मैसेज भेजें

किसी व्यक्ति का मैसेज मिलने के बाद, उसके साथ बातचीत जारी रखने के लिए उसे जवाब भेजा जा सकता है. उपयोगकर्ता के आखिरी मैसेज के 30 दिन बाद तक, उसे मैसेज भेजे जा सकते हैं.

एजेंट, मैसेज भेजकर और उन्हें पाकर लोगों से बातचीत करते हैं. लोगों को मैसेज भेजने के लिए, आपका एजेंट Business Messages को मैसेज के अनुरोध भेजता है.

मैसेज भेजने के लिए, Business Messages API को एचटीटीपी पोस्ट अनुरोध भेजा जाता है. इसमें ये शामिल हैं:

  • यूनीक मैसेज आईडी
  • बातचीत का आईडी
  • मैसेज का कॉन्टेंट

जब Business Messages API, उपयोगकर्ता को आपका मैसेज भेजता है, तो यह 200 OK दिखाता है. अगर आपके मैसेज में ज़रूरी वैल्यू मौजूद नहीं हैं, तो एपीआई 400 गड़बड़ी दिखाता है. अगर मैसेज में अमान्य क्रेडेंशियल का इस्तेमाल किया गया है, तो एपीआई 401 गड़बड़ी दिखाता है.

मैसेज डिलीवरी में आने वाली समस्याओं को डीबग करने के लिए, Business Communications डेवलपर कंसोल के लॉग पेज का इस्तेमाल करें.

फ़ॉलबैक की रणनीति

अगर उपयोगकर्ता के डिवाइस पर वह मैसेज काम नहीं करता जिसे भेजने की कोशिश की जा रही है, जैसे कि अगर किसी उपयोगकर्ता पर सुझाए गए जवाब की सुविधा काम नहीं करती, तो एपीआई 400 (FAILED PRECONDITION) गड़बड़ी दिखाता है. हालांकि, भेजे जाने वाले हर मैसेज के लिए fallback टेक्स्ट तय करके, इस तरह के मैसेज पर काम किया जा सकता है. fallback टेक्स्ट बताने पर, एपीआई 200 OK रिस्पॉन्स देता है, भले ही उपयोगकर्ता के डिवाइस पर मैसेज टाइप काम न करता हो.

अगर किसी उपयोगकर्ता को यह मैसेज मिलता है कि उसके डिवाइस पर यह सुविधा काम नहीं करती, लेकिन उसमें fallback टेक्स्ट है, तो उसके डिवाइस पर fallback टेक्स्ट दिखेगा. इस तरह से, बातचीत को पहले से बेहतर तरीके से जारी रखा जा सकता है. बातचीत की प्रोसेस में रुकावट नहीं आती. इसके अलावा, 400 (FAILED PRECONDITION) की गड़बड़ी को प्रोसेस करने और किसी दूसरे मैसेज को पहचानने में ज़्यादा समय नहीं लगता.

किसी भी दिए गए मैसेज में मौजूद fallback टेक्स्ट, उस मैसेज की तरह ही दिखना चाहिए. उदाहरण के लिए,

  • जिन मैसेज के जवाब देने या कार्रवाइयां करने का सुझाव दिया जाता है उनके लिए, fallback टेक्स्ट में मैसेज का टेक्स्ट शामिल करें. साथ ही, यह भी बताएं कि उपयोगकर्ताओं के पास बातचीत जारी रखने के लिए कौनसे विकल्प उपलब्ध हैं.
  • रिच कार्ड या कैरसेल के लिए, fallback टेक्स्ट में टाइटल और जानकारी शामिल करें. साथ ही, इमेज या वेबसाइटों के लिंक भी शामिल करें.

fallback टेक्स्ट में लाइन ब्रेक डालने के लिए, \n या \r\n का इस्तेमाल करें.

फ़ॉलबैक टेक्स्ट का टेस्ट करें

एजेंट को लॉन्च करने से पहले, यह जांच की जा सकती है कि बातचीत में फ़ॉलबैक टेक्स्ट कैसा दिखता है. इसके लिए, आपको यूआरएल पैरामीटर forceFallback को true पर सेट करने वाला मैसेज भेजना होगा. जब टेक्स्ट को ज़बरदस्ती फ़ॉलबैक किया जाता है, तो बातचीत मुख्य मैसेज के कॉन्टेंट (नीचे दिए गए उदाहरण में टेक्स्ट और ओपन यूआरएल का सुझाव) को नज़रअंदाज़ कर देती है और इसके बजाय फ़ॉलबैक टेक्स्ट दिखाता है.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST \
"https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages?forceFallback=true" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-fallback.sh

Node.js 


/**
 * This code sends a text message to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API defaulting to the fallback text.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    forceFallback: true, // Force usage of the fallback text
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
      fallback: 'This is the fallback text'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-fallback.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class TestFallbackTestSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message with fallback text
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("This is the fallback text")
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Force usage of the fallback text
      messageRequest.setForceFallback(true);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
TestFallbackTestSnippet.java

Python 


"""This code sends a text message to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='This is the fallback text',
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request, force usage of the fallback text
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    forceFallback=True,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-fallback.py

ज़्यादा जानकारी के लिए, Message देखें.

