إدارة الإحالات الناجحة الناتجة عن النقرات على الإنترنت

يمكنك استخدام Google Ads API لإدارة الإحالات الناجحة الناتجة عن النقرات على الإنترنت في "إعلانات Google". تساعدك الإحالات الناجحة الناتجة عن النقرات على الإنترنت في تتبُّع الإعلانات التي أدّت إلى تحقيق مبيعات على الإنترنت، مثل الشراء من خلال موقع إلكتروني.

يتم تتبُّع الإحالات الناجحة على الإنترنت باستخدام علامة Google، ولكن يمكنك تعديلها أو تحسينها باستخدام Google Ads API.

إذا سبق لك إعداد علامة Google وأردت تعديل إحالاتك الناجحة على الإنترنت، اطّلِع على صفحة تعديلات الإحالات الناجحة. إذا كنت قد أعددت علامة Google وأردت تحسين إحالاتك الناجحة على الإنترنت باستخدام البيانات المقدَّمة من المستخدِم، والتي تُعرف أيضًا باسم الإحالات الناجحة المحسّنة للويب، يُرجى مواصلة القراءة.

الإحالات الناجحة المحسّنة للويب

يوضّح القسم التالي كيفية تحسين الإحالات الناجحة الناتجة عن النقرات على الإنترنت، والتي تُعرف أيضًا باسم الإحالات الناجحة المحسّنة للويب.

تتطلّب ميزة "الإحالات الناجحة المحسّنة للويب" إعداد علامة تُرسِل تلقائيًا معرّف نقرة، مثل معرّف النقرة من Google‏ (GCLID)، ومعرّف طلب إلى "إعلانات Google" عندما يُجري مستخدم إحالة ناجحة. يمكنك إعداد ميزة الإحالات الناجحة المحسّنة من خلال أداة "إدارة العلامات من Google" أو علامة Google أو Google Ads API. يمنحك استخدام Google Ads API ميزة إرسال بيانات الإحالات الناجحة التي تخصّ الطرف الأول خلال 24 ساعة من حدث الإحالة الناجحة، بدلاً من إرسالها في الوقت نفسه. يتيح لك ذلك تحديد موقع بيانات الطرف الأول من مجموعة متنوعة من المصادر، مثل قاعدة بيانات العملاء أو نظام إدارة علاقات العملاء.

طريقة عمل ميزة "الإحالات الناجحة المحسّنة للويب"

تُكمِّل ميزة "الإحالات الناجحة المحسّنة للويب" في Google Ads API الخطوة 3 في مسار المعالجة التالي:

بدلاً من إرسال معلومات المستخدِم المجزّأة عندما يُجري المستخدِم إحالة ناجحة، تُرسِل العلامة معرّف GCLID ومعرّف الطلب فقط، وتُرسِل معلومات المستخدِم المجزّأة لاحقًا من خلال استيراد معرّف الطلب مع البيانات المجزّأة. لمزيد من المعلومات حول عمليات التحويل المحسّنة للويب، يُرجى الاطّلاع على مركز المساعدة.

ميزة "الإحالات الناجحة المحسّنة" لل الويب

المتطلبات الأساسية

يجب قبول أحكام بيانات العملاء قبل أن تتمكّن من استخدام ميزة "الإحالات الناجحة المحسّنة للويب". يمكنك التحقّق مما إذا تم قبول أحكام بيانات العملاء من خلال إصدار الطلب التالي إلى العميل لإحالة الناجحة في "إعلانات Google":

SELECT
  customer.id,
  customer.conversion_tracking_setting.accepted_customer_data_terms
FROM customer

إذا كان accepted_customer_data_terms هو false، اتّبِع التعليمات الواردة في مركز المساعدة لإكمال هذا الشرط الأساسي.

ضبط ميزة وضع العلامات

يمكنك ضبط ميزة وضع العلامات لموقعك الإلكتروني باتّباع التعليمات الواردة في مركز المساعدة. ننصح أيضًا بإضافة معرّفات المعاملات (معرّفات الطلبات) إلى علامة تتبُّع الإحالات الناجحة للمساعدة في مطابقة الإحالات الناجحة.

تنفيذ واجهة برمجة التطبيقات

في ما يلي الخطوات العامة لاستيراد ميزة "الإحالات الناجحة المحسّنة للويب" في Google Ads API.

  1. تسويف البيانات المقدَّمة من المستخدِم وتجزئتها، مثل عنوان البريد الإلكتروني ورقم الهاتف والعنوان البريدي

  2. املأ عناصر ConversionAdjustment بالبيانات المقدَّمة من المستخدِم التي تمّت تسويتها وتجزئتها.

