Hướng dẫn dành cho nhà phát triển Vị trí tức thì dành cho Android

Tìm hiểu cách sử dụng API Vị trí tức thì trong ứng dụng của chính bạn.

Điều kiện tiên quyết

Hãy đảm bảo rằng bạn hiểu các khái niệm cơ bản về AR và cách định cấu hình phiên ARCore trước khi tiếp tục.

Định cấu hình phiên mới bằng tính năng Vị trí tức thì

Trong phiên ARCore mới, hãy bật Chế độ vị trí tức thì.

Java

// Create the ARCore session.
public void createSession() {
  session = new Session(applicationContext);
  Config config = new Config(session);
  // Set the Instant Placement mode.
  config.setInstantPlacementMode(InstantPlacementMode.LOCAL_Y_UP);
  session.configure(config);
}

Kotlin

// Create the ARCore session.
fun createSession() {
  session = Session(applicationContext);
  val config = Config(session)
  // Set the Instant Placement mode.
  config.instantPlacementMode = Config.InstantPlacementMode.LOCAL_Y_UP
  session.configure(config)
}

Đặt đối tượng

Sử dụng Frame.hitTestInstantPlacement() để tạo một điểm Đặt quảng cáo tức thì có thể theo dõi được dựa trên vị trí nhấn trên màn hình. Truy xuất tư thế hiện tại bằng phương thức getPose().

Java

private placementIsDone = false;

public void onDrawFrame(GL10 gl) {
  Frame frame = session.update();

  // Place an object on tap.
  if (!placementIsDone && didUserTap()) {
    // Use estimated distance from the user's device to the real world, based
    // on expected user interaction and behavior.
    float approximateDistanceMeters = 2.0f;
    // Performs a ray cast given a screen tap position.
    List<HitResult> results =
      frame.hitTestInstantPlacement(tapX, tapY, approximateDistanceMeters);
    if (!results.isEmpty()) {
      InstantPlacementPoint point = (InstantPlacementPoint) results.get(0).getTrackable();
      // Create an Anchor from the point's pose.
      Anchor anchor = point.createAnchor(point.getPose());
      placementIsDone = true;
      disableInstantPlacement();
    }
  }
}

Kotlin

var placementIsDone = false;

fun onDrawFrame(gl: GL10) {
  val frame = session.update();

  // Place an object on tap.
  if (!placementIsDone && didUserTap()) {
    // Use estimated distance from the user's device to the real world, based
    // on expected user interaction and behavior.
    val approximateDistanceMeters = 2.0f;
    // Performs a ray cast given a screen tap position.
    val results = frame.hitTestInstantPlacement(tapX, tapY, approximateDistanceMeters)
    if (results.isNotEmpty()) {
      val point = results[0].trackable as InstantPlacementPoint
      // Create an Anchor from the point's pose.
      val anchor = point.createAnchor(point.pose)
      placementIsDone = true
      disableInstantPlacement()
    }
  }
}

Hỗ trợ Vị trí tức thì theo dõi không gian màn hình với khoảng cách gần đúng, tự động chuyển sang theo dõi đầy đủ khi Điểm Vị trí tức thì được gắn liền với thế giới thực. Truy xuất tư thế hiện tại bằng getPose(). Lấy phương thức theo dõi hiện tại bằng getTrackingMethod().

Mặc dù ARCore có thể thực hiện các thử nghiệm truy cập Vị trí tức thì trên các nền tảng của bất kỳ hướng, kết quả đánh sẽ luôn trả về tư thế với +Y lên, ngược với hướng trọng lực. Trên giao diện ngang, các thử nghiệm nhấn cho kết quả chính xác vị trí nhanh hơn nhiều.

Chuyển đổi phương pháp theo dõi một cách suôn sẻ

Khi độ sâu thực sự có sẵn, ARCore sẽ thay đổi phương pháp theo dõi của InstantPlacementPoint từ SCREENSPACE_WITH_APPROXIMATE_DISTANCE đến FULL_TRACKING. Tư thế của điểm cũng sẽ thay đổi để phản ánh chiều sâu thực sự. Điều này có thể khiến vật thể đột ngột tăng lên hoặc co lại. Để tránh sự thay đổi đột ngột này, hãy thêm một trình bao bọc InstantPlacementPoint.

Java

// Wrapper class to track state to reduce sudden visual changes in object size
class WrappedInstantPlacement {
  public InstantPlacementPoint point;
  public InstantPlacementPoint.TrackingMethod previousTrackingMethod;
  public float previousDistanceToCamera;
  public float scaleFactor = 1.0f;

  public WrappedInstantPlacement(
      InstantPlacementPoint point,
      InstantPlacementPoint.TrackingMethod previousTrackingMethod,
      float previousDistanceToCamera) {
    this.point = point;
    this.previousTrackingMethod = previousTrackingMethod;
    this.previousDistanceToCamera = previousDistanceToCamera;
  }
}

Kotlin

// Wrapper class to track state to reduce sudden visual changes in object size
class WrappedInstantPlacement(
  var point: InstantPlacementPoint,
  var previousTrackingMethod: InstantPlacementPoint.TrackingMethod,
  var previousDistanceToCamera: Float,
  var scaleFactor: Float = 1.0f
)

Sau đó, hãy thêm nội dung sau vào hoạt động của bạn.