प्रतिनिधि

जब आपका एजेंट मैसेज भेजता है, तो आपको एक प्रतिनिधि की जानकारी देनी होती है: मैसेज बनाने वाला इंसान या ऑटोमेशन. Business Messages में, HUMAN और BOT प्रतिनिधियों का इस्तेमाल किया जा सकता है.

जब किसी भी तरह की ऑटोमेशन टेक्नोलॉजी से मैसेज बनाया जाता है, तो BOT प्रतिनिधि की जानकारी दें. चाहे वह ऑटोमेशन, अपने-आप जवाब देने वाला हो, जो उपयोगकर्ताओं को सूची में उनकी जगह के बारे में बताता हो, नैचुरल लैंग्वेज को समझने वाला जटिल एजेंट हो या उपयोगकर्ता की जानकारी को डाइनैमिक तरीके से ऐक्सेस करता हो. BOT प्रतिनिधियों वाले मैसेज एक छोटे आइकॉन के साथ दिखते हैं. इससे उपयोगकर्ताओं को यह जानने में मदद मिलती है कि वे किस तरह के इंटरैक्शन में दिलचस्पी पैदा कर सकते हैं.

HUMAN प्रतिनिधि की जानकारी सिर्फ़ तब दें, जब कोई लाइव एजेंट मैसेज लिखें. HUMAN के प्रतिनिधि से कोई मैसेज भेजने से पहले, एक REPRESENTATIVE_JOINED इवेंट भेजें. इससे लोगों को पता चलेगा कि वे ज़्यादा फ़्री फ़ॉर्म वाले या मुश्किल मैसेज भेज सकते हैं. HUMAN के प्रतिनिधि से आखिरी मैसेज भेजने के बाद, REPRESENTATIVE_LEFT इवेंट भेजें. इससे उपयोगकर्ताओं की उम्मीदों पर खरा उतरा जा सकता है.

उदाहरण के लिए, अगर कोई उपयोगकर्ता आपके एजेंट से बातचीत शुरू करता है और आपको एक ऑटोमेटेड मैसेज मिलता है कि उसे दो मिनट के अंदर लाइव एजेंट से इंटरैक्ट किया जाएगा, तो यह मैसेज BOT के किसी प्रतिनिधि को भेजा जाना चाहिए. लाइव एजेंट के जुड़ने से पहले, REPRESENTATIVE_JOINED इवेंट भेजें. लाइव एजेंट से मिलने वाले सभी मैसेज को, HUMAN के प्रतिनिधि से आने वाले मैसेज के तौर पर लेबल किया जाना चाहिए. जब लाइव एजेंट बातचीत से बाहर निकल जाए, तब REPRESENTATIVE_LEFT इवेंट भेजें. अगर कोई दूसरा लाइव एजेंट बातचीत में शामिल नहीं होता, तो बाद के सभी मैसेज BOT के प्रतिनिधि से भेजे जाने चाहिए.

की ज़िम्मेदारी अब भी आपकी होगी.

बातचीत के सैंपल के लिए, बॉट से लाइव एजेंट पर हैंडऑफ़ देखें. साथ ही, BOT और HUMAN प्रतिनिधियों के बीच ट्रांज़िशन के लिए कोड देखें.

चाहे कोई प्रतिनिधि BOT हो या HUMAN, आपके पास प्रतिनिधि का डिसप्ले नेम और अवतार बताने का विकल्प होता है. लोगों को डिसप्ले नेम और अवतार, दोनों दिखते हैं. अवतार इमेज का साइज़ 1024x1024 पिक्सल और ज़्यादा से ज़्यादा 50 केबी होना चाहिए. साथ ही, इसे सार्वजनिक तौर पर उपलब्ध यूआरएल के तौर पर दिखाया जाना चाहिए. अगर आप अवतार इमेज नहीं उपलब्ध कराते हैं, तो अवतार के लिए एजेंट के लोगो का इस्तेमाल किया जाता है.