  3. استورِد عناصر ConversionAdjustment إلى ConversionAdjustmentUploadService.

  4. راجِع عمليات الاستيراد.

تسويت البيانات المقدَّمة من المستخدِم وتجزئتها

لمراعاة اعتبارات الخصوصية، يجب تجزئة البيانات التالية باستخدام SHA-256 قبل استيرادها:

  • عنوان البريد الإلكتروني
  • رقم الهاتف
  • الاسم الأول
  • اسم العائلة
  • عنوان الشارع

يجب عدم تجزئة البيانات التالية:

  • البلد
  • الولاية
  • المدينة
  • الرمز البريدي

لتوحيد نتائج التجزئة، عليك إجراء ما يلي قبل تجزئة إحدى هذه القيم:

  • إزالة المسافات البيضاء البادئة واللاحقة
  • تحويل النص إلى أحرف لاتينية صغيرة
  • تنسيق أرقام الهواتف وفقًا لمعيار E164
  • إزالة جميع النقاط (.) التي تسبق اسم النطاق في عناوين البريد الإلكتروني gmail.com و googlemail.com

Java

private String normalizeAndHash(MessageDigest digest, String s, boolean trimIntermediateSpaces)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  if (trimIntermediateSpaces) {
    // Removes leading, trailing, and intermediate spaces.
    normalized = normalized.replaceAll("\\s+", "");
  } else {
    // Removes only leading and trailing spaces.
    normalized = normalized.trim();
  }
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail, true);
}
UploadEnhancedConversionsForWeb.java

#C

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
UploadEnhancedConversionsForWeb.cs

PHP

private static function normalizeAndHash(
    string $hashAlgorithm,
    string $value,
    bool $trimIntermediateSpaces
): string {
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    if ($trimIntermediateSpaces === true) {
        // Removes leading, trailing, and intermediate spaces.
        $normalized = str_replace(' ', '', $normalized);
    } else {
        // Removes only leading and trailing spaces.
        $normalized = trim($normalized);
    }
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail, true);
}
UploadEnhancedConversionsForWeb.php

Python

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.strip().lower()
    email_parts = normalized_email.split("@")

    # Check that there are at least two segments
    if len(email_parts) > 1:
        # Checks whether the domain of the email address is either "gmail.com"
        # or "googlemail.com". If this regex does not match then this statement
        # will evaluate to None.
        if re.match(r"^(gmail|googlemail)\.com$", email_parts[1]):
            # Removes any '.' characters from the portion of the email address
            # before the domain if the domain is gmail.com or googlemail.com.
            email_parts[0] = email_parts[0].replace(".", "")
            normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/9888656

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
upload_enhanced_conversions_for_web.py

Ruby

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/9888656.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
upload_enhanced_conversions_for_web.rb

Perl

sub normalize_and_hash {
  my $value                    = shift;
  my $trim_intermediate_spaces = shift;

  if ($trim_intermediate_spaces) {
    $value =~ s/\s+//g;
  } else {
    $value =~ s/^\s+|\s+$//g;
  }
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email, 1);
}
upload_enhanced_conversions_for_web.pl

تعبئة عناصر ConversionAdjustment

يوضّح القسم التالي كيفية إنشاء تعديل تحسين يحتوي على معرّف الطلب، بالإضافة إلى معرّفات لعنوان البريد الإلكتروني ورقم الهاتف والعنوان الجغرافي، مع تطبيق التوحيد والتجزئة كما هو مطلوب. وفقًا لأفضل الممارسات، يمكنك تضمين gclid في التعديل إذا كان متاحًا.

تتطابق هذه الخطوة تقريبًا مع دليل استيراد تعديلات الإحالات الناجحة، مع بعض التحذيرات:

  • املأ user_identifiers ببيانات المستخدِم التي تمّت تسويتها وتجزئتها. إذا كان لديك عدة معرّفات للمستخدمين، أنشئ UserIdentifier منفصلاً لكل معرّف، بما يصل إلى خمسة معرّفات.

