Çevrimdışı çağrı yüklemek için Google Ads API'yi dönüşümleri Google Ads'e telefon aramaları sağlayan reklamları ve bu telefon aramalarının ne zaman potansiyel müşterileri dönüşüm hunisinin orta kısmına yönelik bir dizi yeni adımdır.
Mobil tıkla ve ara tıklaması, sağlanmışsa dönüşüm olarak yüklenemez Aramaya eklenen Google yönlendirme numarası. Google yönlendirme olmadan Google'ın tıklamanın bir aramaya yol açtığından emin olabilmesi için bir yöntem yok. dönüşüm olarak kabul edilir. Bu şekilde bir tıklama yüklenirse bu tıklama, dönüşüm işlemidir.
Google Ads kullanıcı arayüzü ile eşleme, Yüklemeler dönüşümünü kullanma ile aynıdır. kaynak ve ardından Telefon aramalarından elde edilen dönüşümler'i seçin.
Telefon araması dönüşümü oluşturma
CallConversion
oluştururken aklınızda bulundurmanız gereken birkaç nokta:
Google Ads API'nin v15 sürümünden itibaren
consent
CallConversion
nesne.Etiketin
partial_failure
özelliğiUploadCallConversionsRequest
her zamantrue
olarak ayarlanmalıdır. Kısmi hataları düzeltme kurallarından yararlanarak geçerli ve aynı anda başarısız olan işlemleri takip etmektir.Bir müşteri
TOO_RECENT_CONVERSION_ACTION
veyaTOO_RECENT_CALL
yükleme dönüşümü isteğine yanıt mesajı iletmeniz gerekiyorsa, 6 saat veya 12 saat kontrol edin.İçe aktarılan dönüşüm istatistiklerinin Google Ads hesabınızla oturum açın.
Yinelenen dönüşümler (yani
CallConversion
caller_id
,conversion_date_time
veconversion_action
önceden yüklenmişse)CALL_CONVERSION_ALREADY_EXISTS
hatası döndürülür.- Tek bir istek aynı dönüşüm için birden fazla işlem içeriyorsa
DUPLICATE_CALL_CONVERSION_IN_REQUEST
hatası döndürülür.
- Tek bir istek aynı dönüşüm için birden fazla işlem içeriyorsa
Telefon araması dönüşümü yükleme
Çevrimdışı telefon araması dönüşümlerinizi bir dönüşüm işlemiyle ilişkilendirmek için
şu bilgilere gerek vardır: arayan kimliği (telefon numarası),
dönüşüm tarihi saatini, dönüşüm işlemi kaynağı adını ve isteğe bağlı olarak
dönüşüm değerini ve para birimini
ConversionUploadService
.
Farklı girişlerle ilgili daha fazla bilgi edinmek için Yardım
daha fazla bilgi edinin. Kod
example, farklı girişlerin biçimlerini de açıklar.
Şartlar
Yükleme sırasında karşılanması gereken birkaç koşul vardır:
CallConversion
.
ConversionUploadError.INVALID_CONVERSION_ACTION
hatasını önlemek için
conversion_action
özelliği
Aşağıdaki durumlarda bir ConversionAction
'ye başvurmalıdır:
ConversionActionType
UPLOAD_CALLS
İlgili içeriği oluşturmak için kullanılan
status
/ConversionAction
oda:ENABLED
. Aksi takdirde, işlemNO_CONVERSION_ACTION_FOUND
hatası.ConversionAction
, şunun Google Ads dönüşüm müşterisinde var: Tıklamanın Google Ads hesabı.
Ayrıca
ConversionAction.category
en iyi tanımlayan kategoriyi seçin.