Java

List<WrappedInstantPlacement> wrappedPoints = new ArrayList<>();

public void onDrawFrame(GL10 gl) {
  Frame frame = session.update();
  Camera camera = frame.getCamera();

  // Place an object on tap.
  if (didUserTap()) {
    // Instant Placement should only be applied if no results are available through hitTest.
    List<HitResult> results = frame.hitTest(tapX, tapY);
    if (results.isEmpty()) {
      // Use the estimated distance from the user's device to the closest
      // available surface, based on expected user interaction and behavior.
      float approximateDistanceMeters = 2.0f;

      // Returns a single result if the hit test was successful.
      results =
          frame.hitTestInstantPlacement(tapX, tapY, approximateDistanceMeters);
      if (!results.isEmpty()) {
        // Instant placement was successful.
        InstantPlacementPoint point = (InstantPlacementPoint) results.get(0).getTrackable();
        wrappedPoints.add(new WrappedInstantPlacement(point, point.getTrackingMethod(),
          distance(camera.getPose(), point.getPose())));
      }
    } else {
      // results contain valid hit tests which can be used directly, so instant placement is not required.
    }
  }

  for (WrappedInstantPlacement wrappedPoint : wrappedPoints) {
    InstantPlacementPoint point = wrappedPoint.point;
    if (point.getTrackingState() == TrackingState.STOPPED) {
      wrappedPoints.remove(wrappedPoint);
      continue;
    }
    if (point.getTrackingState() == TrackingState.PAUSED) {
      continue;
    }

    if (point.getTrackingMethod() == TrackingMethod.SCREENSPACE_WITH_APPROXIMATE_DISTANCE) {
       // Continue to use the estimated depth and pose. Record the distance to
       // the camera for use in the next frame if the transition to full
       // tracking happens.
       wrappedPoint.previousDistanceToCamera = distance(point.getPose(), camera.getPose());
    }
    else if (point.getTrackingMethod() == TrackingMethod.FULL_TRACKING) {
      if (wrappedPoint.previousTrackingMethod == TrackingMethod.SCREENSPACE_WITH_APPROXIMATE_DISTANCE) {
        // Change from the estimated pose to the accurate pose. Adjust the
        // object scale to counteract the apparent change due to pose jump.
        wrappedPoint.scaleFactor = distance(point.getPose(), camera.getPose()) /
            wrappedPoint.previousDistanceToCamera;
        // Apply the scale factor to the model.
        // ...
        wrappedPoint.previousTrackingMethod = TrackingMethod.FULL_TRACKING;
      }
    }
  }
}

float distance(Pose p, Pose q) {
  return Math.sqrt(Math.pow(p.tx() - q.tx(), 2) + Math.pow(p.ty() - q.ty(), 2) + Math.pow(p.tz() - q.tz(), 2));
}

Kotlin

var wrappedPoints = mutableListOf<WrappedInstantPlacement>()

fun onDrawFrame(gl: GL10?) {
  val frame = session.update()
  val camera = frame.camera

  // Place an object on tap.
  if (didUserTap()) {
    // Instant Placement should only be applied if no results are available through hitTest.
    var results = frame.hitTest(tapX, tapY);
    if (results.isEmpty()) {
      // Use the estimated distance from the user's device to the closest
      // available surface, based on expected user interaction and behavior.
      val approximateDistanceMeters = 2.0f;

      // Returns a single result if the hit test was successful.
      results = frame.hitTestInstantPlacement(tapX, tapY, approximateDistanceMeters);
      if (results.isNotEmpty()) {
        // Instant placement was successful.
        val point = results[0].trackable as InstantPlacementPoint
        val wrapped = WrappedInstantPlacement(point, point.trackingMethod, point.pose.distance(camera.pose))
        wrappedPoints.add(wrapped)
      }
    } else {
      // Results contain valid hit tests which can be used directly, so Instant Placement 
      // is not required.
    }
  }

  loop@ for (wrappedPoint in wrappedPoints) {
    val point = wrappedPoint.point
    when {
      point.trackingState == TrackingState.STOPPED -> {
        wrappedPoints.remove(wrappedPoint)
        continue@loop
      }
      point.trackingState == TrackingState.PAUSED -> continue@loop
      point.trackingMethod == TrackingMethod.SCREENSPACE_WITH_APPROXIMATE_DISTANCE -> {
        // Continue to use the estimated depth and pose. Record the distance to
        // the camera for use in the next frame if the transition to full
        // tracking happens.
        wrappedPoint.previousDistanceToCamera = point.pose.distance(camera.pose)
      }
      wrappedPoint.previousTrackingMethod == TrackingMethod.SCREENSPACE_WITH_APPROXIMATE_DISTANCE &&
      point.trackingMethod == TrackingMethod.FULL_TRACKING -> {
        // Change from the estimated pose to the accurate pose. Adjust the
        // object scale to counteract the apparent change due to pose jump.
        wrappedPoint.scaleFactor =
          point.pose.distance(camera.pose) / wrappedPoint.previousDistanceToCamera
        // Apply the scale factor to the model.
        // ...
        wrappedPoint.previousTrackingMethod = TrackingMethod.FULL_TRACKING
      }
    }
  }
}

fun Pose.distance(other: Pose) = sqrt(
  (tx() - other.tx()).pow(2.0f) + (ty() - other.ty()).pow(2.0f) + (tz() - other.tz()).pow(2.0f)
)

Tăng hiệu quả sau khi đặt đối tượng

Tắt Vị trí tức thì khi đối tượng được đặt đúng để lưu chu kỳ của CPU và sức mạnh.

Java

void disableInstantPlacement() {
  Config config = new Config(session);
  config.setInstantPlacementMode(Config.InstantPlacementMode.DISABLED);
  session.configure(config);
}

Kotlin

fun disableInstantPlacement() {
  val config = Config(session)
  // Set the Instant Placement mode.
  config.instantPlacementMode = Config.InstantPlacementMode.DISABLED
  session.configure(config)
}