टेक्स्ट

मैसेज का टाइप

सबसे आसान मैसेज, टेक्स्ट से बने होते हैं. टेक्स्ट मैसेज, जानकारी देने के लिए सबसे बेहतर विकल्प होते हैं. इसके लिए विज़ुअल, मुश्किल इंटरैक्शन या जवाब की ज़रूरत नहीं होती.

उदाहरण

यह कोड एक सामान्य मैसेज भेजता है. ज़्यादा जानकारी के लिए, conversations.messages.create देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'text': 'Hello world!',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-text.sh

Node.js 


/**
 * This code sends a text message to the user.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a text message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'This is a test message', 'BOT');
message-text.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendTextMessageSnippet.java

Python 


"""This code sends a text message to the user.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)


representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-text.py

रिच टेक्स्ट

मैसेज का टाइप: रिच टेक्स्ट

अगर containsRichText को true पर सेट किया गया है, तो ऐसे मैसेज में बुनियादी मार्कडाउन फ़ॉर्मैटिंग मौजूद हो सकती है. इसमें हाइपरलिंक शामिल किया जा सकता है या टेक्स्ट को बोल्ड या इटैलिक किया जा सकता है. टेबल में कुछ मान्य उदाहरण दिए गए हैं:

फ़ॉर्मैट करना वर्ण सादा लेख रेंडर किया गया टेक्स्ट
बोल्ड ** **Some text** कुछ टेक्स्ट
इटैलिक * *Some text* कुछ टेक्स्ट
हाइपरलिंक []() [Click here](https://www.example.com) यहां क्लिक करें
लाइन ब्रेक \n Line one\nLine two पहली लाइन
दूसरी लाइन

फ़ॉर्मैटिंग के लिए, कुछ अन्य नियमों का पालन करना ज़रूरी है:

  • सभी लिंक, https:// या http:// से शुरू होने चाहिए
  • अलग-अलग तरह की फ़ॉर्मैटिंग को नेस्ट किया जा सकता है, लेकिन वे ओवरलैप नहीं हो सकते.
  • आपके मैसेज में कहीं भी \n के साथ लाइन ब्रेक की अनुमति है, लेकिन आपके मैसेज के आखिर में मौजूद लाइन ब्रेक नहीं दिखेंगे.
  • आम तौर पर, रिज़र्व किए गए किसी भी वर्ण (*, \, [ या ]) को दिखाने के लिए, आपको उनके आगे बैकस्लैश वर्ण (\) लगाना होगा.

अमान्य फ़ॉर्मैट वाले मैसेज के साथ, अमान्य मार्कडाउन के बारे में गड़बड़ी का मैसेज नहीं भेजा जा सकता. टेबल में ऊपर दिए गए नियमों के आधार पर, कुछ और मान्य और अमान्य उदाहरण दिखाए गए हैं:

सादा लेख मान्य होने की अवधि रेंडर किया गया टेक्स्ट
[Click here](www.example.com) अमान्य. यह लिंक http:// या https:// से शुरू नहीं होता रेंडर नहीं होता.
[**Click here**](https://www.example.com) मान्य है. नेस्ट करने की अनुमति है. यहां क्लिक करें
**This is [not** valid](https://www.example.com) अमान्य. ओवरलैपिंग फ़ॉर्मैटिंग की अनुमति नहीं है. रेंडर नहीं होता.
** Some bold text ** अमान्य. ** के अंदर खाली सफ़ेद जगह नहीं होनी चाहिए. रेंडर नहीं होता.
Citation below\* मान्य है. * वर्ण को एस्केप किया गया है. नीचे उद्धरण*

उदाहरण

यह कोड एक बेहतरीन मैसेज भेजता है. ज़्यादा जानकारी के लिए, conversations.messages.create देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich text to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'fallback': 'Hello, check out this link https://www.google.com.',
  'text': 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
  'containsRichText': 'true',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-rich-text.sh

Node.js 


/**
 * This code sends a rich text to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich text message using markdown to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a rich text message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      containsRichText: true, // Force this message to be processed as rich text
      text: 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
      fallback: 'Hello, check out this link https://www.google.com.'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
message-rich-text.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setContainsRichText(true) // Force this message to be processed as rich text
        .setText("Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).")
        .setFallback("Hello, check out this link https://www.google.com.")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichTextMessageSnippet.java

Python 


"""This code sends a rich text to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich text message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='Hello, check out this link https://www.google.com.',
    containsRichText=True,  # Force this message to be processed as rich text
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-rich-text.py

इमेज

मैसेज के टाइप की इमेज

किसी उपयोगकर्ता को मैसेज में इमेज भेजें.