Ayrıca, aşağıdaki koşulların karşılanması gerekir:
Görüşme sırasında dönüşüm izleme Google Ads dönüşüm müşterisi çağrının Google Ads hesabından
customer_id
UploadCallConversionsRequest
Google Ads dönüşümünün müşteri kimliği olmalıdır müşterisi çağrının Google Ads hesabına bağlayabilirsiniz. Aksi takdirde, dönüşüm yüklemesi ileConversionUploadError.INVALID_CUSTOMER_FOR_CALL
hata.conversion_value
, sıfırdan büyük veya sıfırdan büyük olmalıdır.conversion_date_time
için bir saat dilimi belirtilmelidir. Biçim ise olmasıyyyy-mm-dd HH:mm:ss+|-HH:mm
, örneğin:2022-01-01 19:32:45-05:00
(yaz saati uygulaması yok sayılıyor) , Saat dilimi, geçerli herhangi bir değer için olabilir: hesabın saat dilimiyle eşleşmesi gerekmez.
Kod örneği
Java
private void runExample( GoogleAdsClient googleAdsClient, long customerId, String conversionActionId, String callerId, String callStartDateTime, double conversionValue, Long conversionCustomVariableId, String conversionCustomVariableValue, ConsentStatus adUserDataConsent) { // Create a call conversion by specifying currency as USD. CallConversion.Builder conversionBuilder = CallConversion.newBuilder() .setConversionAction(conversionActionId) .setCallerId(callerId) .setCallStartDateTime(callStartDateTime) .setConversionValue(conversionValue) .setCurrencyCode("USD"); if (conversionCustomVariableId != null && conversionCustomVariableValue != null) { conversionBuilder.addCustomVariables( CustomVariable.newBuilder() .setConversionCustomVariable( ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId)) .setValue(conversionCustomVariableValue)); } // Sets the consent information, if provided. if (adUserDataConsent != null) { // Specifies whether user consent was obtained for the data you are uploading. See // https://www.google.com/about/company/user-consent-policy for details. conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent)); } CallConversion conversion = conversionBuilder.build(); // Uploads the call conversion to the API. try (ConversionUploadServiceClient conversionUploadServiceClient = googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) { // Partial failure MUST be enabled for this request. // NOTE: This request contains a single conversion as a demonstration. However, if you have // multiple conversions to upload, it's best to upload multiple conversions per request // instead of sending a separate request per conversion. See the following for per-request // limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service UploadCallConversionsResponse response = conversionUploadServiceClient.uploadCallConversions( UploadCallConversionsRequest.newBuilder() .setCustomerId(String.valueOf(customerId)) .setCustomerId(Long.toString(customerId)) .addConversions(conversion) .setPartialFailure(true) .build()); // Prints any partial failure errors returned. if (response.hasPartialFailureError()) { GoogleAdsFailure googleAdsFailure = ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError()); googleAdsFailure .getErrorsList() .forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage())); throw new RuntimeException( "Partial failure occurred " + response.getPartialFailureError().getMessage()); } // Prints the result if valid. CallConversionResult result = response.getResults(0); System.out.printf( "Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion" + " action with resource name '%'.%n", result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction()); } }
C#
public void Run(GoogleAdsClient client, long customerId, long conversionActionId, string callerId, string callStartTime, string conversionTime, double conversionValue, long? conversionCustomVariableId, string conversionCustomVariableValue, ConsentStatus? adUserDataConsent) { // Get the ConversionUploadService. ConversionUploadServiceClient conversionUploadService = client.GetService(Services.V17.ConversionUploadService); // Create a call conversion by specifying currency as USD. CallConversion callConversion = new CallConversion() { ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId), CallerId = callerId, CallStartDateTime = callStartTime, ConversionDateTime = conversionTime, ConversionValue = conversionValue, CurrencyCode = "USD", }; if (adUserDataConsent != null) { // Specifies whether user consent was obtained for the data you are uploading. See // https://www.google.com/about/company/user-consent-policy // for details. callConversion.Consent = new Consent() { AdUserData = (ConsentStatus)adUserDataConsent }; } if (conversionCustomVariableId != null && !string.IsNullOrEmpty(conversionCustomVariableValue)) { callConversion.CustomVariables.Add(new