إرسال الرسائل

بعد تلقّي رسالة من مستخدم، يمكنك إرسال ردّ لمواصلة المحادثة. يمكنك إرسال رسائل إلى مستخدم لمدة تصل إلى 30 يومًا بعد آخر رسالة أرسلها.

تتواصل البرامج الحوارية مع المستخدمين من خلال إرسال الرسائل واستلامها. لإرسال رسائل إلى المستخدمين، يرسل موظّف الدعم طلبات الرسائل إلى Business Messages.

ملاحظة: إذا أردت استخدام سطر الأوامر لطلبات البيانات من واجهة برمجة التطبيقات، ثبِّت oauth 2l.

لإرسال رسالة، عليك إرسال طلب HTTP POST إلى Business Messages API يتضمّن

• معرّف فريد للرسالة
• معرّف المحادثة
• محتوى الرسالة

عندما ترسل واجهة برمجة التطبيقات Business Messages API رسالتك إلى المستخدم، تعرض 200 OK. إذا كانت هناك قيم مطلوبة غير متوفّرة في رسالتك، ستعرض واجهة برمجة التطبيقات الخطأ 400. إذا كانت الرسالة تستخدم بيانات اعتماد غير صالحة، ستعرض واجهة برمجة التطبيقات الخطأ 401.

استخدِم صفحة سجلّات Business Communications Developer Console لتصحيح أخطاء مشاكل تسليم الرسائل.

استراتيجية احتياطية

إذا كان جهاز المستخدم لا يتوافق مع رسالة تحاول إرسالها، مثلاً إذا كان المستخدم لا يمكنه تلقّي الردود المقترَحة، ستعرض واجهة برمجة التطبيقات الخطأ 400 (FAILED PRECONDITION). ومع ذلك، يمكنك تجاوز أنواع الرسائل غير المتوافقة من خلال تحديد نص fallback لكل رسالة ترسلها. إذا حدّدت fallback text، يعرض واجهة برمجة التطبيقات الرد 200 OK، حتى إذا كان جهاز المستخدم لا يتوافق مع نوع الرسالة.

إذا تلقّى المستخدم رسالة لا يتوافق معها جهازه ولكنها تتضمّن نص fallback، سيعرض جهازه نص fallback بدلاً من ذلك. يتيح لك هذا السلوك مواصلة المحادثة بشكل استباقي بدون مقاطعة سير المحادثة أو استغراق وقت إضافي لمعالجة خطأ 400 (FAILED PRECONDITION) وتحديد رسالة بديلة.

يجب أن يعكس نص fallback أي رسالة وظيفة الرسالة. على سبيل المثال:

• بالنسبة إلى الرسائل التي تتضمّن ردودًا أو إجراءات مقترَحة، أدرِج نص الرسالة في fallback، وقدِّم إرشادات حول الخيارات المتاحة للمستخدمين لمواصلة المحادثة.
• بالنسبة إلى البطاقات التفاعلية أو لوحات العرض الدوّارة، أدرِج العنوان والوصف في نص fallback، وأدرِج روابط تؤدي إلى الصور أو المواقع الإلكترونية.

لإدراج فواصل أسطر في نص fallback، استخدِم \n أو \r\n.

نص احتياطي تجريبي

قبل إطلاق وكيل، يمكنك اختبار طريقة ظهور النص الاحتياطي في محادثة من خلال إرسال رسالة تتضمّن مَعلمة عنوان URL forceFallback مضبوطة على true. عند فرض استخدام النص الاحتياطي، تتجاهل المحادثة محتوى الرسالة الرئيسية (النص واقتراح "فتح عنوان URL" في المثال التالي) وتعرض النص الاحتياطي بدلاً من ذلك.

ملاحظة: لا تتوفّر مَعلمة عنوان URL‏ forceFallback للوكلاء الذين تم إطلاقهم.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST \
"https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages?forceFallback=true" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-fallback.sh

Node.js

/**
 * This code sends a text message to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API defaulting to the fallback text.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    forceFallback: true, // Force usage of the fallback text
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
      fallback: 'This is the fallback text'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-fallback.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class TestFallbackTestSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message with fallback text
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("This is the fallback text")
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Force usage of the fallback text
      messageRequest.setForceFallback(true);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
TestFallbackTestSnippet.java

Python

"""This code sends a text message to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#fallback_strategy

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='This is the fallback text',
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request, force usage of the fallback text
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    forceFallback=True,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-fallback.py

للحصول على التفاصيل، يُرجى الاطّلاع على Message.

النيابة في مجلس النواب

عندما يرسل الوكيل رسالة، عليك تحديد ممثل: وهو الشخص أو نظام التشغيل الآلي الذي كتب الرسالة. تتيح ميزة "الرسائل التجارية" استخدام ممثلي HUMAN وBOT.

حدِّد BOT ممثلاً عندما تنشئ أي عملية آلية رسالة، سواء كانت العملية الآلية عبارة عن ردّ تلقائي يخبر المستخدمين بمكانهم في قائمة الانتظار، أو وكيل معقّد لفهم اللغة الطبيعية يمكنه الوصول بشكل ديناميكي إلى تفاصيل المستخدمين، أو أي شيء بينهما. تظهر الرسائل التي تتضمّن BOT ممثلين مع أيقونة صغيرة تساعد في تحديد توقعات المستخدمين بشأن أنواع التفاعلات التي قد يشاركون فيها.

يجب تحديد HUMAN ممثّل فقط عندما يكتب موظّف دعم مباشر رسالة. قبل إرسال أي رسائل من HUMAN ممثل، أرسِل REPRESENTATIVE_JOINED حدثًا لإعلام المستخدمين بأنّه يمكنهم إرسال المزيد من الرسائل الحرة أو المعقّدة. بعد إرسال آخر رسالة من ممثل HUMAN، أرسِل حدث REPRESENTATIVE_LEFT لتحديد توقعات المستخدمين مرة أخرى.