इमेज और उसके थंबनेल के यूआरएल के साथ, इमेज वाला मैसेज भेजा जा सकता है.

उदाहरण

यह कोड एक इमेज भेजता है. फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, conversations.messages.create और Image देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends an image to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nAn image has been sent with Business Messages.',
    'image': {
      'contentInfo':{
        'altText': 'Image alternative text',
        'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
        'forceRefresh': 'false'
      }
    },
  }"
send-message-image.sh

Node.js 


/**
 * This code sends an image to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts an image message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending an image message
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n An image has been sent with Business Messages.',
        image: {
          contentInfo: {
            altText: 'Some alternative text',
            fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
            forceRefresh: true,
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-image.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendImageMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create an Image
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setRepresentative(representative)
        .setImage(new BusinessMessagesImage()
          .setContentInfo(
            new BusinessMessagesContentInfo()
              .setFileUrl("FILE_URL")
              .setAltText("ALT_TEXT")
              .setForceRefresh("FORCE_REFRESH")
            ));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendImageMessageSnippet.java

Python 


"""This code sends an image to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesImage
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
image_file_url = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create an image message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nAn image has been sent with Business Messages.',
    image=BusinessMessagesImage(
        contentInfo=BusinessMessagesContentInfo(
            altText='Alternative text',
            fileUrl=image_file_url,
            forceRefresh=True
        )
    ))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-image.py

सुझाए गए जवाब

सुझाए गए जवाब

सुझाए गए जवाब ऐसे जवाब देते हैं जो आपके एजेंट को पता हैं कि उन्हें किस तरह से प्रतिक्रिया देनी है, बातचीत के ज़रिए उन्हें गाइड करते हैं.

जब कोई व्यक्ति सुझाए गए जवाब पर टैप करता है, तो आपके एजेंट को एक मैसेज मिलता है. इस मैसेज में जवाब का टेक्स्ट और पोस्टबैक डेटा मौजूद होता है.

सुझाए गए जवाब में ज़्यादा से ज़्यादा 25 वर्ण और एक मैसेज में ज़्यादा से ज़्यादा 13 सुझाव हो सकते हैं.

उदाहरण

यह कोड, सुझाए गए दो जवाबों के साथ मैसेज भेजता है. फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, conversations.messages.create और SuggestedReply देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with suggested replies.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello, world!',
    'fallback': 'Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    'suggestions': [
      {
        'reply': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
        },
      },
      {
        'reply': {
          'text': 'Hi!',
          'postbackData': 'hello-informal',
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-replies.sh

Node.js 


/**
 * This code sends a text mesage to the user with suggested replies.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message of "Hello, world!" to the Business Messages API along with two suggested replies.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  // Create a text message with two suggested replies
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      fallback: 'Hello, world!\n\nReply with "Hello" or "Hi!"',
      text: 'Hello, world!',
      suggestions: [
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-formal',
          },
        },
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-informal',
          },
        },
      ],
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-replies.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedReplySnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello, world!")
        .setFallback("Hello, world!\n\nReply with \"Hello\" or \"Hi!\"")
        .setSuggestions(Arrays.asList(
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hello").setPostbackData("hello-formal")
                ),
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hi!").setPostbackData("hello-informal")
                ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedReplySnippet.java

Python 


"""This code sends a text mesage to the user with suggested replies.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hello',
                postbackData='hello-formal')
            ),
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hi!',
                postbackData='hello-informal')
            )
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-replies.py

सुझाई गई कार्रवाइयाँ

सुझाई गई कार्रवाइयाँ

सुझाई गई कार्रवाइयां, डिवाइस की मूल फ़ंक्शन का इस्तेमाल करके उपयोगकर्ताओं को बातचीत के ज़रिए गाइड करती हैं. जब कोई उपयोगकर्ता सुझाई गई किसी कार्रवाई पर टैप करता है, तो आपके एजेंट को एक मैसेज मिलता है. इस मैसेज में, उस कार्रवाई का टेक्स्ट और पोस्टबैक डेटा मौजूद होता है.

सुझाई गई कार्रवाइयों में ज़्यादा से ज़्यादा 25 वर्ण और एक मैसेज में ज़्यादा से ज़्यादा 13 सुझाव शामिल हो सकते हैं.

फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, conversations.messages.create और SuggestedAction देखें.