CustomVariable() { ConversionCustomVariable = ResourceNames.ConversionCustomVariable( customerId, conversionCustomVariableId.Value), Value = conversionCustomVariableValue }); } UploadCallConversionsRequest request = new UploadCallConversionsRequest() { CustomerId = customerId.ToString(), Conversions = { callConversion }, PartialFailure = true }; try { // Issues a request to upload the call conversion. The partialFailure parameter // is set to true, and validateOnly parameter to false as required by this method // call. // NOTE: This request contains a single conversion as a demonstration. However, if // you have multiple conversions to upload, it's best to upload multiple conversions // per request instead of sending a separate request per conversion. See the // following for per-request limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service UploadCallConversionsResponse response = conversionUploadService.UploadCallConversions(request); // Since we set partialFailure = true, we can retrieve error messages (if any) from // the operation response. if (response.PartialFailureError != null) { Console.WriteLine("Call conversion upload failed."); // Retrieves the errors from the partial failure and prints them. List<GoogleAdsError> errors = response.PartialFailure.GetErrorsByOperationIndex(0); foreach (GoogleAdsError error in errors) { Console.WriteLine($"Operation failed with error: {error}."); } } else { // Prints the result. CallConversionResult uploadedCallConversion = response.Results[0]; Console.WriteLine($"Uploaded call conversion that occurred at " + $"'{uploadedCallConversion.CallStartDateTime}' for caller ID " + $"'{uploadedCallConversion.CallerId}' to the conversion action with " + $"resource name '{uploadedCallConversion.ConversionAction}'."); } } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
PHP
public static function runExample( GoogleAdsClient $googleAdsClient, int $customerId, int $conversionActionId, string $callerId, string $callStartDateTime, string $conversionDateTime, float $conversionValue, ?string $conversionCustomVariableId, ?string $conversionCustomVariableValue, ?int $adUserDataConsent ) { // Creates a call conversion by specifying currency as USD. $callConversion = new CallConversion([ 'conversion_action' => ResourceNames::forConversionAction($customerId, $conversionActionId), 'caller_id' => $callerId, 'call_start_date_time' => $callStartDateTime, 'conversion_date_time' => $conversionDateTime, 'conversion_value' => $conversionValue, 'currency_code' => 'USD' ]); if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) { $callConversion->setCustomVariables([new CustomVariable([ 'conversion_custom_variable' => ResourceNames::forConversionCustomVariable( $customerId, $conversionCustomVariableId ), 'value' => $conversionCustomVariableValue ])]); } // Sets the consent information, if provided. if (!empty($adUserDataConsent)) { // Specifies whether user consent was obtained for the data you are uploading. See // https://www.google.com/about/company/user-consent-policy for details. $callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent])); } // Issues a request to upload the call conversion. $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient(); // NOTE: This request contains a single conversion as a demonstration. However, if you have // multiple conversions to upload, it's best to upload multiple conversions per request // instead of sending a separate request per conversion. See the following for per-request // limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service $response = $conversionUploadServiceClient->uploadCallConversions( // Partial failure MUST be enabled for this request. UploadCallConversionsRequest::build($customerId, [$callConversion], true) ); // Prints the status message if any partial failure error is returned. // Note: The details of each partial failure error are not printed here, you can refer to // the example HandlePartialFailure.php to learn more. if ($response->hasPartialFailureError()) { printf( "Partial failures occurred: '%s'.%s", $response->getPartialFailureError()->getMessage(), PHP_EOL ); } else { // Prints the result if exists. /** @var CallConversionResult $uploadedCallConversion */ $uploadedCallConversion = $response->getResults()[0]; printf( "Uploaded call conversion that occurred at '%s' for caller ID '%s' to the " . "conversion action with resource name '%s'.%s", $uploadedCallConversion->getCallStartDateTime(), $uploadedCallConversion->getCallerId(), $uploadedCallConversion->getConversionAction(), PHP_EOL ); } }