على سبيل المثال، إذا بدأ مستخدم محادثة مع وكيلك وأرسلت رسالة مبرمَجة تفيد بأنّه سيتم التواصل معه من خلال موظف دعم حقيقي في غضون دقيقتَين، يجب إرسال هذه الرسالة من BOT. قبل انضمام الموظف المباشر، أرسِل حدث REPRESENTATIVE_JOINED. يجب تصنيف جميع الرسائل الواردة من الوكيل المباشر على أنّها واردة من HUMAN ممثّل. عندما يغادر الموظف المباشر المحادثة، أرسِل حدث REPRESENTATIVE_LEFT. يجب أن تصلك جميع الرسائل اللاحقة من ممثل BOT ما لم ينضم وكيل دعم مباشر آخر إلى المحادثة.

ملاحظة: في حال تفعيل الردود التلقائية من خلال عملية الدمج مع Dialogflow، ستظل مسؤولاً عن معالجة طلبات التواصل مع وكيل مباشر، وإرسال REPRESENTATIVE_JOINED وREPRESENTATIVE_LEFT الأحداث المناسبة، وإرسال الرسائل إلى ممثلي HUMAN.

راجِع نقل المحادثة من برنامج التتبُّع إلى وكيل مباشر للاطّلاع على نموذج محادثة ورمز للانتقال بين ممثلي BOT وHUMAN.

سواء كان الممثّل BOT أو HUMAN، يمكنك تحديد اسم معروض وصورة رمزية للممثّل. يظهر كل من الاسم المعروض والصورة الرمزية للمستخدمين. يجب أن تكون صور الأفاتار بحجم 1024x1024 بكسل وبحد أقصى 50 كيلوبايت، ويجب تحديدها كعناوين URL متاحة للجميع. وفي حال عدم توفير صورة أفاتار، سيتم استخدام شعار الوكيل كأفاتار للممثّل.

ملاحظة: لا تتوافق صور الأفاتار مع المعلومات الشخصية، مثل صور الممثلين في الصور الفوتوغرافية. استخدِم صورًا لا تحدّد هوية الأفراد، مثل الرموز أو الشعارات أو الرسوم التوضيحية الوهمية. بعد استخدام صورة رمزية في رسالة، لا يمكن تعديلها أو حذفها.

نص

تتألف أبسط الرسائل من نص. تُعد الرسائل النصية الخيار الأفضل لنقل المعلومات بدون الحاجة إلى عناصر مرئية أو تفاعل معقّد أو ردود.

مثال

يرسل الرمز التالي رسالة نصية بسيطة. للحصول على معلومات مرجعية، يُرجى الاطّلاع على conversations.messages.create.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'text': 'Hello world!',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-text.sh

Node.js

/**
 * This code sends a text message to the user.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a text message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} message The message text to send the user.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      text: message,
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'This is a test message', 'BOT');
message-text.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a basic text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("MESSAGE_TEXT")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendTextMessageSnippet.java

Python

"""This code sends a text message to the user.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)


representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='This is a sample text')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-text.py

نص منسَّق

ملاحظة: هذه الميزة مخصّصة للرسائل فقط، ولا تتوافق مع رسائل الترحيب أو الردود المقترَحة أو الإجراءات المقترَحة أو البطاقات التفاعلية.

قد تتضمّن الرسائل النصية التي تم ضبط containsRichText فيها على true تنسيق Markdown الأساسي. يمكنك تضمين روابط تشعبية أو كتابة النص بخط غامق أو مائل. يعرض الجدول بعض الأمثلة الصالحة:

التنسيق	الأحرف	نص عادي	النص المعروض
غامق	**	**Some text**	بعض النصوص
مائل	*	*Some text*	بعض النصوص
Hyperlink	[]()	[Click here](https://www.example.com)	انقر هنا
فاصل سطر	\n	Line one\nLine two	السطر الأول السطر الثاني

يجب أن يتّبع التنسيق بعض القواعد الإضافية:

• يجب أن تبدأ جميع الروابط بـ https:// أو http://
• يمكن أن تكون أنواع التنسيق المختلفة متداخلة ولكن لا يمكن أن تتداخل بأي طريقة أخرى.
• يُسمح بفواصل الأسطر باستخدام \n في أي مكان في رسالتك، ولكن لا يتم عرض فواصل الأسطر في نهاية رسالتك.
• لعرض أي من الأحرف المحجوزة (* أو \ أو [ أو ]) بشكل عادي، يجب إضافة شرطة مائلة عكسية (\) قبلها.

إذا كان تنسيق الرسائل غير صالح، لن يتم إرسالها وستظهر رسالة خطأ بشأن Markdown غير صالح. يعرض الجدول بعض الأمثلة الإضافية الصالحة وغير الصالحة استنادًا إلى القواعد المذكورة أعلاه:

نص عادي	الصلاحية	النص المعروض
[Click here](www.example.com)	غير صالح لا يبدأ الرابط بـ http:// أو https://	لا يتم عرضها.
[**Click here**](https://www.example.com)	صالح يُسمح بالتداخل.	انقر هنا
**This is [not** valid](https://www.example.com)	غير صالح لا يُسمح بالتنسيق المتداخل.	لا يتم عرضها.
** Some bold text **	غير صالح لا يُسمح بوجود مسافة بيضاء لاحقة داخل **.	لا يتم عرضها.
Citation below\*	صالح يتم إلغاء الحرف *.	الاقتباس أدناه*

ملاحظة: لا يمكن لبعض برامج قراءة الشاشة قراءة أكثر من رابط واحد في الرسالة نفسها. لا تُضِف أكثر من رابط واحد لكل رسالة.