यूआरएल खोलने के लिए कार्रवाई

'यूआरएल खोलें' कार्रवाई से आपका एजेंट, उपयोगकर्ता को यूआरएल खोलने का सुझाव देता है. अगर किसी ऐप्लिकेशन को यूआरएल के लिए डिफ़ॉल्ट हैंडलर के तौर पर रजिस्टर किया गया है, तो एक ऐप्लिकेशन खुलेगा. इस कार्रवाई का आइकॉन, ऐप्लिकेशन का आइकॉन होगा. ओपन यूआरएल ऐक्शन सिर्फ़ एचटीटीपी और एचटीटीपीएस प्रोटोकॉल वाले यूआरएल के साथ काम करते हैं. दूसरे प्रोटोकॉल (जैसे कि mailto) नहीं किए जा सकते.

यह कोड, 'यूआरएल खोलें' कार्रवाई के साथ टेक्स्ट भेजता है. फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, OpenUrlAction देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action toopen a URL
# and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-open-url.sh

Node.js 


/**
 * This code sends a text mesage to the user with a suggestion action toopen a URL
 * and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with an open URL action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an open url action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
        text: 'Hello world!',
        suggestions: [
          {
            action: {
              text: 'Hello',
              postbackData: 'hello-formal',
              openUrlAction: {
                url: 'https://www.growingtreebank.com',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}


/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-open-url.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an open url action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello world!")
        .setFallback("Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Hello").setPostbackData("hello-formal")
                  .setOpenUrlAction(
                      new BusinessMessagesOpenUrlAction().setUrl("https://www.growingtreebank.com"))
              ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedActionSnippet.java

Python 


"""This code sends a text mesage to the user with a suggestion action to open a URL.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesOpenUrlAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an open url action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Hello',
                postbackData='hello-formal',
                openUrlAction=BusinessMessagesOpenUrlAction(
                    url='https://www.growingtreebank.com'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-open-url.py

डायल करने की कार्रवाई

डायल करने की कार्रवाई से, उपयोगकर्ता को डायल करने के लिए एक फ़ोन नंबर का सुझाव मिलता है. जब कोई उपयोगकर्ता डायल कार्रवाई के सुझाव वाले चिप पर टैप करता है, तो उपयोगकर्ता का डिफ़ॉल्ट डायलर ऐप्लिकेशन खुलता है. इसमें, फ़ोन नंबर की जानकारी पहले से भरी होती है.

यह कोड, डायल कार्रवाई के साथ मैसेज भेजता है. फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, DialAction देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action to dial
# a phone number and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Contact support for help with this issue.',
    'fallback': 'Give us a call at +12223334444.',
    'suggestions': [
      {
        'action': {
          'text': 'Call support',
          'postbackData': 'call-support',
          'dialAction': {
            'phoneNumber': '+12223334444',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-dial.sh

Node.js 


/**
 * This code sends a text mesage to the user with a suggestion action to dial
 * a phone number and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a dial suggested action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a dial action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Give us a call at +12223334444.',
        text: 'Contact support for help with this issue.',
        suggestions: [
          {
            action: {
              text: 'Call support',
              postbackData: 'call-support',
              dialAction: {
                phoneNumber: '+12223334444',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-dial.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendDialActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a dial action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Contact support for help with this issue.")
        .setFallback("Give us a call at +12223334444.")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Call support").setPostbackData("call-support")
                  .setDialAction(
                      new BusinessMessagesDialAction().setPhoneNumber("+12223334444"))
              )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendDialActionSnippet.java

Python 


"""Sends a text mesage to the user with a suggestion action to dial a phone number.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesDialAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with a dial action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Contact support for help with this issue.',
    fallback='Give us a call at +12223334444.',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Call support',
                postbackData='call-support',
                dialAction=BusinessMessagesDialAction(
                    phoneNumber='+12223334444'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-dial.py

पुष्टि करने के अनुरोध का सुझाव

पुष्टि करने के अनुरोध का सुझाव

पुष्टि के अनुरोध के सुझाव, उपयोगकर्ताओं को OAuth 2.0 के मुताबिक काम करने वाले ऐप्लिकेशन में साइन इन करने, खाते के डेटा की पुष्टि करने के लिए पुष्टि करने वाले कोड पास करने, और पसंद के मुताबिक उपयोगकर्ता अनुभव देने और बातचीत के फ़्लो की पूरी जानकारी देने के लिए कहता है. OAuth की मदद से पुष्टि करना लेख पढ़ें.

