انضمّوا إلينا في بث مباشر على Discord على خادم Google Advertising and Measurement Community وعلى YouTube في 15 أكتوبر الساعة 10:00 صباحًا بالتوقيت الشرقي. سنتناول الميزات الجديدة التي تمت إضافتها في الإصدار 26 من Google Ads API.

تستخدم Google تكنولوجيا الذكاء الاصطناعي لترجمة المحتوى إلى لغتك المفضّلة، وقد تتضمّن بعض الأخطاء.

ميزانيات الحساب

تتحكّم ميزانيات الحساب في المبلغ الذي يمكن أن ينفقه الحساب خلال فترة زمنية معيّنة من خلال تحديد خصائص الميزانية، مثل حدّ الإنفاق ووقت البدء ووقت الانتهاء. ويجب أن تشير إلى أحد إعدادات الفوترة في الحساب، لتحديد حساب الدفعات الذي سيتم تحصيل الرسوم منه. يمكنك إنشاء وتعديل وإزالة الـ AccountBudget في Google Ads API عن طريق إرسال كائنات الـ AccountBudgetProposal.

AccountBudget تمثّل كائنات النتيجة النهائية لتطبيق الاقتراحات. بعد الموافقة على اقتراح، ستؤدي التغييرات التي تم إجراؤها (مع مراعاة أي تعديلات) إلى إنشاء ميزانية حساب جديدة أو تعديل ميزانية حالية. ويعتمد ذلك على proposal_type المحدّد في الطلب.

`AccountBudgetProposalType`	الوصف
`CREATE`	إنشاء ميزانية حساب جديدة يجب الموافقة عليها قبل استخدامها
`UPDATE`	تعديل ميزانية حساب حالية
`END`	ضبط وقت انتهاء ميزانية الحساب على الوقت الحالي
`REMOVE`	إزالة ميزانية الحساب قبل وقت بدئها

توضّح الأقسام التالية سلوك كل نوع من أنواع الاقتراحات.

إنشاء اقتراح ميزانية حساب

يتيح لك إنشاء ميزانية حساب جديدة التحكّم في سلوك إنفاق العميل. استخدِم AccountBudgetProposalService لإنشاء جديد AccountBudgetProposal. عليك ضبط proposal_type على CREATE لتحديد أنّه يجب إنشاء ميزانية جديدة. يُرجى الرجوع إلى قسم الإدارة في هذا الدليل للاطّلاع على العمليات الأخرى.

تذكَّر استخدام إعداد فوترة مع حساب دفعات لديك إذن الكتابة إليه. يُرجى الرجوع إلى دليل إعدادات الفوترة للحصول على التفاصيل.

يوضّح المثال التالي كيفية إنشاء اقتراح ميزانية جديد.

جافا

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}AddAccountBudgetProposal.java

#C

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V25.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}AddAccountBudgetProposal.cs

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}AddAccountBudgetProposal.php

Python

def main(client: GoogleAdsClient, customer_id: str, billing_setup_id: str):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )add_account_budget_proposal.py

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
endadd_account_budget_proposal.rb

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}add_account_budget_proposal.pl

curl

ملاحظة: لا يتم تقديم عينة تعليمات برمجية REST مباشرة لهذه الخطوة هنا، ولكن يمكنك تحقيق ذلك باستخدام طلب REST يدوي.

يُرجى الرجوع إلى مستندات واجهة Google Ads API REST والصفحات المرجعية الخاصة بالطريقة. عليك إنشاء حمولة JSON استنادًا إلى تعريفات بروتوكول المخزن المؤقت.

Key Resources:

استخدام REST
بنية واجهة REST
عمليات الربط بين حقول JSON
يُرجى الرجوع إلى المرجع الخاص بواجهة برمجة تطبيقات REST للاطّلاع على الخدمة والطريقة المحدّدتَين.

في طلبات اقتراحات ميزانيات الحسابات، proposed_start_date_time و proposed_end_date_time يكونان دائمًا في المنطقة الزمنية لحساب العميل، ولا يمكنك تحديد منطقة زمنية. يتم قياس حدّ الإنفاق المقترَح دائمًا بعملة الحساب، ويتم تحديده باستخدام وحدات "ميكرو"، لذا فإنّ 1.00 دولار أمريكي = 1,000,000 ميكرو.

يمكنك اختياريًا تضمين رقم طلب شراء سيظهر بجانب هذه الرسوم في الفاتورة. ولن يؤثر ذلك في عرض الميزانية.

إزالة اقتراح ميزانية حساب معلّق

يمكنك إزالة اقتراح ميزانية معلّق بالكامل عن طريق إرسال طلب AccountBudgetProposalOperation.remove مع اسم مورد اقتراح ميزانية الحساب. ومع ذلك، يُرجى العِلم أنّه يتم عادةً تطبيق اقتراحات الميزانيات في غضون دقائق.