مثال

يرسل الرمز التالي رسالة نصية منسّقة. للحصول على معلومات مرجعية، يُرجى الاطّلاع على conversations.messages.create.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich text to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
  'messageId': '$(uuidgen)',
  'fallback': 'Hello, check out this link https://www.google.com.',
  'text': 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
  'containsRichText': 'true',
  'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
  }
}"
message-rich-text.sh

Node.js

/**
 * This code sends a rich text to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich text message using markdown to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, message, representativeType) {
  const authClient = await initCredentials();

  // Create the payload for sending a rich text message
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      containsRichText: true, // Force this message to be processed as rich text
      text: 'Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).',
      fallback: 'Hello, check out this link https://www.google.com.'
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
message-rich-text.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichTextMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich text message
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setContainsRichText(true) // Force this message to be processed as rich text
        .setText("Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).")
        .setFallback("Hello, check out this link https://www.google.com.")
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichTextMessageSnippet.java

Python

"""This code sends a rich text to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich_text

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich text message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    fallback='Hello, check out this link https://www.google.com.',
    containsRichText=True,  # Force this message to be processed as rich text
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, here is some **bold text**, *italicized text*, and a [link](https://www.google.com).')

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
message-rich-text.py

الصور

إرسال صورة إلى مستخدم في رسالة

يمكنك إرسال رسالة صورة تتضمّن عناوين URL للصورة والصورة المصغّرة.

مثال

ترسل التعليمة البرمجية التالية صورة. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الاطّلاع على conversations.messages.create وImage.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends an image to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nAn image has been sent with Business Messages.',
    'image': {
      'contentInfo':{
        'altText': 'Image alternative text',
        'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
        'forceRefresh': 'false'
      }
    },
  }"
send-message-image.sh

Node.js

/**
 * This code sends an image to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts an image message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending an image message
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n An image has been sent with Business Messages.',
        image: {
          contentInfo: {
            altText: 'Some alternative text',
            fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
            forceRefresh: true,
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-image.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendImageMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create an Image
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setRepresentative(representative)
        .setImage(new BusinessMessagesImage()
          .setContentInfo(
            new BusinessMessagesContentInfo()
              .setFileUrl("FILE_URL")
              .setAltText("ALT_TEXT")
              .setForceRefresh("FORCE_REFRESH")
            ));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendImageMessageSnippet.java

Python

"""This code sends an image to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#images

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesImage
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
image_file_url = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create an image message with fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nAn image has been sent with Business Messages.',
    image=BusinessMessagesImage(
        contentInfo=BusinessMessagesContentInfo(
            altText='Alternative text',
            fileUrl=image_file_url,
            forceRefresh=True
        )
    ))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-image.py

الردود المقترَحة

توجّه الردود المقترَحة المستخدمين خلال المحادثات من خلال تقديم ردود يعرف وكيلك كيفية التفاعل معها.

عندما ينقر المستخدم على ردّ مقترَح، يتلقّى برنامج الدردشة رسالة تتضمّن نص الردّ وبيانات الردّ التلقائي.

يمكن أن تتضمّن الردود المقترَحة 25 حرفًا كحد أقصى، ويمكن أن تتضمّن الرسالة 13 اقتراحًا كحد أقصى.

تنبيه: على وكلاء الدعم عدم الاعتماد على الردود المقترَحة فقط لتفعيل الردود المبرمَجة. إذا كان لدى المستخدم إصدار قديم من أحد البرامج، قد لا يتمكّن هذا البرنامج من عرض الردود المقترَحة. تأكَّد من أنّ إدخال المستخدمين لنص حر يمكن أن يؤدي إلى تشغيل الردود التلقائية، واحرص على إنشاء رسالة ترحيب جيدة

تتضمّن وظائف الوكيل.

مثال

ترسل التعليمات البرمجية التالية نصًا يتضمّن ردّين مقترَحيْن. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الاطّلاع على conversations.messages.create وSuggestedReply.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with suggested replies.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello, world!',
    'fallback': 'Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    'suggestions': [
      {
        'reply': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
        },
      },
      {
        'reply': {
          'text': 'Hi!',
          'postbackData': 'hello-informal',
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-replies.sh

Node.js

/**
 * This code sends a text mesage to the user with suggested replies.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message of "Hello, world!" to the Business Messages API along with two suggested replies.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  // Create a text message with two suggested replies
  const apiParams = {
    auth: authClient,
    parent: 'conversations/' + conversationId,
    resource: {
      messageId: uuidv4(),
      representative: {
        representativeType: representativeType,
      },
      fallback: 'Hello, world!\n\nReply with "Hello" or "Hi!"',
      text: 'Hello, world!',
      suggestions: [
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-formal',
          },
        },
        {
          reply: {
            text: 'Hello',
            postbackData: 'hello-informal',
          },
        },
      ],
    },
  };

  // Call the message create function using the
  // Business Messages client library
  bmApi.conversations.messages.create(apiParams,
    {auth: authClient}, (err, response) => {
    console.log(err);
    console.log(response);
  });
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-replies.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedReplySnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello, world!")
        .setFallback("Hello, world!\n\nReply with \"Hello\" or \"Hi!\"")
        .setSuggestions(Arrays.asList(
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hello").setPostbackData("hello-formal")
                ),
            new BusinessMessagesSuggestion()
                .setReply(new BusinessMessagesSuggestedReply()
                    .setText("Hi!").setPostbackData("hello-informal")
                ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedReplySnippet.java

Python

"""This code sends a text mesage to the user with suggested replies.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#suggested_replies

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hello',
                postbackData='hello-formal')
            ),
        BusinessMessagesSuggestion(
            reply=BusinessMessagesSuggestedReply(
                text='Hi!',
                postbackData='hello-informal')
            )
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-replies.py

الإجراءات المقترَحة

توجّه الإجراءات المقترَحة المستخدمين خلال المحادثات من خلال الاستفادة من الوظائف المضمّنة في أجهزتهم. عندما ينقر المستخدم على إجراء مقترَح، يتلقّى وكيلك رسالة تتضمّن نص الإجراء وبيانات الردّ.