Java

// Creates a builder for constructing the enhancement adjustment.
ConversionAdjustment.Builder enhancementBuilder =
    ConversionAdjustment.newBuilder().setAdjustmentType(ConversionAdjustmentType.ENHANCEMENT);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Email address that includes a period (.) before the Gmail domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("orderId", orderId)
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (conversionDateTime != null) {
  rawRecordBuilder.put("conversionDateTime", conversionDateTime);
}
if (userAgent != null) {
  rawRecordBuilder.put("userAgent", userAgent);
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (rawRecord.containsKey("phone")) {
  UserIdentifier hashedPhoneNumberIdentifier =
      UserIdentifier.newBuilder()
          .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
          .build();
  // Adds the hashed phone number identifier to the UserData object's list.
  userIdentifiers.add(hashedPhoneNumberIdentifier);
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (rawRecord.containsKey("firstName")) {
  // Checks if the record contains all the other required elements of a mailing address.
  Set<String> missingAddressKeys = new HashSet<>();
  for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
    if (!rawRecord.containsKey(addressKey)) {
      missingAddressKeys.add(addressKey);
    }
  }

  if (!missingAddressKeys.isEmpty()) {
    System.out.printf(
        "Skipping addition of mailing address information because the following required keys"
            + " are missing: %s%n",
        missingAddressKeys);
  } else {
    // Creates an OfflineUserAddressInfo object that contains all the required elements of a
    // mailing address.
    OfflineUserAddressInfo addressInfo =
        OfflineUserAddressInfo.newBuilder()
            .setHashedFirstName(
                normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
            .setHashedLastName(normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
            .setCountryCode(rawRecord.get("countryCode"))
            .setPostalCode(rawRecord.get("postalCode"))
            .build();
    UserIdentifier addressIdentifier =
        UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
    // Adds the address identifier to the UserData object's list.
    userIdentifiers.add(addressIdentifier);
  }
}

// Adds the user identifiers to the enhancement adjustment.
enhancementBuilder.addAllUserIdentifiers(userIdentifiers);
UploadEnhancedConversionsForWeb.java

#C

// Normalize and hash the raw data, then wrap it in UserIdentifier objects.
// Create a separate UserIdentifier object for each. The data in this example is
// hardcoded, but in your application you might read the raw data from an input file.
//
// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
// is a oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
// only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
// or address-info. Setting more than one of these attributes on the same UserIdentifier
// will clear all the other members of the oneof. For example, the following code is
// INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
// UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
// {
//         HashedEmail = "..."
//         HashedPhoneNumber = "..."
// }
UserIdentifier addressIdentifier = new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        HashedFirstName = NormalizeAndHash("Dana"),
        HashedLastName = NormalizeAndHash("Quinn"),
        HashedStreetAddress = NormalizeAndHash("1600 Amphitheatre Pkwy"),
        City = "Mountain View",
        State = "CA",
        PostalCode = "94043",
        CountryCode = "US"
    },
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
};

// Creates a user identifier using the hashed email address.
UserIdentifier emailIdentifier = new UserIdentifier()
{
    UserIdentifierSource = UserIdentifierSource.FirstParty,
    // Uses the normalize and hash method specifically for email addresses.
    HashedEmail = NormalizeAndHashEmailAddress("dana@example.com")
};

// Adds the user identifiers to the enhancement adjustment.
enhancement.UserIdentifiers.AddRange(new[] { addressIdentifier, emailIdentifier });
UploadEnhancedConversionsForWeb.cs

PHP

// Creates the conversion enhancement.
$enhancement =
    new ConversionAdjustment(['adjustment_type' => ConversionAdjustmentType::ENHANCEMENT]);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded,
// but in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'currencyCode' => 'USD'
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (array_key_exists('firstName', $rawRecord)) {
    // Checks if the record contains all the other required elements of a mailing
    // address.
    $missingAddressKeys = [];
    foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
        if (!array_key_exists($addressKey, $rawRecord)) {
            $missingAddressKeys[] = $addressKey;
        }
    }
    if (!empty($missingAddressKeys)) {
        printf(
            "Skipping addition of mailing address information because the "
            . "following required keys are missing: %s%s",
            json_encode($missingAddressKeys),
            PHP_EOL
        );
    } else {
        // Creates an OfflineUserAddressInfo object that contains all the required
        // elements of a mailing address.
        $addressIdentifier = new UserIdentifier([
            'address_info' => new OfflineUserAddressInfo([
                'hashed_first_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['firstName'],
                    false
                ),
                'hashed_last_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['lastName'],
                    false
                ),
                'country_code' => $rawRecord['countryCode'],
                'postal_code' => $rawRecord['postalCode']
            ])
        ]);
        // Adds the address identifier to the user identifiers list.
        $userIdentifiers[] = $addressIdentifier;
    }
}

// Adds the user identifiers to the conversion.
$enhancement->setUserIdentifiers($userIdentifiers);
UploadEnhancedConversionsForWeb.php