उदाहरण

नीचे दिया गया कोड, पुष्टि करने के अनुरोध के सुझाव वाला टेक्स्ट भेजता है. फ़ॉर्मैट और वैल्यू के विकल्पों के लिए, conversations.messages.create और Suggestion देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with an authentication request suggestion
# that allows the user to authenticate with OAuth. It also has a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json
# Replace the __CLIENT_ID__
# Replace the __CODE_CHALLENGE__
# Replace the __SCOPE__

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Sign in to continue the conversation.',
    'fallback': 'Visit support.growingtreebank.com to continue.',
    'suggestions': [
      {
        'authenticationRequest': {
          'oauth': {
            'clientId': '__CLIENT_ID__',
            'codeChallenge': '__CODE_CHALLENGE__',
            'scopes': [
              '__SCOPE__',
            ],
          },
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-authentication-request-suggestion.sh

Node.js 


/**
 * This code sends a text message to the user with an authentication request suggestion
 * that allows the user to authenticate with OAuth. It also has a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Before continuing, learn more about the prerequisites for authenticating
 * with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en
 *
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';
const OAUTH_CLIENT_ID = 'EDIT_HERE';
const OAUTH_CODE_CHALLENGE = 'EDIT_HERE';
const OAUTH_SCOPE = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API along with an authentication request.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an authentication request
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Visit support.growingtreebank.com to continue.',
        text: 'Sign in to continue the conversation.',
        suggestions: [
          {
            authenticationRequest: {
              oauth: {
                clientId: OAUTH_CLIENT_ID,
                codeChallenge: OAUTH_CODE_CHALLENGE,
                scopes: [OAUTH_SCOPE]
              }
            }
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-authentication-request-suggestion.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendAuthenticationRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an authentication request
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setAuthenticationRequest(new BusinessMessagesAuthenticationRequest()
                .setOauth(new BusinessMessagesAuthenticationRequestOauth()
                    .setClientId("CLIENT_ID")
                    .setCodeChallenge("CODE_CHALLENGE")
                    .setScopes(Arrays.asList("SCOPE"))
                )))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendAuthenticationRequestSuggestionSnippet.java

Python 


"""Sends a text message to the user with an authentication request suggestion.

It allows the user to authenticate with OAuth and has a fallback text.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequestOauth
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Before continuing, learn more about the prerequisites for authenticating
# with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
oauth_client_id = 'EDIT_HERE'
oauth_code_challenge = 'EDIT_HERE'
oauth_scope = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an authentication request
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Sign in to continue the conversation.',
    fallback='Visit support.growingtreebank.com to continue.',
    suggestions=[
        BusinessMessagesSuggestion(
            authenticationRequest=BusinessMessagesAuthenticationRequest(
                oauth=BusinessMessagesAuthenticationRequestOauth(
                    clientId=oauth_client_id,
                    codeChallenge=oauth_code_challenge,
                    scopes=[oauth_scope])
                )
            ),
        ]
    )

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-authentication-request-suggestion.py

लाइव एजेंट के अनुरोध का सुझाव

लाइव एजेंट के अनुरोध का सुझाव

लाइव एजेंट के अनुरोध से जुड़े सुझाव की मदद से, उपयोगकर्ताओं को यह सुविधा दी जा सकती है कि वे जटिल इंटरैक्शन के दौरान या जब आपका ऑटोमेशन, किसी उपयोगकर्ता के अनुरोध को हैंडल न कर पाए, तब वे मानवीय प्रतिनिधियों से इंटरैक्ट कर सकें.

ओवरफ़्लो मेन्यू में जाकर, उपयोगकर्ता बातचीत के दौरान किसी भी समय लाइव एजेंट से अनुरोध कर सकते हैं. इस सुझाव से एजेंट को प्रोग्राम के हिसाब से, बातचीत के संदर्भ के आधार पर, मानवीय प्रतिनिधियों के साथ इंटरैक्शन के सुझाव देने का मौका मिलता है. लाइव एजेंट के अनुरोध किए गए इवेंट का जवाब देने के लिए, आपके एजेंट को हमेशा तैयार रहना चाहिए. भले ही, उसने लाइव एजेंट के लिए अनुरोध का सुझाव न भेजा हो.

जब लोग लाइव एजेंट के अनुरोध के सुझाव पर टैप करते हैं, तब यह लाइव एजेंट से इवेंट के लिए अनुरोध किए गए लाइव एजेंट को ट्रिगर करता है.