يبلغ الحد الأقصى لعدد الأحرف في الإجراءات المقترَحة 25 حرفًا، ويبلغ الحد الأقصى لعدد الاقتراحات في الرسالة 13 اقتراحًا.

تنبيه: يجب ألّا يعتمد العملاء على الإجراءات المقترَحة فقط لتفعيل سلوكيات المستخدمين. إذا كان لدى المستخدم إصدار قديم من أحد التطبيقات، قد لا يتمكّن هذا التطبيق من عرض الإجراءات المقترَحة.

للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى conversations.messages.create و SuggestedAction.

إجراء فتح عنوان URL

باستخدام إجراء OpenURL، يقترح الوكيل على المستخدم فتح عنوان URL. إذا تم تسجيل تطبيق كمعالج تلقائي لعنوان URL، سيتم فتح التطبيق بدلاً من ذلك، وسيكون رمز الإجراء هو رمز التطبيق. لا تتوافق إجراءات فتح عنوان URL إلا مع عناوين URL التي تستخدم بروتوكولَي HTTP وHTTPS، ولا تتوافق مع البروتوكولات الأخرى (مثل mailto).

يرسل الرمز التالي نصًا مع إجراء "فتح عنوان URL". للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى OpenUrlAction.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action toopen a URL
# and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Hello world!',
    'fallback': 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
    'suggestions': [
      {
        'action': {
          'text': 'Hello',
          'postbackData': 'hello-formal',
          'openUrlAction': {
            'url': 'https://www.growingtreebank.com',
          }
        },
      },
    ],
    'representative': {
    'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
    'displayName': 'Chatbot',
    'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-open-url.sh

Node.js

/**
 * This code sends a text mesage to the user with a suggestion action toopen a URL
 * and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with an open URL action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an open url action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com',
        text: 'Hello world!',
        suggestions: [
          {
            action: {
              text: 'Hello',
              postbackData: 'hello-formal',
              openUrlAction: {
                url: 'https://www.growingtreebank.com',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}


/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-open-url.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendSuggestedActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an open url action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Hello world!")
        .setFallback("Hello, world!\n\nSay \"Hello\" at https://www.growingtreebank.com")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Hello").setPostbackData("hello-formal")
                  .setOpenUrlAction(
                      new BusinessMessagesOpenUrlAction().setUrl("https://www.growingtreebank.com"))
              ))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendSuggestedActionSnippet.java

Python

"""This code sends a text mesage to the user with a suggestion action to open a URL.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#open_url_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesOpenUrlAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an open url action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Hello, world!',
    fallback='Hello, world!\n\nReply with \"Hello\" or \"Hi!\"',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Hello',
                postbackData='hello-formal',
                openUrlAction=BusinessMessagesOpenUrlAction(
                    url='https://www.growingtreebank.com'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-open-url.py

إجراء الاتصال

يقترح إجراء "الاتصال" رقم هاتف على المستخدم للاتصال به. عندما ينقر مستخدم على شريحة اقتراح إجراء الاتصال، يتم فتح تطبيق الاتصال التلقائي مع تعبئة رقم الهاتف المحدّد تلقائيًا.

يرسل الرمز التالي نصًا مع إجراء "الاتصال". للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى DialAction.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text mesage to the user with a suggestion action to dial
# a phone number and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Contact support for help with this issue.',
    'fallback': 'Give us a call at [phone].',
    'suggestions': [
      {
        'action': {
          'text': 'Call support',
          'postbackData': 'call-support',
          'dialAction': {
            'phoneNumber': '[phone]',
          }
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-suggested-action-dial.sh

Node.js

/**
 * This code sends a text mesage to the user with a suggestion action to dial
 * a phone number and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a dial suggested action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a dial action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Give us a call at [phone].',
        text: 'Contact support for help with this issue.',
        suggestions: [
          {
            action: {
              text: 'Call support',
              postbackData: 'call-support',
              dialAction: {
                phoneNumber: '[phone]',
              },
            },
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-suggested-action-dial.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendDialActionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a dial action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Contact support for help with this issue.")
        .setFallback("Give us a call at [phone].")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
              .setAction(new BusinessMessagesSuggestedAction()
                  .setText("Call support").setPostbackData("call-support")
                  .setDialAction(
                      new BusinessMessagesDialAction().setPhoneNumber("[phone]"))
              )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendDialActionSnippet.java

Python

"""Sends a text mesage to the user with a suggestion action to dial a phone number.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#dial_action

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesDialAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedAction
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with a dial action and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Contact support for help with this issue.',
    fallback='Give us a call at [phone].',
    suggestions=[
        BusinessMessagesSuggestion(
            action=BusinessMessagesSuggestedAction(
                text='Call support',
                postbackData='call-support',
                dialAction=BusinessMessagesDialAction(
                    phoneNumber='[phone]'))
            ),
        ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-suggested-action-dial.py

اقتراح طلب المصادقة

يقوم اقتراح طلب المصادقة بتوجيه المستخدمين لتسجيل الدخول إلى تطبيق متوافق مع بروتوكول OAuth 2.0، مع تمرير رموز المصادقة لتأكيد بيانات الحساب وإتاحة تجارب مخصّصة للمستخدمين وسير محادثات مفصّل. اطّلِع على المصادقة باستخدام بروتوكول OAuth.