Python

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name": "Alex",
    "last_name": "Quinn",
    "country_code": "US",
    "postal_code": "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id": order_id,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "currency_code": "USD",
    "user_agent": user_agent,
}

# Constructs the enhancement adjustment.
conversion_adjustment = client.get_type("ConversionAdjustment")
conversion_adjustment.adjustment_type = (
    client.enums.ConversionAdjustmentTypeEnum.ENHANCEMENT
)

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_email = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the email identifier to the conversion adjustment.
conversion_adjustment.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    conversion_adjustment.user_identifiers.append(phone_identifier)

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
if raw_record.get("first_name") is not None:
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = [
        key for key in required_keys if key not in raw_record.keys()
    ]
    if len(missing_keys) > 0:
        print(
            "Skipping addition of mailing address information because the"
            f"following required keys are missing: {missing_keys}"
        )
    else:
        # Creates a user identifier using sample values for the user address,
        # hashing where required.
        address_identifier = client.get_type("UserIdentifier")
        address_info = address_identifier.address_info
        address_info.hashed_first_name = normalize_and_hash(
            raw_record["first_name"]
        )
        address_info.hashed_last_name = normalize_and_hash(
            raw_record["last_name"]
        )
        address_info.country_code = raw_record["country_code"]
        address_info.postal_code = raw_record["postal_code"]
        # Adds the address identifier to the conversion adjustment.
        conversion_adjustment.user_identifiers.append(address_identifier)
upload_enhanced_conversions_for_web.py

Ruby

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email" => "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name" => "Alex",
    "last_name" => "Quinn",
    "country_code" => "US",
    "postal_code" => "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone" => "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id" => order_id,
    "conversion_action_id" => conversion_action_id,
    "conversion_date_time" => conversion_date_time,
    "currency_code" => "USD",
    "user_agent" => user_agent,
}

enhancement = client.resource.conversion_adjustment do |ca|
  ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  ca.adjustment_type = :ENHANCEMENT
  ca.order_id = order_id

  # Sets the conversion date and time if provided. Providing this value is
  # optional but recommended.
  unless conversion_date_time.nil?
    ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
      pair.conversion_date_time = conversion_date_time
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  ca.user_identifiers << client.resource.user_identifier do |ui|
    # Uses the normalize and hash method specifically for email addresses.
    ui.hashed_email = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end

  # Checks if the record has all the required mailing address elements, and if
  # so, adds a UserIdentifier for the mailing address.
  unless raw_record["first_name"].nil?
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = required_keys - raw_record.keys
    if missing_keys
        puts(
            "Skipping addition of mailing address information because the" \
            "following required keys are missing: #{missing_keys}"
        )
    else
      ca.user_identifiers << client.resource.user_identifier do |ui|
        ui.address_info = client.resource.offline_user_address_info do |info|
          # Certain fields must be hashed using SHA256 in order to handle
          # identifiers in a privacy-safe way, as described at
          # https://support.google.com/google-ads/answer/9888656.
          info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
          info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
          info.postal_code = normalize_and_hash(raw_record["country_code"])
          info.country_code = normalize_and_hash(raw_record["postal_code"])
        end
      end
    end
  end
upload_enhanced_conversions_for_web.rb

Perl

# Construct the enhancement adjustment.
my $enhancement =
  Google::Ads::GoogleAds::V20::Services::ConversionAdjustmentUploadService::ConversionAdjustment
  ->new({
    adjustmentType => ENHANCEMENT
  });

# Extract user email, phone, and address info from the raw data,
# normalize and hash it, then wrap it in UserIdentifier objects.
# Create a separate UserIdentifier object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Address that includes all four required elements: first name, last
  # name, country code, and postal code.
  firstName   => 'Alex',
  lastName    => 'Quinn',
  countryCode => 'US',
  postalCode  => '94045',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  currencyCode       => "USD",
  userAgent          => $user_agent,
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Check if the record has a phone number, and if so, add a UserIdentifier for it.
if (defined $raw_record->{phone}) {
  # Add the hashed phone number identifier to the list of UserIdentifiers.
  push(
    @$user_identifiers,
    Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
        hashedPhoneNumber => normalize_and_hash($raw_record->{phone}, 1)}));
}

