Tworzenie wykluczeń danych

Wykluczenia danych to zaawansowane narzędzie, które może służyć do informowania inteligentnego określania stawek, aby ignorowało wszystkie dane z dni, w których występowały problemy ze śledzeniem konwersji na koncie. Więcej informacji o działaniu wykluczeń danych znajdziesz na stronie pomocy dotyczącej wykluczeń danych.

Wykluczenia danych możesz tworzyć, aktualizować i usuwać automatycznie za pomocą zasobu BiddingDataExclusion i metody BiddingDataExclusionService.MutateBiddingDataExclusions z użyciem BiddingDataExclusionOperation (create, update lub remove; pamiętaj, że BiddingDataExclusion.status jest tylko do odczytu/OUTPUT_ONLY). Nie możesz utworzyć elementu BiddingDataExclusion na koncie menedżera. Musisz go utworzyć na koncie klienta z zakresem CAMPAIGN lub CHANNEL.

Zakres

BiddingDataExclusion ma wymagany parametr scope, który może mieć te wartości. Dodatkowe opcje konfiguracji dotyczące zakresu są ustawiane w zależności od używanego zakresu.

  • CAMPAIGN: wykluczenie jest stosowane w określonych kampaniach. W polu campaigns ustaw listę nazw zasobów kampanii, do których ma być stosowane to wykluczenie.
  • CHANNEL: wykluczenie jest stosowane w kampaniach należących do określonych typów kanałów. Ustaw pole advertising_channel_types na listę wartości AdvertisingChannelType, do których będzie stosowane to wykluczenie.

Urządzenia

Oprócz zakresu wykluczenia danych można skonfigurować za pomocą opcjonalnej listy typów urządzeń, do których wykluczenie będzie miało zastosowanie. Jeśli ustawisz parametr devices, wykluczone zostaną tylko dane o konwersjach z określonych typów urządzeń. Jeśli nie podasz tej wartości, wykluczone zostaną dane o konwersjach ze wszystkich typów urządzeń.

Daty i godziny

Oprócz zakresu i opcjonalnych urządzeń każde wykluczenie danych musi mieć datę i godzinę rozpoczęcia oraz zakończenia w formacie yyyy-MM-dd HH:mm:ss. Wykluczenie danych działa wstecz i powinno być używane w przypadku zdarzeń, które mają start_date_time w przeszłości i end_date_time w przeszłości lub w przyszłości. Godziny są podane według strefy czasowej konta.

Limity

Podczas pracy z zasobami BiddingDataExclusion pamiętaj o tych limitach:

  • Pojedynczy element BiddingDataExclusion może mieć zastosowanie do maksymalnie 2000 kampanii,gdy zakres jest ustawiony na CAMPAIGN.
  • Każde konto klienta, w tym konta menedżera i konta testowe, może mieć w danym momencie maksymalnie 500 aktywnych wykluczeń danych na potrzeby ustalania stawek. Przekroczenie tego limitu spowoduje błąd RESOURCE_LIMIT.

Przykład

Poniższy przykład pokazuje, jak utworzyć wykluczenie danych o zakresie CHANNEL. Sekcje zmienione w komentarze pokazują, jak określić kampanie, jeśli zamiast tego ustawisz zakres CAMPAIGN:

Java

BiddingDataExclusion DataExclusion =
    BiddingDataExclusion.newBuilder()
        // A unique name is required for every data exclusion.
        .setName("Data exclusion #" + getPrintableDateTime())
        // The CHANNEL scope applies the data exclusion to all campaigns of specific
        // advertising channel types. In this example, the exclusion will only apply to
        // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
        // campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        .build();

BiddingDataExclusionOperation operation =
    BiddingDataExclusionOperation.newBuilder().setCreate(DataExclusion).build();

MutateBiddingDataExclusionsResponse response =
    DataExclusionServiceClient.mutateBiddingDataExclusions(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added data exclusion with resource name: %s%n",
    response.getResults(0).getResourceName());
      

