi być ustawiony na konto, które zawiera działanie powodujące konwersję i które śledzi konwersje. Aby sprawdzić to ustawienie, wyślij zapytanie do zasobu Google Ads Customer o wartość parametru ConversionTrackingSetting. Wyślij to zapytanie z wartością GoogleAdsService.SearchStream, aby znaleźć wartość customer.conversion_tracking_setting.google_ads_conversion_customer.

SELECT
  customer.conversion_tracking_setting.google_ads_conversion_customer,
  customer.conversion_tracking_setting.conversion_tracking_status,
  customer.conversion_tracking_setting.conversion_tracking_id,
  customer.conversion_tracking_setting.cross_account_conversion_tracking_id
FROM customer

W żądaniach importowania konwersji ustaw wartość customer_id na google_ads_conversion_customer.

Jeśli masz kilka identyfikatorów, podaj je wszystkie.

Jeśli masz identyfikator kliknięcia Google dla konwersji, zalecamy wysyłanie go oprócz parametru user_identifiers, aby zwiększyć skuteczność. Jeśli masz więcej niż jeden UserIdentifier dla konwersji, uwzględnienie wszystkich tych wartości może zwiększyć prawdopodobieństwo dopasowania. Umieść wszystkie identyfikatory w tym samym plikuConversionAdjustment.

Sprawdzanie błędów częściowej awarii podczas konfigurowania integracji

Gdy po raz pierwszy konfigurujesz integrację konwersji rozszerzonych w kampaniach internetowych, sprawdź i rozwiąż wszelkie błędy częściowe w partial_failure_error odpowiedzi. Jeśli w konfiguracji występują problemy, możesz sprawdzić to pole, aby je zbadać i rozwiązać. Więcej informacji i przykładów związanych z obsługą błędów częściowego niepowodzenia znajdziesz w odpowiednim przewodniku.

Gdy rozwiążesz problemy, które spowodowały błędy częściowego niepowodzenia, i zakończysz integrację, zacznij korzystać z diagnostyki danych offline, aby regularnie sprawdzać stan konwersji.

Grupowanie wielu dostosowań w jednym żądaniu

Jeśli masz do zaimportowania wiele dostosowań, połącz operacje w jedną UploadConversionAdjustmentsRequest zamiast wysyłać prośbę o importowanie dla każdego dostosowania.

W przewodniku po limitach znajdziesz informacje o limitach liczby korekt w jednym żądaniu. Jeśli chcesz, aby diagnostyka danych offline grupowała zestaw żądań w ramach tego samego zadania logicznego, ustaw job_id wszystkich żądań na tę samą wartość.

Rozwiązywanie problemów

Użyj raportu z diagnostyki interfejsu API konwersji rozszerzonych, aby sprawdzić, czy konwersje rozszerzone w kampaniach internetowych działają prawidłowo, i wykrywać problemy z konfiguracją.

Debugowanie typowych błędów

Błąd
CONVERSION_NOT_FOUND Nie udało się znaleźć konwersji powiązanej z podaną parą działania powodującego konwersję i identyfikatora konwersji.order_id Sprawdź, czy konwersja jest konwersją Google Ads dla klienta konwersji Google Ads określonego w customer_id żądania.
Dodatkowo sprawdź, czy konwersja nie została zarejestrowana w przypadku kliknięcia, w którym zamiast gclid wypełniono pole gbraid lub wbraid. Google Ads nie obsługuje w przypadku tych konwersji konwersji rozszerzonych w kampaniach internetowych.
CUSTOMER_NOT_ACCEPTED_CUSTOMER_DATA_TERMS Warunki dotyczące danych klienta nie zostały zaakceptowane w przypadku customer_id żądania. Instrukcje znajdziesz w przewodniku dotyczącym wymagań wstępnych.
CONVERSION_ALREADY_ENHANCED Ta konwersja ma już dostosowanie z podanymi wartościami order_id i conversion_action. Pamiętaj, aby podać unikalny atrybut order_id dla każdej konwersji.
CONVERSION_ACTION_NOT_ELIGIBLE_FOR_ENHANCEMENT Podany conversion_action nie kwalifikuje się do konwersji rozszerzonych w kampaniach internetowych. W interfejsie Google Ads zaznacz pole Włącz konwersje rozszerzone w przypadku działania powodującego konwersję, do którego odwołuje się Twoja prośba. Instrukcje znajdziesz w Centrum pomocy.
Wstecz
Zarządzanie konwersjami offline
Dalej
Zarządzanie konwersjami telefonicznymi