# Confirm the record has all the required mailing address elements, and if so, add
# a UserIdentifier for the mailing address.
if (defined $raw_record->{firstName}) {
  my $required_keys = ["lastName", "countryCode", "postalCode"];
  my $missing_keys  = [];

  foreach my $key (@$required_keys) {
    if (!defined $raw_record->{$key}) {
      push(@$missing_keys, $key);
    }
  }

  if (@$missing_keys) {
    print
      "Skipping addition of mailing address information because the following"
      . "keys are missing: "
      . join(",", @$missing_keys);
  } else {
    push(
      @$user_identifiers,
      Google::Ads::GoogleAds::V20::Common::UserIdentifier->new({
          addressInfo =>
            Google::Ads::GoogleAds::V20::Common::OfflineUserAddressInfo->new({
              # First and last name must be normalized and hashed.
              hashedFirstName => normalize_and_hash($raw_record->{firstName}),
              hashedLastName  => normalize_and_hash($raw_record->{lastName}),
              # Country code and zip code are sent in plain text.
              countryCode => $raw_record->{countryCode},
              postalCode  => $raw_record->{postalCode},
            })}));
  }
}

# Add the user identifiers to the enhancement adjustment.
$enhancement->{userIdentifiers} = $user_identifiers;
upload_enhanced_conversions_for_web.pl

  • احرص على ضبط order_id على معرّف الطلب للإحالة الناجحة المطلوب تعديلها، والذي يجب أن يتطابق مع معرّف الطلب الذي تم إرساله من قِبل العلامة.

  • اضبط adjustment_type على ENHANCEMENT.

  • اضبط conversion_action على اسم المورد ConversionAction الذي يحتوي على type‏ WEBPAGE.

  • (اختياري) إذا أمكن، املأ حقل gclid_date_time_pair للحصول على القياس الأكثر دقة. اضبط conversion_date_time على التاريخ والوقت اللذَين حدثت فيهما الإحالة الناجحة التي تتضمّن order_id المحدّد. أدرِج الفرق الزمني للمنطقة الزمنية واستخدِم التنسيق yyyy-mm-dd HH:mm:ss+|-HH:mm، على سبيل المثال: 2022-01-01 19:32:45-05:00 (مع تجاهل التوقيت الصيفي) .

  • (اختياري) اضبط user_agent على وكيل المستخدم للطلب الذي أرسل الإحالة الناجحة الأصلية لكي يتمّ تحديد مصدر كلّ من الإحالة الناجحة وتحسينها على أنّه على الجهاز نفسه أو على أكثر من جهاز واحد.

Java

// Sets the conversion action.
enhancementBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancementBuilder.setOrderId(rawRecord.get("orderId"));

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (rawRecord.containsKey("conversionDateTime")) {
  enhancementBuilder.setGclidDateTimePair(
      GclidDateTimePair.newBuilder()
          .setConversionDateTime(rawRecord.get("conversionDateTime")));
}

// Sets the user agent if provided. This should match the user agent of the request that sent
// the original conversion so the conversion and its enhancement are either both attributed as
// same-device or both attributed as cross-device.
if (rawRecord.containsKey("userAgent")) {
  enhancementBuilder.setUserAgent(rawRecord.get("userAgent"));
}
UploadEnhancedConversionsForWeb.java

#C

// Set the conversion action.
enhancement.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);

// Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancement.OrderId = orderId;

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (string.IsNullOrEmpty(conversionDateTime))
{
    enhancement.GclidDateTimePair = new GclidDateTimePair()
    {
        ConversionDateTime = conversionDateTime
    };
}

// Sets optional fields where a value was provided.
if (!string.IsNullOrEmpty(userAgent))
{
    // Sets the user agent. This should match the user agent of the request that
    // sent the original conversion so the conversion and its enhancement are either
    // both attributed as same-device or both attributed as cross-device.
    enhancement.UserAgent = userAgent;
}

UploadEnhancedConversionsForWeb.cs

PHP

// Sets the conversion action.
$enhancement->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
if (!empty($rawRecord['orderId'])) {
    $enhancement->setOrderId($rawRecord['orderId']);
}

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (!empty($rawRecord['conversionDateTime'])) {
    // Sets the conversion date and time if provided. Providing this value is optional but
    // recommended.
    $enhancement->setGclidDateTimePair(new GclidDateTimePair([
        'conversion_date_time' => $rawRecord['conversionDateTime']
    ]));
}

// Sets the user agent if provided. This should match the user agent of the request that
// sent the original conversion so the conversion and its enhancement are either both
// attributed as same-device or both attributed as cross-device.
if (!empty($rawRecord['userAgent'])) {
    $enhancement->setUserAgent($rawRecord['userAgent']);
}
UploadEnhancedConversionsForWeb.php