Python
def main( client, customer_id, conversion_action_id, caller_id, call_start_date_time, conversion_date_time, conversion_value, conversion_custom_variable_id, conversion_custom_variable_value, ad_user_data_consent, ): """Imports offline call conversion values for calls related to your ads. Args: client: An initialized GoogleAdsClient instance. customer_id: The client customer ID string. conversion_action_id: The ID of the conversion action to upload to. caller_id: The caller ID from which this call was placed. Caller ID is expected to be in E.164 format with preceding '+' sign, e.g. '+18005550100'. call_start_date_time: The date and time at which the call occurred. The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm', e.g. '2021-01-01 12:32:45-08:00'. conversion_date_time: The the date and time of the conversion (should be after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm', e.g. '2021-01-01 12:32:45-08:00'. conversion_value: The conversion value in the desired currency. conversion_custom_variable_id: The ID of the conversion custom variable to associate with the upload. conversion_custom_variable_value: The str value of the conversion custom variable to associate with the upload. ad_user_data_consent: The consent status for ad user data for all members in the job. """ # Get the ConversionUploadService client. conversion_upload_service = client.get_service("ConversionUploadService") # Create a call conversion in USD currency. call_conversion = client.get_type("CallConversion") call_conversion.conversion_action = client.get_service( "ConversionActionService" ).conversion_action_path(customer_id, conversion_action_id) call_conversion.caller_id = caller_id call_conversion.call_start_date_time = call_start_date_time call_conversion.conversion_date_time = conversion_date_time call_conversion.conversion_value = conversion_value call_conversion.currency_code = "USD" if conversion_custom_variable_id and conversion_custom_variable_value: conversion_custom_variable = client.get_type("CustomVariable") conversion_custom_variable.conversion_custom_variable = ( conversion_custom_variable_id ) conversion_custom_variable.value = conversion_custom_variable_value call_conversion.custom_variables.append(conversion_custom_variable) # Specifies whether user consent was obtained for the data you are # uploading. For more details. see: # https://www.google.com/about/company/user-consent-policy if ad_user_data_consent: call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[ ad_user_data_consent ] # Issue a request to upload the call conversion. # Partial failure MUST be enabled for this request. request = client.get_type("UploadCallConversionsRequest") request.customer_id = customer_id request.conversions = [call_conversion] request.partial_failure = True # NOTE: This request only uploads a single conversion, but if you have # multiple conversions to upload, it's most efficient to upload them in a # single request. See the following for per-request limits for reference: # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service upload_call_conversions_response = ( conversion_upload_service.upload_call_conversions(request=request) ) # Print any partial errors returned. if upload_call_conversions_response.partial_failure_error: print( "Partial error occurred: " f"'{upload_call_conversions_response.partial_failure_error.message}'" ) # Print the result if valid. uploaded_call_conversion = upload_call_conversions_response.results[0] if uploaded_call_conversion.call_start_date_time: print( "Uploaded call conversion that occurred at " f"'{uploaded_call_conversion.call_start_date_time}' " f"for caller ID '{uploaded_call_conversion.caller_id}' " "to the conversion action with resource name " f"'{uploaded_call_conversion.conversion_action}'." )
Ruby
def upload_call_conversion( customer_id, conversion_action_id, caller_id, call_start_date_time, conversion_date_time, conversion_value, conversion_custom_variable_id, conversion_custom_variable_value, ad_user_data_consent) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new # Create a call conversion by specifying currency as USD. call_conversion = client.resource.call_conversion do |c| c.conversion_action = client.path.conversion_action( customer_id, conversion_action_id) c.caller_id = caller_id c.call_start_date_time = call_start_date_time c.conversion_date_time = conversion_date_time c.conversion_value = conversion_value c.currency_code = "USD" if conversion_custom_variable_id && conversion_custom_variable_value c.custom_variables << client.resource.custom_variable