مثال

ترسل التعليمات البرمجية التالية نصًا يتضمّن اقتراحًا لطلب مصادقة. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى conversations.messages.create وSuggestion.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with an authentication request suggestion
# that allows the user to authenticate with OAuth. It also has a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json
# Replace the __CLIENT_ID__
# Replace the __CODE_CHALLENGE__
# Replace the __SCOPE__

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Sign in to continue the conversation.',
    'fallback': 'Visit support.growingtreebank.com to continue.',
    'suggestions': [
      {
        'authenticationRequest': {
          'oauth': {
            'clientId': '__CLIENT_ID__',
            'codeChallenge': '__CODE_CHALLENGE__',
            'scopes': [
              '__SCOPE__',
            ],
          },
        },
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    }
  }"
send-message-authentication-request-suggestion.sh

Node.js

/**
 * This code sends a text message to the user with an authentication request suggestion
 * that allows the user to authenticate with OAuth. It also has a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Before continuing, learn more about the prerequisites for authenticating
 * with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en
 *
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';
const OAUTH_CLIENT_ID = 'EDIT_HERE';
const OAUTH_CODE_CHALLENGE = 'EDIT_HERE';
const OAUTH_SCOPE = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message to the Business Messages API along with an authentication request.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with an authentication request
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Visit support.growingtreebank.com to continue.',
        text: 'Sign in to continue the conversation.',
        suggestions: [
          {
            authenticationRequest: {
              oauth: {
                clientId: OAUTH_CLIENT_ID,
                codeChallenge: OAUTH_CODE_CHALLENGE,
                scopes: [OAUTH_SCOPE]
              }
            }
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-authentication-request-suggestion.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendAuthenticationRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with an authentication request
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setAuthenticationRequest(new BusinessMessagesAuthenticationRequest()
                .setOauth(new BusinessMessagesAuthenticationRequestOauth()
                    .setClientId("CLIENT_ID")
                    .setCodeChallenge("CODE_CHALLENGE")
                    .setScopes(Arrays.asList("SCOPE"))
                )))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendAuthenticationRequestSuggestionSnippet.java

Python

"""Sends a text message to the user with an authentication request suggestion.

It allows the user to authenticate with OAuth and has a fallback text.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#authentication-request-suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesAuthenticationRequestOauth
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Before continuing, learn more about the prerequisites for authenticating
# with OAuth at: https://developers.google.com/business-communications/business-messages/guides/how-to/integrate/oauth?hl=en

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'
oauth_client_id = 'EDIT_HERE'
oauth_code_challenge = 'EDIT_HERE'
oauth_scope = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a text message with an authentication request
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    text='Sign in to continue the conversation.',
    fallback='Visit support.growingtreebank.com to continue.',
    suggestions=[
        BusinessMessagesSuggestion(
            authenticationRequest=BusinessMessagesAuthenticationRequest(
                oauth=BusinessMessagesAuthenticationRequestOauth(
                    clientId=oauth_client_id,
                    codeChallenge=oauth_code_challenge,
                    scopes=[oauth_scope])
                )
            ),
        ]
    )

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-authentication-request-suggestion.py

اقتراح طلب التحدث مع موظّف دعم يقدّم خدمة مباشرة

تتيح لك ميزة "اقتراح طلب التحدث مع وكيل مباشر" توجيه المستخدمين للتفاعل مع ممثلين بشريين أثناء التفاعلات المعقّدة أو عندما لا تتمكّن الأتمتة من التعامل مع طلب المستخدم.

ملاحظة: لإرسال اقتراحات طلبات التحدث مع موظف دعم مباشر، يجب تحديد مدى توفّر المراسلة لكل من BOT وHUMAN لموظف الدعم. اطّلِع على ضبط إعدادات توفّر المراسلة.

يمكن للمستخدمين طلب التحدث مع وكيل مباشر في أي وقت أثناء المحادثة من قائمة الخيارات الإضافية. يقدّم هذا الاقتراح طريقة للموظفين لاقتراح تفاعلات مع ممثلين بشريين بشكل آلي استنادًا إلى سياق المحادثة. يجب أن يكون الوكيل جاهزًا دائمًا للرد على حدث Live agent requested، حتى إذا لم يرسل اقتراحًا بطلب Live agent.

عندما ينقر المستخدمون على اقتراح طلب التحدّث مع موظّف دعم يقدّم خدمة مباشرة، يتم تشغيل حدث Live agent requested.

مثال

يرسل الرمز التالي نصًا يتضمّن اقتراحًا بطلب مراسلة أحد موظفي الدعم مباشرةً. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى conversations.messages.create وSuggestion.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a text message to the user with a Live agent request suggestion
# that allows the user to connect with a Live agent.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'text': 'Would you like to chat with a live agent?',
    'fallback': 'Would you like to chat with a live agent?',
    'suggestions': [
      {
        'liveAgentRequest': {},
      },
    ],
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
  }"
send-message-live-agent-request-suggestion.sh

Node.js

/**
 * This code sends a text message to the user with a Live agent request suggestion
 * that allows the user to connect with a Live agent.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a message with a live agent request action to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 */
 async function sendMessage(conversationId) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a message along with a request for live agent action
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: 'BOT', // Must be sent from a BOT representative
        },
        fallback: 'Would you like to chat with a live agent?',
        text: 'Would you like to chat with a live agent?',
        suggestions: [
          {
            liveAgentRequest: {}
          },
        ],
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID);
send-message-live-agent-request-suggestion.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendLiveAgentRequestSuggestionSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a text message with a live request action
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setText("Would you like to chat with a live agent?")
        .setFallback("Would you like to chat with a live agent?")
        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
            .setLiveAgentRequest(new BusinessMessagesLiveAgentRequest()))
        )
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("BOT")); // Must be sent from a BOT representative

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendLiveAgentRequestSuggestionSnippet.java

Python

"""Sends a text message to the user with a Live agent request suggestion.

It allows the user to connect with a Live agent.
Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesLiveAgentRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

# Create a text message with a live agent request action and fallback text
# Follow instructions at https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#live_agent_request_suggestion
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(  # Must be sent from a BOT representative
        representativeType=BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
    ),
    text='Would you like to chat with a live agent?',
    fallback='Would you like to chat with a live agent?',
    suggestions=[
        BusinessMessagesSuggestion(
            liveAgentRequest=BusinessMessagesLiveAgentRequest()
        )
    ])

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-live-agent-request-suggestion.py

البطاقات التفاعلية

عندما تحتاج إلى إرسال مجموعة من المعلومات أو الوسائط أو الاقتراحات ذات الصلة، عليك إرسال بطاقة تفاعلية. تسمح البطاقات التفاعلية المتقدّمة لبرنامج الدردشة الآلي بإرسال وحدات متعددة من المعلومات في رسالة واحدة.