Python

conversion_action_service = client.get_service("ConversionActionService")
# Sets the conversion action.
conversion_adjustment.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)

# Sets the order ID. Enhancements MUST use order ID instead of GCLID
# date/time pair.
conversion_adjustment.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
if raw_record.get("conversion_date_time"):
    conversion_adjustment.gclid_date_time_pair.conversion_date_time = (
        raw_record["conversion_date_time"]
    )

# Sets optional fields where a value was provided
if raw_record.get("user_agent"):
    # Sets the user agent. This should match the user agent of the request
    # that sent the original conversion so the conversion and its
    # enhancement are either both attributed as same-device or both
    # attributed as cross-device.
    conversion_adjustment.user_agent = user_agent
upload_enhanced_conversions_for_web.py

Ruby

ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
ca.adjustment_type = :ENHANCEMENT
ca.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
unless conversion_date_time.nil?
  ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
    pair.conversion_date_time = conversion_date_time
  end
end

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
ca.user_identifiers << client.resource.user_identifier do |ui|
  # Uses the normalize and hash method specifically for email addresses.
  ui.hashed_email = normalize_and_hash_email(raw_record["email"])
  # Optional: Specifies the user identifier source.
  ui.user_identifier_source = :FIRST_PARTY
end

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
unless raw_record["phone"].nil?
  ca.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
  end
end

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
unless raw_record["first_name"].nil?
  # Checks if the record contains all the other required elements of a
  # mailing address.
  required_keys = ["last_name", "country_code", "postal_code"]
  # Builds a new list of the required keys that are missing from
  # raw_record.
  missing_keys = required_keys - raw_record.keys
  if missing_keys
      puts(
          "Skipping addition of mailing address information because the" \
          "following required keys are missing: #{missing_keys}"
      )
  else
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.address_info = client.resource.offline_user_address_info do |info|
        # Certain fields must be hashed using SHA256 in order to handle
        # identifiers in a privacy-safe way, as described at
        # https://support.google.com/google-ads/answer/9888656.
        info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
        info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
        info.postal_code = normalize_and_hash(raw_record["country_code"])
        info.country_code = normalize_and_hash(raw_record["postal_code"])
      end
    end
  end
end

# Sets optional fields where a value was provided.
unless user_agent.nil?
  # Sets the user agent. This should match the user agent of the request
  # that sent the original conversion so the conversion and its enhancement
  # are either both attributed as same-device or both attributed as
  # cross-device.
  ca.user_agent = user_agent
end
upload_enhanced_conversions_for_web.rb

Perl

# Set the conversion action.
$enhancement->{conversionAction} =
  Google::Ads::GoogleAds::V20::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});

# Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
$enhancement->{orderId} = $raw_record->{orderId};

# Set the conversion date and time if provided. Providing this value is optional
# but recommended.
if (defined $raw_record->{conversionDateTime}) {
  $enhancement->{gclidDateTimePair} =
    Google::Ads::GoogleAds::V20::Services::ConversionAdjustmentUploadService::GclidDateTimePair
    ->new({
      conversionDateTime => $raw_record->{conversionDateTime}});
}

# Set the user agent if provided. This should match the user agent of the
# request that sent the original conversion so the conversion and its enhancement
# are either both attributed as same-device or both attributed as cross-device.
if (defined $raw_record->{userAgent}) {
  $enhancement->{userAgent} = $raw_record->{userAgent};
}
upload_enhanced_conversions_for_web.pl

استيراد تحسينات الإحالات الناجحة

Java

// Creates the conversion adjustment upload service client.
try (ConversionAdjustmentUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionAdjustmentUploadServiceClient()) {
  // Uploads the enhancement adjustment. Partial failure should always be set to true.

  // NOTE: This request contains a single adjustment as a demonstration. However, if you have
  // multiple adjustments to upload, it's best to upload multiple adjustments per request
  // instead of sending a separate request per adjustment. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
  UploadConversionAdjustmentsResponse response =
      conversionUploadServiceClient.uploadConversionAdjustments(
          UploadConversionAdjustmentsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversionAdjustments(enhancementBuilder)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
UploadEnhancedConversionsForWeb.java

#C

// Uploads the enhancement adjustment. Partial failure should always be set to true.
//
// NOTE: This request contains a single adjustment as a demonstration.
// However, if you have multiple adjustments to upload, it's best to upload
// multiple adjustmenst per request instead of sending a separate request per
// adjustment. See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjust
UploadConversionAdjustmentsResponse response =
    conversionAdjustmentUploadService.UploadConversionAdjustments(
        new UploadConversionAdjustmentsRequest()
        {
            CustomerId = customerId.ToString(),
            ConversionAdjustments = { enhancement },
            // Enables partial failure (must be true).
            PartialFailure = true,
        });
UploadEnhancedConversionsForWeb.cs