उदाहरण

यह कोड, लाइव एजेंट के अनुरोध के सुझाव के साथ मैसेज भेजता है. फ़ॉर्मैट और वैल्यू के विकल्पों के लिए, conversations.messages.create और Suggestion देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a Live agent request suggestion
# that allows the user to connect with a Live agent.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Would you like to chat with a live agent?',
    'fallback': 'Would you like to chat with a live agent?',
    'suggestions': [
      {
        'liveAgentRequest': {},
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-live-agent-request-suggestion.sh

Node.js 


/**
 * This code sends a text message to the user with a Live agent request suggestion
 * that allows the user to connect with a Live agent.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a live agent request action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 */
 async function sendMessage(conversationId) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a request for live agent action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: 'BOT', // Must be sent from a BOT representative
        },
        fallback: 'Would you like to chat with a live agent?',
        text: 'Would you like to chat with a live agent?',
        suggestions: [
          {
            liveAgentRequest: {}
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID);
send-message-live-agent-request-suggestion.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendLiveAgentRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a live request action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setLiveAgentRequest(new BusinessMessagesLiveAgentRequest()))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("BOT")); // Must be sent from a BOT representative

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendLiveAgentRequestSuggestionSnippet.java

Python 


"""Sends a text message to the user with a Live agent request suggestion.

It allows the user to connect with a Live agent.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesLiveAgentRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

# Create a text message with a live agent request action and fallback text
# Follow instructions at https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(  # Must be sent from a BOT representative
        representativeType=BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
    ),
    text='Would you like to chat with a live agent?',
    fallback='Would you like to chat with a live agent?',
    suggestions=[
        BusinessMessagesSuggestion(
            liveAgentRequest=BusinessMessagesLiveAgentRequest()
        )
    ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-live-agent-request-suggestion.py

रिच कार्ड

रिच कार्ड

जब आपको संबंधित जानकारी, मीडिया या सुझावों का कुछ हिस्सा भेजना हो, तो आपको रिच कार्ड भेजना चाहिए. रिच कार्ड की मदद से आपका एजेंट एक ही मैसेज में, कई यूनिट की जानकारी भेज सकता है.

रिच कार्ड में ये आइटम हो सकते हैं:

  • मीडिया (JPG, JPEG या PNG, ज़्यादा से ज़्यादा 5 एमबी)
  • मीडिया थंबनेल (JPG, JPEG या PNG, ज़्यादा से ज़्यादा 25 केबी का हो)
  • ज़्यादा से ज़्यादा 200 वर्णों का टाइटल
  • ज़्यादा से ज़्यादा 2,000 वर्णों की जानकारी
  • सुझाए गए जवाबों और सुझाई गई कार्रवाइयों की सूची (ज़्यादा से ज़्यादा चार)

रिच कार्ड में सूची में शामिल सभी या कोई एक आइटम शामिल हो सकता है. हालांकि, कार्ड में कम से कम मीडिया या शीर्षक होने चाहिए, ताकि वह मान्य हो. किसी रिच कार्ड में ज़्यादा से ज़्यादा चार सुझाई गई कार्रवाइयां और सुझाए गए जवाब हो सकते हैं.

आपका एजेंट रिच कार्ड कैरसेल में एक साथ कई रिच कार्ड भेज सकता है.

उदाहरण

यह कोड एक इमेज और सुझाए गए जवाबों के साथ एक रिच कार्ड भेजता है. फ़ॉर्मैट और वैल्यू के विकल्पों के लिए, conversations.messages.create और RichCard देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich card to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    'richCard': {
      'standaloneCard': {
        'cardContent': {
          'title': 'Hello, world!',
          'description': 'Sent with Business Messages.',
          'media': {
            'height': 'TALL',
            'contentInfo':{
              'altText': 'Google logo',
              'fileUrl': 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
              'forceRefresh': 'false'
            }
          },
          'suggestions': [
            {
              'reply': {
                'text': 'Suggestion #1',
                'postbackData': 'suggestion_1'
              }
            },
            {
              'reply': {
                'text': 'Suggestion #2',
                'postbackData': 'suggestion_2'
              }
            }
          ]
        }
      }
    }
  }"
send-message-rich-card.sh

Node.js 


/**
 * This code sends a rich card to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a rich card message with two suggested replies
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
        richCard: {
          standaloneCard: {
            cardContent: {
              title: 'Hello, world!',
              description: 'Sent with Business Messages.',
              media: {
                height: 'TALL',
                contentInfo: {
                  altText: 'Google logo',
                  fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                  forceRefresh: false,
                },
              },
              suggestions: [
                {
                  reply: {
                    text: 'Suggestion #1',
                    postbackData: 'suggestion_1',
                  },
                },
                {
                  reply: {
                    text: 'Suggestion #2',
                    postbackData: 'suggestion_2',
                  },
                },
              ],
            },
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setStandaloneCard(new BusinessMessagesStandaloneCard()
                .setCardContent(
                    new BusinessMessagesCardContent()
                        .setTitle("Hello, world!")
                        .setDescription("Sent with Business Messages.")
                        .setSuggestions(Arrays.asList(
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #1").setPostbackData("suggestion_1")
                                ),
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #2").setPostbackData("suggestion_2")
                                ))
                        )
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(
                                new BusinessMessagesContentInfo()
                                    .setAltText("Google logo")
                                    .setFileUrl("https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png")
                                    .setForceRefresh(false)
                            ))
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardMessageSnippet.java