يمكن أن تحتوي البطاقات التفاعلية على العناصر التالية:

• الوسائط (JPG أو JPEG أو PNG، الحد الأقصى 5 ميغابايت)
• صورة مصغّرة للوسائط (JPG أو JPEG أو PNG، الحد الأقصى 25 كيلوبايت)
• العنوان (200 حرف كحد أقصى)
• الوصف (2,000 حرف كحدّ أقصى)
• قائمة بالردود المقترَحة والإجراءات المقترَحة (4 كحد أقصى)

يمكن أن تحتوي البطاقة التفاعلية على أي من العناصر المدرَجة أو جميعها، ولكن يجب أن تحتوي البطاقة على وسائط أو عنوان واحد على الأقل لتكون صالحة. يمكن أن تحتوي البطاقة التفاعلية على أربعة إجراءات مقترَحة وردود مقترَحة كحد أقصى.

يمكن أن يرسل وكيلك عدة بطاقات تفاعلية معًا في حزمة بطاقات تفاعلية.

مثال

ترسل التعليمات البرمجية التالية بطاقة تفاعلية تتضمّن صورة وردودًا مقترَحة. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الرجوع إلى conversations.messages.create وRichCard.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends a rich card to the user with a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    'richCard': {
      'standaloneCard': {
        'cardContent': {
          'title': 'Hello, world!',
          'description': 'Sent with Business Messages.',
          'media': {
            'height': 'TALL',
            'contentInfo':{
              'altText': 'Google logo',
              'fileUrl': 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
              'forceRefresh': 'false'
            }
          },
          'suggestions': [
            {
              'reply': {
                'text': 'Suggestion #1',
                'postbackData': 'suggestion_1'
              }
            },
            {
              'reply': {
                'text': 'Suggestion #2',
                'postbackData': 'suggestion_2'
              }
            }
          ]
        }
      }
    }
  }"
send-message-rich-card.sh

Node.js

/**
 * This code sends a rich card to the user with a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a rich card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending a rich card message with two suggested replies
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
        richCard: {
          standaloneCard: {
            cardContent: {
              title: 'Hello, world!',
              description: 'Sent with Business Messages.',
              media: {
                height: 'TALL',
                contentInfo: {
                  altText: 'Google logo',
                  fileUrl: 'https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                  forceRefresh: false,
                },
              },
              suggestions: [
                {
                  reply: {
                    text: 'Suggestion #1',
                    postbackData: 'suggestion_1',
                  },
                },
                {
                  reply: {
                    text: 'Suggestion #2',
                    postbackData: 'suggestion_2',
                  },
                },
              ],
            },
          },
        },
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardMessageSnippet {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setStandaloneCard(new BusinessMessagesStandaloneCard()
                .setCardContent(
                    new BusinessMessagesCardContent()
                        .setTitle("Hello, world!")
                        .setDescription("Sent with Business Messages.")
                        .setSuggestions(Arrays.asList(
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #1").setPostbackData("suggestion_1")
                                ),
                            new BusinessMessagesSuggestion()
                                .setReply(new BusinessMessagesSuggestedReply()
                                    .setText("Suggestion #2").setPostbackData("suggestion_2")
                                ))
                        )
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(
                                new BusinessMessagesContentInfo()
                                    .setAltText("Google logo")
                                    .setFileUrl("https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png")
                                    .setForceRefresh(false)
                            ))
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardMessageSnippet.java

Python

"""This code sends a rich card to the user with a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-cards

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesStandaloneCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a rich card message with two suggested replies and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"',
    richCard=BusinessMessagesRichCard(
        standaloneCard=BusinessMessagesStandaloneCard(
            cardContent=BusinessMessagesCardContent(
                title='Hello, world!',
                description='Sent with Business Messages.',
                suggestions=[
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #1',
                            postbackData='suggestion_1')
                        ),
                    BusinessMessagesSuggestion(
                        reply=BusinessMessagesSuggestedReply(
                            text='Suggestion #2',
                            postbackData='suggestion_2')
                        )
                ],
                media=BusinessMessagesMedia(
                    height=BusinessMessagesMedia.HeightValueValuesEnum.TALL,
                    contentInfo=BusinessMessagesContentInfo(
                        altText='Google logo',
                        fileUrl='https://www.google.com/images/branding/googlelogo/2x/googlelogo_color_272x92dp.png',
                        forceRefresh=False
                    ))
                ))))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card.py

لوحات العرض الدوّارة للبطاقات التفاعلية

عندما تحتاج إلى عرض خيارات متعدّدة للمستخدم ليختار من بينها، استخدِم لوحة عرض دوّارة لبطاقة تفاعلية. تجمع لوحات العرض الدوّارة بين عدة بطاقات غنية بصريًا، ما يتيح للمستخدمين مقارنة العناصر والتفاعل مع كل عنصر على حدة.

يمكن أن تحتوي لوحات العرض الدوّارة على بطاقتَين من البطاقات التفاعلية كحدّ أدنى و10 بطاقات كحدّ أقصى. يجب أن تتوافق البطاقات الغنية بصريًا ضمن لوحات العرض الدوّارة مع المتطلبات العامة للبطاقات الغنية بصريًا من حيث المحتوى والارتفاع.