PHP

// Issues a request to upload the conversion enhancement.
$conversionAdjustmentUploadServiceClient =
    $googleAdsClient->getConversionAdjustmentUploadServiceClient();
// NOTE: This request contains a single adjustment as a demonstration. However, if you have
// multiple adjustments to upload, it's best to upload multiple adjustments per request
// instead of sending a separate request per adjustment. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
$response = $conversionAdjustmentUploadServiceClient->uploadConversionAdjustments(
    // Enables partial failure (must be true).
    UploadConversionAdjustmentsRequest::build($customerId, [$enhancement], true)
);
UploadEnhancedConversionsForWeb.php

Python

# Creates the conversion adjustment upload service client.
conversion_adjustment_upload_service = client.get_service(
    "ConversionAdjustmentUploadService"
)
# Uploads the enhancement adjustment. Partial failure should always be set
# to true.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's still best to upload them in a single
# request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_adjustment_upload_service.upload_conversion_adjustments(
    customer_id=customer_id,
    conversion_adjustments=[conversion_adjustment],
    # Enables partial failure (must be true).
    partial_failure=True,
)
upload_enhanced_conversions_for_web.py

Ruby

response = client.service.conversion_adjustment_upload.upload_conversion_adjustments(
  customer_id: customer_id,
  # NOTE: This request only uploads a single conversion, but if you have
  # multiple conversions to upload, it's still best to upload them in a single
  # request. See the following for per-request limits for reference:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  conversion_adjustments: [enhancement],
  # Partial failure must be set to true.
  partial_failure: true,
)
upload_enhanced_conversions_for_web.rb

Perl

# Upload the enhancement adjustment. Partial failure should always be set to true.
#
# NOTE: This request contains a single adjustment as a demonstration.
# However, if you have multiple adjustments to upload, it's best to
# upload multiple adjustments per request instead of sending a separate
# request per adjustment. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
my $response =
  $api_client->ConversionAdjustmentUploadService()
  ->upload_conversion_adjustments({
    customerId            => $customer_id,
    conversionAdjustments => [$enhancement],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
upload_enhanced_conversions_for_web.pl

مراجعة عمليات الاستيراد

استخدِم تقرير بيانات تشخيص واجهة برمجة التطبيقات للإحالات الناجحة المحسّنة للتحقّق من أنّ ميزة "الإحالات الناجحة المحسّنة للويب" تعمل بفعالية ولتشخيص المشاكل في عملية الإعداد.

استخدِم بيانات تشخيص البيانات المتوفّرة بلا إنترنت لمراجعة الحالة العامة لعمليات الاستيراد الأخيرة.

عند إعداد تقارير عن مقاييس الإحالات الناجحة لحملاتك، يمكنك الرجوع إلى مقالة ربط مقاييس واجهة المستخدِم لربط مقاييس واجهة المستخدِم في "إعلانات Google" بحقول إعداد التقارير في Google Ads API. يمكنك أيضًا إجراء طلب بحث في مورد conversion_action للاطّلاع على إجمالي عدد الإحالات الناجحة وإجمالي قيمة الإحالة الناجحة لهدف إحالة ناجحة معيّن.

أفضل الممارسات

يُرجى مراعاة أفضل الممارسات التالية عند تنفيذ ميزة الإحالات الناجحة المحسَّنة للويب.

البحث عن معرّف العميل

عند استيراد الإحالات الناجحة، يجب ضبط رقم تعريف العميل على الحساب الذي يحتوي على إجراء الإحالة الناجحة والذي يتتبّع الإحالة الناجحة. للتحقّق من هذا الإعداد، ابحث في مورد Customer لعرض "إعلانات Google" عن ConversionTrackingSetting. أدخِل طلب البحث التالي مع GoogleAdsService.SearchStream، للعثور على قيمة customer.conversion_tracking_setting.google_ads_conversion_customer.

SELECT
  customer.conversion_tracking_setting.google_ads_conversion_customer,
  customer.conversion_tracking_setting.conversion_tracking_status,
  customer.conversion_tracking_setting.conversion_tracking_id,
  customer.conversion_tracking_setting.cross_account_conversion_tracking_id
FROM customer

اضبط customer_id على القيمة google_ads_conversion_customer في طلباتك لاستيراد الإحالات الناجحة.