C#

BiddingDataExclusion dataExclusion = new BiddingDataExclusion()
{
    // A unique name is required for every data exclusion.
    Name = "Data exclusion #" + ExampleUtilities.GetRandomString(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    Scope = SeasonalityEventScope.Channel,
    AdvertisingChannelTypes = { AdvertisingChannelType.Search },
    // The date range should be less than 14 days.
    StartDateTime = startDateTime,
    EndDateTime = endDateTime,
};
BiddingDataExclusionOperation operation = new BiddingDataExclusionOperation()
{
    Create = dataExclusion
};

try
{
    MutateBiddingDataExclusionsResponse response =
        biddingDataExclusionService.MutateBiddingDataExclusions(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added data exclusion with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
      

PHP

// Creates a bidding data exclusion.
$dataExclusion = new BiddingDataExclusion(
    [
    // A unique name is required for every data exclusion.
    'name' => 'Data exclusion #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime
    ]
);

// Creates a bidding data exclusion operation.
$biddingDataExclusionOperation = new BiddingDataExclusionOperation();
$biddingDataExclusionOperation->setCreate($dataExclusion);

// Submits the bidding data exclusion operation to add the bidding data exclusion.
$biddingDataExclusionServiceClient =
    $googleAdsClient->getBiddingDataExclusionServiceClient();
$response = $biddingDataExclusionServiceClient->mutateBiddingDataExclusions(
    MutateBiddingDataExclusionsRequest::build($customerId, [$biddingDataExclusionOperation])
);

printf(
    "Added bidding data exclusion with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
      

Python

bidding_data_exclusion_service: BiddingDataExclusionServiceClient = (
    client.get_service("BiddingDataExclusionService")
)
operation: BiddingDataExclusionOperation = client.get_type(
    "BiddingDataExclusionOperation"
)
bidding_data_exclusion: BiddingDataExclusion = operation.create
# A unique name is required for every data exclusion
bidding_data_exclusion.name = f"Data exclusion #{uuid4()}"
# The CHANNEL scope applies the data exclusion to all campaigns of specific
# advertising channel types. In this example, the exclusion will only
# apply to Search campaigns. Use the CAMPAIGN scope to instead limit the
# scope to specific campaigns.
bidding_data_exclusion.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_data_exclusion.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_data_exclusion.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_data_exclusion.start_date_time = start_date_time
bidding_data_exclusion.end_date_time = end_date_time

response: MutateBiddingDataExclusionsResponse = (
    bidding_data_exclusion_service.mutate_bidding_data_exclusions(
        customer_id=customer_id, operations=[operation]
    )
)

resource_name: str = response.results[0].resource_name

print(f"Added data exclusion with resource name: '{resource_name}'")
      

Ruby

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_data_exclusion do |bda|
  # A unique name is required for every data excluseion.
  bda.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the data exclusion to all campaigns of specific
  # advertising channel types. In this example, the conversion_rate_modifier
  # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
  # limit the scope to specific campaigns.
  bda.scope = :CHANNEL
  bda.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bda.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bda.start_date_time = start_date_time
  bda.end_date_time = end_date_time
end

response = client.service.bidding_data_exclusion.mutate_bidding_data_exclusions(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added data exclusion with resource name #{response.results.first.resource_name}."
      

Perl

my $data_exclusion =
  Google::Ads::GoogleAds::V26::Resources::BiddingDataExclusion->new({
    # A unique name is required for every data exclusion.
    name => "Data exclusion #" . uniqid(),
    # The CHANNEL scope applies the data exclusion to all campaigns of specific
    # advertising channel types. In this example, the exclusion will only apply
    # to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    # specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time
  });

my $operation =
  Google::Ads::GoogleAds::V26::Services::BiddingDataExclusionService::BiddingDataExclusionOperation
  ->new({
    create => $data_exclusion
  });

my $response = $api_client->BiddingDataExclusionService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added data exclusion with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
      

curl