مثال

يرسل الرمز التالي مجموعة بطاقات تفاعلية. للاطّلاع على خيارات التنسيق والقيمة، يُرجى الاطّلاع على conversations.messages.create وRichCard.

cURL

# Copyright 2021 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at

#     https://www.apache.org/licenses/LICENSE-2.0

# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# This code sends to the user a carousel with rich cards and a fallback text.
# Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

# Replace the __CONVERSATION_ID__ with a conversation id that you can send messages to
# Make sure a service account key file exists at ./service_account_key.json

curl -X POST "https://businessmessages.googleapis.com/v1/conversations/__CONVERSATION_ID__/messages" \
-H "Content-Type: application/json" \
-H "User-Agent: curl/business-messages" \
-H "$(oauth2l header --json ./service_account_key.json businessmessages)" \
-d "{
    'messageId': '$(uuidgen)',
    'representative': {
      'avatarImage': 'https://developers.google.com/identity/images/g-logo.png',
      'displayName': 'Chatbot',
      'representativeType': 'BOT'
    },
    'fallback': 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    'richCard': {
      'carouselCard': {
        'cardWidth': 'MEDIUM',
        'cardContents': [
          {
            'title': 'Card #1',
            'description': 'The description for card #1',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #1',
                  'postbackData': 'card_1'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                'forceRefresh': 'false',
              }
            }
          },
          {
            'title': 'Card #2',
            'description': 'The description for card #2',
            'suggestions': [
              {
                'reply': {
                  'text': 'Card #2',
                  'postbackData': 'card_2'
                }
              }
            ],
            'media': {
              'height': 'MEDIUM',
              'contentInfo': {
                'fileUrl': 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                'forceRefresh': 'false',
              }
            }
          }
        ]
      }
    }
  }"
send-message-rich-card-carousel.sh

Node.js

/**
 * This code sends to the user a carousel with rich cards and a fallback text.
 * Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels
 *
 * This code is based on the https://github.com/google-business-communications/nodejs-businessmessages Node.js
 * Business Messages client library.
 */

/**
 * Edit the values below:
 */
const PATH_TO_SERVICE_ACCOUNT_KEY = './service_account_key.json';
const CONVERSATION_ID = 'EDIT_HERE';

const businessmessages = require('businessmessages');
const uuidv4 = require('uuid').v4;
const {google} = require('googleapis');

// Initialize the Business Messages API
const bmApi = new businessmessages.businessmessages_v1.Businessmessages({});

// Set the scope that we need for the Business Messages API
const scopes = [
  'https://www.googleapis.com/auth/businessmessages',
];

// Set the private key to the service account file
const privatekey = require(PATH_TO_SERVICE_ACCOUNT_KEY);

/**
 * Posts a carousel card message to the Business Messages API.
 *
 * @param {string} conversationId The unique id for this user and agent.
 * @param {string} representativeType A value of BOT or HUMAN.
 */
async function sendMessage(conversationId, representativeType) {
  const authClient = await initCredentials();

  if (authClient) {
    // Create the payload for sending carousel message
    // with two cards and a suggested reply for each card
    const apiParams = {
      auth: authClient,
      parent: 'conversations/' + conversationId,
      resource: {
        messageId: uuidv4(),
        representative: {
          representativeType: representativeType,
        },
        fallback: 'Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
        richCard: {
          carouselCard: {
            cardWidth: 'MEDIUM',
            cardContents: [
              {
                title: 'Card #1',
                description: 'The description for card #1',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #1',
                      postbackData: 'card_1'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                    forceRefresh: 'false',
                  }
                }
              },
              {
                title: 'Card #2',
                description: 'The description for card #2',
                suggestions: [
                  {
                    reply: {
                      text: 'Card #2',
                      postbackData: 'card_2'
                    }
                  }
                ],
                media: {
                  height: 'MEDIUM',
                  contentInfo: {
                    fileUrl: 'https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                    forceRefresh: 'false',
                  }
                }
              }
            ]
          }
        }
      },
    };

    // Call the message create function using the
    // Business Messages client library
    bmApi.conversations.messages.create(apiParams,
      {auth: authClient}, (err, response) => {
      console.log(err);
      console.log(response);
    });
  }
  else {
    console.log('Authentication failure.');
  }
}

/**
 * Initializes the Google credentials for calling the
 * Business Messages API.
 */
 async function initCredentials() {
  // configure a JWT auth client
  const authClient = new google.auth.JWT(
    privatekey.client_email,
    null,
    privatekey.private_key,
    scopes,
  );

  return new Promise(function(resolve, reject) {
    // authenticate request
    authClient.authorize(function(err, tokens) {
      if (err) {
        reject(false);
      } else {
        resolve(authClient);
      }
    });
  });
}

sendMessage(CONVERSATION_ID, 'BOT');
send-message-rich-card-carousel.js

جافا

import com.google.api.client.googleapis.services.AbstractGoogleClientRequest;
import com.google.api.client.http.HttpBackOffUnsuccessfulResponseHandler;
import com.google.api.client.http.HttpRequest;
import com.google.api.client.googleapis.auth.oauth2.GoogleCredential;
import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.jackson2.JacksonFactory;
import com.google.api.client.util.ExponentialBackOff;
import com.google.api.services.businessmessages.v1.Businessmessages;
import com.google.api.services.businessmessages.v1.model.*;
import com.google.communications.businessmessages.v1.MediaHeight;
import java.io.FileInputStream;
import java.util.Arrays;
import java.util.UUID;

class SendRichCardCarouselMessage {
  /**
   * Initializes credentials used by the Business Messages API.
   */
  private static Businessmessages.Builder getBusinessMessagesBuilder() {
    Businessmessages.Builder builder = null;
    try {
      GoogleCredential credential = GoogleCredential
            .fromStream(new FileInputStream("PATH_TO_SERVICE_ACCOUNT_KEY"));

      credential = credential.createScoped(Arrays.asList(
            "https://www.googleapis.com/auth/businessmessages"));

      credential.refreshToken();

      HttpTransport httpTransport = GoogleNetHttpTransport.newTrustedTransport();
      JacksonFactory jsonFactory = JacksonFactory.getDefaultInstance();

      // Create instance of the Business Messages API
      builder = new Businessmessages
        .Builder(httpTransport, jsonFactory, null)
        .setApplicationName("Sample Application");