Java

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
account_budget_proposal_operation.remove = (
    account_budget_proposal_service.account_budget_proposal_path(
        customer_id, account_budget_proposal_id
    )
)

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V26::Utils::ResourceNames::account_budget_proposal(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

إذا ارتكبت خطأً في الاقتراح الأصلي، يمكنك إعادة إرساله كعملية UPDATE. يُرجى الرجوع إلى مقالة تعديل ميزانية حساب حالية.

استرداد ميزانيات الحسابات الحالية

يستردّ طلب البحث التالي بلغة طلبات بحث إعلانات Google (GAQL) جميع ميزانيات الحسابات الحالية في حساب معيّن:

SELECT
  account_budget.resource_name,
  account_budget.id,
  account_budget.name,
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

تحتوي الحقول التي تتضمّن وقت بدء ميزانية الحساب ووقت انتهائها والحدّ الأقصى للإنفاق على أشكال متعدّدة مع بادئات مثل proposed وapproved تتيح مقارنة القيم التي تم اقتراحها في البداية بالقيم التي تمت الموافقة عليها. يحتوي حدّ الإنفاق على حقول إضافية مع البادئة adjusted للإشارة إلى حدّ الإنفاق الحالي الساري بعد تطبيق أي تعديلات على المبلغ الذي تمت الموافقة عليه.

يمكن تعديل الحدّ الأقصى للإنفاق الذي تمت الموافقة عليه لميزانية الحساب بمرور الوقت ليعكس أرصدة مختلفة لعوامل مثل العرض الزائد للميزانية ونشاط النقرات غير الصالح وقسائم العروض الترويجية. يمكنك العثور على مزيد من المعلومات عن ميزانيات الحسابات و أرصدة الحسابات والتعديلات في مركز مساعدة "إعلانات Google".

ستملأ أيضًا أي ميزانيات حسابات جديدة معلّقة في انتظار الموافقة، بالإضافة إلى أي ميزانيات حسابات حالية تتضمّن تعديلات معلّقة، الرسالة الفرعية pending_proposal، التي يمكن اختيار حقولها الفرعية في طلب بحث GAQL (مثل account_budget_proposal، الذي يتم طلبه كـ account_budget.pending_proposal.account_budget_proposal، لاسم مورد كائن AccountBudgetProposal المرتبط).

إدارة ميزانيات الحسابات الحالية

بعد إنشاء ميزانية حساب لعميل، يمكنك استخدام الـ AccountBudgetProposalService لإدارة مَعلمات الميزانية. إنّ عمليات الإدارة الأكثر شيوعًا هي تعديل الحقلَين proposed_spending_limit_micros وproposed_end_date_time. للاطّلاع على قائمة كاملة بالحقول القابلة للتعديل، يُرجى الرجوع إلى AccountBudgetProposal المستندات المرجعية.

لديك خيار تعديل ميزانية حساب حالية أو إنشاء ميزانية جديدة بالكامل، ويتم عرض كلتيهما هنا.

تعديل ميزانية حساب حالية

يمكنك تعديل حقول ميزانية الحساب الحالية عن طريق إرسال AccountBudgetProposal كائنات مع AccountBudgetProposalType ضبطها على UPDATE. يُرجى العِلم أنّه يجب أيضًا الإشارة إلى الحقول التي يتم تعديلها في وسيطة update_mask للعملية.

يوضّح المقتطف التالي كيفية تعديل الحدّ الأقصى للإنفاق المقترَح لميزانية حساب حالية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit_micros")).build())
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit_micros" }
  }
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.UPDATE
proposal.account_budget = account_budget.resource_name
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal._pb)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).

Ruby

proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

ربط ميزانيات الحسابات

كبديل لتعديل الميزانية الحالية، تتيح لك "إعلانات Google" ربط ميزانيات حسابات متعدّدة لعرضها على التوالي. في المثال التالي، يكون لدى العميل حدود إنفاق مختلفة كل شهر.

مخطّط يوضّح سلسلة من ميزانيات الحسابات مع حدود إنفاق مختلفة كل شهر — مثال على ربط ميزانيات الحسابات

يمكن تحقيق ذلك عن طريق إنشاء ثلاثة AccountBudgetProposal كائنات وإرسال كل AccountBudgetProposalOperation إلى AccountBudgetProposalService في طلب MutateAccountBudgetProposal منفصل (لأنّ MutateAccountBudgetProposalRequest يقبل operation واحدًا لكل طلب).

يوضّح المقتطف التالي كيفية إنشاء سلسلة من هذا النوع باستخدام إعداد فوترة حالي.