تضمين معرّفات متعددة إذا كانت لديك

إذا كان لديك معرّف النقرة من Google للإحالة الناجحة، ننصحك بإرساله بالإضافة إلى user_identifiers لتحسين الأداء. بالإضافة إلى ذلك، إذا كان لديك أكثر من UserIdentifier واحد للإحالة الناجحة، يمكن أن يؤدي تضمين كل هذه القيم إلى تحسين احتمالية حدوث مطابقة. أدرِج جميع المعرّفات في ConversionAdjustment نفسه.

مراجعة أخطاء الفشل الجزئي عند إعداد عملية الدمج

عند إعداد ميزة "الإحالات الناجحة المحسّنة للويب" لأول مرة، راجِع أي أخطاء جزئية في الحقل partial_failure_error في الاستجابة وعالجها. إذا كانت هناك مشاكل في عملية الإعداد، يمكنك فحص هذا الحقل للتحقيق فيها وحلّها. لمزيد من التفاصيل والأمثلة المتعلّقة بمعالجة أخطاء الانهيار الجزئي، يُرجى الانتقال إلى دليل الانهيار الجزئي المخصّص.

بعد حلّ أي مشاكل ظهرت في أخطاء الفشل الجزئي وإكمال عملية الدمج، يمكنك التبديل إلى استخدام بيانات بيانات بلا إنترنت لمراجعة صحة إحالاتك الناجحة بانتظام.

تجميع عدّة تعديلات في طلب واحد

إذا كانت لديك تعديلات متعددة لاستيرادها، يمكنك تجميع العمليات في عملية واحدة UploadConversionAdjustmentsRequest، بدلاً من إرسال طلب استيراد لكل تعديل.

اطّلِع على دليل المساحة التخزينية للاطّلاع علىحدود عدد التعديلات لكل طلب. إذا كنت تريد أن تُجمِّع بيانات التشخيص بلا إنترنت مجموعة من الطلبات ضمن المهمة المنطقية نفسها، اضبط job_id لجميع الطلبات على القيمة نفسها.

تحديد المشاكل وحلّها

استخدِم تقرير بيانات تشخيص واجهة برمجة التطبيقات للإحالات الناجحة المحسّنة للتحقّق من أنّ ميزة "الإحالات الناجحة المحسّنة للويب" تعمل بفعالية ولتشخيص المشاكل في عملية الإعداد.

تصحيح الأخطاء الشائعة

خطأ
CONVERSION_NOT_FOUND تعذّر العثور على إحالة ناجحة لزوج إجراء الإحالة الناجحة ومعرّف الإحالة الناجحة المقدَّم أو order_id. تأكَّد من أنّ الإحالة الناجحة هي إحالة ناجحة في "إعلانات Google" ل العميل الذي أجرى الإحالة الناجحة في "إعلانات Google" المحدّد في customer_id للطلب.
بالإضافة إلى ذلك، تأكَّد من أنّ الإحالة الناجحة لم تكن نتيجة نقرة تم فيها تعبئة gbraid أو wbraid بدلاً من gclid. لا تتيح "إعلانات Google" ميزة "الإحالات الناجحة المحسّنة للويب" لهذه الإحالات الناجحة.
CUSTOMER_NOT_ACCEPTED_CUSTOMER_DATA_TERMS لم يتم قبول الأحكام والشروط المتعلّقة ببيانات العملاء في customer_id من الطلب. يمكنك العثور على تعليمات حول ذلك في دليل المتطلبات الأساسية.
CONVERSION_ALREADY_ENHANCED سبق أن تلقّت هذه الإحالة الناجحة تعديلاً باستخدام order_id وconversion_action المحدّدين. احرص على تقديم قيمة order_id فريدة لكل إحالة ناجحة.
CONVERSION_ACTION_NOT_ELIGIBLE_FOR_ENHANCEMENT إنّ conversion_action المقدَّمة غير مؤهَّلة لميزة الإحالات الناجحة المحسّنة للويب. في واجهة مستخدِم "إعلانات Google"، تأكَّد من وضع علامة في مربّع تفعيل ميزة الإحالات الناجحة المحسّنة في إجراء الإحالة الناجحة المُشار إليه في طلبك. يمكنك الاطّلاع على التعليمات اللازمة لذلك في مركز المساعدة.
السابق
إدارة الإحالات الناجحة بلا إنترنت
التالي
إدارة الإحالات الناجحة عبر الاتصال الهاتفي