do |cv| cv.conversion_custom_variable = client.path.conversion_custom_variable( customer_id, conversion_custom_variable_id) cv.value = conversion_custom_variable_value end end unless ad_user_data_consent.nil? c.consent = client.resource.consent do |c| # Specifies whether user consent was obtained for the data you are # uploading. For more details, see: # https://www.google.com/about/company/user-consent-policy c.ad_user_data = ad_user_data_consent end end end # Issues a request to upload the call conversion. response = client.service.conversion_upload.upload_call_conversions( customer_id: customer_id, # NOTE: This request only uploads a single conversion, but if you have # multiple conversions to upload, it's most efficient to upload them in a # single request. See the following for per-request limits for reference: # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service conversions: [call_conversion], partial_failure: true ) # Prints errors if any partial failure error is returned. if response.partial_failure_error failures = client.decode_partial_failure_error(response.partial_failure_error) failures.each do |failure| failure.errors.each do |error| human_readable_error_path = error .location .field_path_elements .map { |location_info| if location_info.index "#{location_info.field_name}[#{location_info.index}]" else "#{location_info.field_name}" end }.join(" > ") errmsg = "error occured while adding operations " \ "#{human_readable_error_path}" \ " with value: #{error.trigger.string_value}" \ " because #{error.message.downcase}" puts errmsg end end else # Print the result if valid. uploaded_call_conversion = response.results.first puts "Uploaded call conversion that occurred at " \ "#{uploaded_call_conversion.call_start_date_time} " \ "for caller ID " \ "#{uploaded_call_conversion.caller_id} " \ "to the conversion action with resource name " \ "#{uploaded_call_conversion.conversion_action}" end end
Perl
sub upload_call_conversion { my ( $api_client, $customer_id, $conversion_action_id, $caller_id, $call_start_date_time, $conversion_date_time, $conversion_value, $conversion_custom_variable_id, $conversion_custom_variable_value, $ad_user_data_consent ) = @_; # Create a call conversion by specifying currency as USD. my $call_conversion = Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CallConversion ->new({ conversionAction => Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action( $customer_id, $conversion_action_id ), callerId => $caller_id, callStartDateTime => $call_start_date_time, conversionDateTime => $conversion_date_time, conversionValue => $conversion_value, currencyCode => "USD" }); if ($conversion_custom_variable_id && $conversion_custom_variable_value) { $call_conversion->{customVariables} = [ Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable ->new({ conversionCustomVariable => Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable( $customer_id, $conversion_custom_variable_id ), value => $conversion_custom_variable_value })]; } # Set the consent information, if provided. if ($ad_user_data_consent) { # Specify whether user consent was obtained for the data you are uploading. # See https://www.google.com/about/company/user-consent-policy for details. $call_conversion->{consent} = Google::Ads::GoogleAds::V17::Common::Consent->new({ adUserData => $ad_user_data_consent }); } # Issue a request to upload the call conversion. # NOTE: This request contains a single conversion as a demonstration. # However, if you have multiple conversions to upload, it's best to # upload multiple conversions per request instead of sending a separate # request per conversion. See the following for per-request limits: # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service my $upload_call_conversions_response = $api_client->ConversionUploadService()->upload_call_conversions({ customerId => $customer_id, conversions => [$call_conversion], partialFailure => "true" }); # Print any partial errors returned. if ($upload_call_conversions_response->{partialFailureError}) { printf "Partial error encountered: '%s'.\n", $upload_call_conversions_response->{partialFailureError}{message}; } # Print the result if valid. my $uploaded_call_conversion = $upload_call_conversions_response->{results}[0]; if (%$uploaded_call_conversion) { printf "Uploaded call conversion that occurred at '%s' " . "for caller ID '%s' to the conversion action with resource name '%s'.\n", $uploaded_call_conversion->{callStartDateTime}, $uploaded_call_conversion->{callerId}, $uploaded_call_conversion->{conversionAction}; } return 1; }