Java

AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2027-05-01 00:00:00")
  .setProposedEndDateTime("2027-06-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationMay = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalMay)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2027-06-01 00:00:00")
  .setProposedEndDateTime("2027-07-01 00:00:00")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJune = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJune)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2027-07-01 00:00:00")
  .setProposedEndDateTime("2027-08-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJuly = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJuly)
  .build();

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2027-05-01 00:00:00",
  ProposedEndDateTime = "2027-06-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationMay = new AccountBudgetProposalOperation()
{
  Create = proposalMay
};

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2027-06-01 00:00:00",
  ProposedEndDateTime = "2027-07-01 00:00:00",
  ProposedSpendingLimitMicros = 5_000_000_000
};

AccountBudgetProposalOperation operationJune = new AccountBudgetProposalOperation()
{
  Create = proposalJune
};

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2027-07-01 00:00:00",
  ProposedEndDateTime = "2027-08-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationJuly = new AccountBudgetProposalOperation()
{
  Create = proposalJuly
};

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

PHP

$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2027-05-01 00:00:00',
  'proposed_end_date_time' => '2027-06-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationMay = new AccountBudgetProposalOperation();
$operationMay->setCreate($proposalMay);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2027-06-01 00:00:00',
  'proposed_end_date_time' => '2027-07-01 00:00:00',
  'proposed_spending_limit_micros' => 5000000000
]);
$operationJune = new AccountBudgetProposalOperation();
$operationJune->setCreate($proposalJune);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2027-07-01 00:00:00',
  'proposed_end_date_time' => '2027-08-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationJuly = new AccountBudgetProposalOperation();
$operationJuly->setCreate($proposalJuly);

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Python

billing_setup_service = client.get_service('BillingSetupService')

may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_may = may_account_budget_proposal_operation.create
proposal_may.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_may.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_may.proposed_name = 'May budget'
proposal_may.proposed_start_date_time = '2027-05-01 00:00:00'
proposal_may.proposed_end_date_time = '2027-06-01 00:00:00'
proposal_may.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_june = june_account_budget_proposal_operation.create
proposal_june.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_june.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_june.proposed_name = 'June budget'
proposal_june.proposed_start_date_time = '2027-06-01 00:00:00'
proposal_june.proposed_end_date_time = '2027-07-01 00:00:00'
proposal_june.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_july = july_account_budget_proposal_operation.create
proposal_july.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_july.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_july.proposed_name = 'July budget'
proposal_july.proposed_start_date_time = '2027-07-01 00:00:00'
proposal_july.proposed_end_date_time = '2027-08-01 00:00:00'
proposal_july.proposed_spending_limit_micros = 1000000000

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Ruby

operation_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2027-05-01 00:00:00'
  proposal.proposed_end_date_time = '2027-06-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

operation_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2027-06-01 00:00:00'
  proposal.proposed_end_date_time = '2027-07-01 00:00:00'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

operation_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2027-07-01 00:00:00'
  proposal.proposed_end_date_time = '2027-08-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Perl

my $may_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2027-05-01 00:00:00",
    proposedEndDateTime => "2027-06-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $may_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $may_proposal});

my $june_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2027-06-01 00:00:00",
    proposedEndDateTime => "2027-07-01 00:00:00",
    proposedSpendingLimitMicros => 5000000000
  });
my $june_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $june_proposal});

my $july_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V26::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2027-07-01 00:00:00",
    proposedEndDateTime => "2027-08-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $july_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $july_proposal});

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

يُرجى العِلم باستخدام AccountBudgetProposalType.CREATE في كل اقتراح. سيؤدي ذلك إلى إنشاء ثلاث ميزانيات مختلفة، بدلاً من تعديل الميزانية نفسها ثلاث مرات.

إنهاء ميزانيات الحسابات

يمكن إنهاء ميزانيات الحسابات أثناء نشاطها، وإزالتها بالكامل قبل بدئها أو أثناء انتظار الموافقة عليها.

إنهاء ميزانية الحساب النشطة

لا يمكن إزالة ميزانية الحساب النشطة. ومع ذلك، يمكنك ضبط وقت الانتهاء على الوقت الحالي. إنّ أبسط طريقة لتحقيق ذلك هي إرسال اقتراح باستخدام AccountBudgetProposalType.END.

يوضّح المقتطف التالي كيفية إنهاء ميزانية حساب حالية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :END
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

يعادل ذلك تعديل ميزانية حساب عن طريق ضبط وقت تاريخ الانتهاء على TimeType.NOW.

إزالة ميزانية حساب تمت الموافقة عليها قبل وقت بدئها

إذا اقترحت ميزانية حساب لبدئها في المستقبل، يمكنك إزالتها بالكامل قبل وقت البدء عن طريق إرسال AccountBudgetProposalType.REMOVE نوع اقتراح.

يوضّح المقتطف التالي إزالة ميزانية حساب حالية مستقبلية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :REMOVE
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V26::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V26::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

إعداد الفوترة

فاتورة

ميزانيات الحساب تنظيم صفحاتك في مجموعات يمكنك حفظ المحتوى وتصنيفه حسب إعداداتك المفضّلة.

إنشاء اقتراح ميزانية حساب

جافا

#C

PHP

Python

Ruby

Perl

curl

إزالة اقتراح ميزانية حساب معلّق

استرداد ميزانيات الحسابات الحالية

إدارة ميزانيات الحسابات الحالية

تعديل ميزانية حساب حالية

ربط ميزانيات الحسابات

إنهاء ميزانيات الحسابات

إنهاء ميزانية الحساب النشطة

إزالة ميزانية حساب تمت الموافقة عليها قبل وقت بدئها

ميزانيات الحساب