Python 


"""This code sends a rich card to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesStandaloneCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich card message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    richCard=BusinessMessagesRichCard(
        standaloneCard=BusinessMessagesStandaloneCard(
            cardContent=BusinessMessagesCardContent(
                title='Hello, world!',
                description='Sent with Business Messages.',
                suggestions=[
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #1',
                            postbackData='suggestion_1')
                        ),
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #2',
                            postbackData='suggestion_2')
                        )
                ],
                media=BusinessMessagesMedia(
                    height=BusinessMessagesMedia.HeightValueValuesEnum.TALL,
                    contentInfo=BusinessMessagesContentInfo(
                        altText='Google logo',
                        fileUrl='https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                        forceRefresh=False
                    ))
                ))))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card.py

रिच कार्ड के कैरसेल

रिच कार्ड कैरसेल

जब आपको किसी उपयोगकर्ता को चुनने के लिए कई विकल्प दिखाने हों, तो रिच कार्ड कैरसेल का इस्तेमाल करें. कैरसेल एक साथ कई रिच कार्ड स्ट्रिंग करता है, जिनकी मदद से उपयोगकर्ता आइटम की तुलना कर सकते हैं और हर एक आइटम पर अलग-अलग प्रतिक्रिया दे सकते हैं.

कैरसेल में कम से कम दो और ज़्यादा से ज़्यादा 10 रिच कार्ड हो सकते हैं. कैरसेल में मौजूद रिच कार्ड, कॉन्टेंट और ऊंचाई के लिए रिच कार्ड की सामान्य शर्तों के मुताबिक होने चाहिए.

उदाहरण

यह कोड, रिच कार्ड कैरसेल भेजता है. फ़ॉर्मैटिंग और वैल्यू के विकल्पों के लिए, conversations.messages.create और RichCard देखें.

cURL 

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends to the user a carousel with rich cards and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    'richCard': {
      'carouselCard': {
        'cardWidth': 'MEDIUM',
        'cardContents': [
          {
            'title': 'Card #1',
            'description': 'The description for card #1',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #1',
                  'postbackData': 'card_1'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                'forceRefresh': 'false',
              }
            }
          },
          {
            'title': 'Card #2',
            'description': 'The description for card #2',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #2',
                  'postbackData': 'card_2'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                'forceRefresh': 'false',
              }
            }
          }
        ]
      }
    }
  }"
send-message-rich-card-carousel.sh

Node.js 


/**
 * This code sends to the user a carousel with rich cards and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a carousel card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending carousel message
    // with two cards and a suggested reply for each card
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
        richCard: {
          carouselCard: {
            cardWidth: 'MEDIUM',
            cardContents: [
              {
                title: 'Card #1',
                description: 'The description for card #1',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #1',
                      postbackData: 'card_1'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                    forceRefresh: 'false',
                  }
                }
              },
              {
                title: 'Card #2',
                description: 'The description for card #2',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #2',
                      postbackData: 'card_2'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                    forceRefresh: 'false',
                  }
                }
              }
            ]
          }
        }
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card-carousel.js

Java 

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardCarouselMessage {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setCarouselCard(new BusinessMessagesCarouselCard().setCardWidth("MEDIUM")
                .setCardContents(Arrays.asList(
                    new BusinessMessagesCardContent()
                        .setTitle("Card #1")
                        .setDescription("The description for card #1")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #1").setPostbackData("card_1")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg"))),
                    new BusinessMessagesCardContent()
                        .setTitle("Card #2")
                        .setDescription("The description for card #2")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #2").setPostbackData("card_2")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg")))
                    )
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardCarouselMessage.java

Python 


"""This code sends to the user a carousel with rich cards and a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesCarouselCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a carousel message with two cards and a suggested reply for each card
# and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    richCard=BusinessMessagesRichCard(
        carouselCard=BusinessMessagesCarouselCard(
            cardWidth=BusinessMessagesCarouselCard.CardWidthValueValuesEnum.MEDIUM,
            cardContents=[
                BusinessMessagesCardContent(
                    title='Card #1',
                    description='The description for card #1',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #1',
                                postbackData='card_1')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                            forceRefresh=False))),
                BusinessMessagesCardContent(
                    title='Card #2',
                    description='The description for card #2',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #2',
                                postbackData='card_2')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                            forceRefresh=False)))
            ])))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card-carousel.py