      // Set the API credentials and endpoint
      builder.setHttpRequestInitializer(credential);
    } catch (Exception e) {
      e.printStackTrace();
    }

    return builder;
  }

  public static void main(String args[]) {
    try {
      String conversationId = "CONVERSATION_ID";

      // Create client library reference
      Businessmessages.Builder builder = getBusinessMessagesBuilder();

      // Create a rich card with two suggested replies
      BusinessMessagesMessage message = new BusinessMessagesMessage()
        .setMessageId(UUID.randomUUID().toString())
        .setFallback("Hello, world!\nSent with Business Messages\n\nReply with \"Suggestion #1\" or \"Suggestion #2\"")
        .setRichCard(new BusinessMessagesRichCard()
            .setCarouselCard(new BusinessMessagesCarouselCard().setCardWidth("MEDIUM")
                .setCardContents(Arrays.asList(
                    new BusinessMessagesCardContent()
                        .setTitle("Card #1")
                        .setDescription("The description for card #1")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #1").setPostbackData("card_1")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg"))),
                    new BusinessMessagesCardContent()
                        .setTitle("Card #2")
                        .setDescription("The description for card #2")
                        .setSuggestions(Arrays.asList(new BusinessMessagesSuggestion()
                            .setReply(new BusinessMessagesSuggestedReply()
                                .setText("Card #2").setPostbackData("card_2")
                            )))
                        .setMedia(new BusinessMessagesMedia()
                            .setHeight(MediaHeight.MEDIUM.toString())
                            .setContentInfo(new BusinessMessagesContentInfo()
                                .setFileUrl("https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg")))
                    )
                )))
        .setRepresentative(new BusinessMessagesRepresentative()
          .setRepresentativeType("TYPE"));

      // Create message request
      Businessmessages.Conversations.Messages.Create messageRequest
        = builder.build().conversations().messages()
          .create("conversations/" + conversationId, message);

      // Setup retries with exponential backoff
      HttpRequest httpRequest =
          ((AbstractGoogleClientRequest) messageRequest).buildHttpRequest();

      httpRequest.setUnsuccessfulResponseHandler(new
          HttpBackOffUnsuccessfulResponseHandler(
          new ExponentialBackOff()));

      // Execute request
      httpRequest.execute();
    } catch (Exception e) {
      e.printStackTrace();
    }
  }
}
SendRichCardCarouselMessage.java

Python

"""This code sends to the user a carousel with rich cards and a fallback text.

Read more: https://developers.google.com/business-communications/business-messages/guides/how-to/message/send?hl=en#rich-card-carousels

This code is based on the https://github.com/google-business-communications/python-businessmessages
Python Business Messages client library.
"""

import uuid

from businessmessages import businessmessages_v1_client as bm_client
from businessmessages.businessmessages_v1_messages import BusinessMessagesCardContent
from businessmessages.businessmessages_v1_messages import BusinessMessagesCarouselCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesContentInfo
from businessmessages.businessmessages_v1_messages import BusinessmessagesConversationsMessagesCreateRequest
from businessmessages.businessmessages_v1_messages import BusinessMessagesMedia
from businessmessages.businessmessages_v1_messages import BusinessMessagesMessage
from businessmessages.businessmessages_v1_messages import BusinessMessagesRepresentative
from businessmessages.businessmessages_v1_messages import BusinessMessagesRichCard
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestedReply
from businessmessages.businessmessages_v1_messages import BusinessMessagesSuggestion
from oauth2client.service_account import ServiceAccountCredentials

# Edit the values below:
path_to_service_account_key = './service_account_key.json'
conversation_id = 'EDIT_HERE'

credentials = ServiceAccountCredentials.from_json_keyfile_name(
    path_to_service_account_key,
    scopes=['https://www.googleapis.com/auth/businessmessages'])

client = bm_client.BusinessmessagesV1(credentials=credentials)

representative_type_as_string = 'BOT'
if representative_type_as_string == 'BOT':
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.BOT
else:
  representative_type = BusinessMessagesRepresentative.RepresentativeTypeValueValuesEnum.HUMAN

# Create a carousel message with two cards and a suggested reply for each card
# and fallback text
message = BusinessMessagesMessage(
    messageId=str(uuid.uuid4().int),
    representative=BusinessMessagesRepresentative(
        representativeType=representative_type
    ),
    fallback='Card #1\nThe description for card #1\n\nCard #2\nThe description for card #2\n\nReply with \"Card #1\" or \"Card #2\"',
    richCard=BusinessMessagesRichCard(
        carouselCard=BusinessMessagesCarouselCard(
            cardWidth=BusinessMessagesCarouselCard.CardWidthValueValuesEnum.MEDIUM,
            cardContents=[
                BusinessMessagesCardContent(
                    title='Card #1',
                    description='The description for card #1',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #1',
                                postbackData='card_1')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/cute-dog.jpg',
                            forceRefresh=False))),
                BusinessMessagesCardContent(
                    title='Card #2',
                    description='The description for card #2',
                    suggestions=[
                        BusinessMessagesSuggestion(
                            reply=BusinessMessagesSuggestedReply(
                                text='Card #2',
                                postbackData='card_2')
                            )
                    ],
                    media=BusinessMessagesMedia(
                        height=BusinessMessagesMedia.HeightValueValuesEnum.MEDIUM,
                        contentInfo=BusinessMessagesContentInfo(
                            fileUrl='https://storage.googleapis.com/kitchen-sink-sample-images/elephant.jpg',
                            forceRefresh=False)))
            ])))

# Create the message request
create_request = BusinessmessagesConversationsMessagesCreateRequest(
    businessMessagesMessage=message,
    parent='conversations/' + conversation_id)

# Send the message
bm_client.BusinessmessagesV1.ConversationsMessagesService(
    client=client).Create(request=create_request)
send-message-rich-card-carousel.py