Interacting with the Map

The Google Maps Android API allows you to customize the way in which a user can interact with your map. You can decide which of the built in UI components will appear on the map, what gestures are allowed and how to respond to click events from your users.

UI controls

The Maps API offers built-in UI controls that are similar to those found in the Google Maps application on your Android phone. You can toggle the visibility of these controls using the UiSettings class which can be obtained from a GoogleMap with the GoogleMap.getUiSettings method. Changes made on this class are immediately reflected on the map. To see an example of these features, look at the UI Settings demo activity in the sample application.

You can also configure most of these options when the map is created either via XML attributes or using the GoogleMapOptions class. See Configuring initial state for more details.

Each UI control has a pre-determined position relative to the edge of the map. You can move the controls away from the top, bottom, left or right edge by adding padding to the GoogleMap object.

Zoom controls

The Maps API provides built-in zoom controls that appear in the bottom right hand corner of the map. These are disabled by default, but can be enabled by calling UiSettings.setZoomControlsEnabled(true).

Zoom Controls


The Maps API provides a compass graphic which appears in the top left corner of the map under certain circumstances. The compass will only ever appear when the camera is oriented such that it has a non-zero bearing or non-zero tilt. When the user clicks on the compass, the camera animates back to a position with bearing and tilt of zero (the default orientation) and the compass fades away shortly afterwards. You can disable the compass appearing altogether by calling UiSettings.setCompassEnabled(boolean). However, you cannot force the compass to always be shown.


My Location button

The My Location button appears in the top right corner of the screen only when the My Location layer is enabled. For details, see the guide to location data.

My Location button

Level picker

By default, a level picker (floor picker) appears near the center right-hand edge of the screen when the user is viewing an indoor map. When two or more indoor maps are visible the level picker will apply to the building that is currently in focus, which is typically the one nearest the center of the screen. Each building has a default level which will be selected when the picker is first displayed. Users can choose a different level by selecting it from the picker.

You can disable or enable the level picker control by calling GoogleMap.getUiSettings().setIndoorLevelPickerEnabled(boolean).

This is useful if you want to replace the default level picker with your own.

Level picker

Map toolbar

By default, a toolbar appears at the bottom right of the map when a user taps a marker. The toolbar gives the user quick access to the Google Maps mobile app.

You can enable and disable the toolbar by calling UiSettings.setMapToolbarEnabled(boolean).

In a lite-mode map, the toolbar persists independently of the user's actions. In a fully-interactive map, the toolbar slides in when the user taps a marker and slides out again when the marker is no longer in focus.

The toolbar displays icons that provide access to a map view or directions request in the Google Maps mobile app. When a user taps an icon on the toolbar, the API builds an intent to launch the corresponding activity in the Google Maps mobile app.

The toolbar at bottom right.

The toolbar is visible at bottom right of the map in the above screenshot. Zero, one or both of the intent icons will appear on the map, depending on the content of the map and provided that the Google Maps mobile app supports the resulting intent.

Map gestures

A map created with the Google Maps Android API supports the same gestures as the Google Maps application. However, there might be situations where you want to disable certain gestures in order to preserve the state of the map. Zoom, pan, tilt and bearing can also be set programmatically - see Changing the View for more details. Note that disabling gestures does not affect whether you can change the camera position programmatically.

Like the UI controls, you can enable/disable gestures with the UiSettings class which can be obtained from a GoogleMap by calling GoogleMap.getUiSettings. Changes made on this class are immediately reflected on the map. To see an example of these features, look at the UI Settings demo activity in the sample application (see here for how to install it).

You can also configure these options when the map is created either via XML Attributes or using the GoogleMapOptions class. See Configuring the map for more details.

Zoom gestures

The map responds to a variety of gestures that can change the zoom level of the camera:

  • Double tap to increase the zoom level by 1 (zoom in).
  • Two finger tap to decrease the zoom level by 1 (zoom out).
  • Two finger pinch/stretch
  • One finger zooming by double tapping but not releasing on the second tap, and then sliding the finger up to zoom out, or down to zoom in.

You can disable zoom gestures by calling UiSettings.setZoomGesturesEnabled(boolean). This will not affect whether a user can use the zoom controls to zoom in and out.

Scroll (pan) gestures

A user can scroll (pan) around the map by dragging the map with their finger. You can disable scrolling by calling UiSettings.setScrollGesturesEnabled(boolean).

Tilt gestures

A user can tilt the map by placing two fingers on the map and moving them down or up together to increase or decrease the tilt angle respectively. You can disable tilt gestures by calling UiSettings.setTiltGesturesEnabled(boolean).

Rotate gestures

A user can rotate the map by placing two fingers on the map and applying a rotate motion. You can disable rotation by calling UiSettings.setRotateGesturesEnabled(boolean).

Map events

The Maps API also allows you to listen to events on the map. To see a simple example of these features, look at the Events demo activity in the sample application (see the instructions for how to install it).

Map click/long click events

If you want to respond to a user tapping on a point on the map, you can use an OnMapClickListener which you can set on the map by calling GoogleMap.setOnMapClickListener(OnMapClickListener). When a user clicks (taps) somewhere on the map, you will receive an onMapClick(LatLng) event that indicates the location on the map that the user clicked. Note that if you need the corresponding location on the screen (in pixels), you can obtain a Projection from the map which allows you to convert between latitude/longitude coordinates and screen pixel coordinates.

You can also listen for long click events with an OnMapLongClickListener which you can set on the map by calling GoogleMap.setOnMapLongClickListener(OnMapLongClickListener). This listener behaves similarly to the click listener and will be notified on long click events with an onMapLongClick(LatLng) callback.

Disabling click events in lite mode

To disable click events on a map in lite mode, call setClickable() on the view that contains the MapView or MapFragment. This is useful, for example, when displaying a map or maps in a list view, where you want the click event to invoke an action unrelated to the map.

The option to disable click events is available in lite mode only. Disabling click events will also make markers non-clickable. It will not affect other controls on the map.

For a MapView:

MapView view;

For a MapFragment:

MapFragment fragment;

Camera change events

If you want to keep track of the camera position, you can use an OnCameraChangeListener which is set on the map by calling GoogleMap.setOnCameraChangeListener(OnCameraChangeListener). The listener will be notified when the camera changes with an onCameraChange(CameraPosition) callback. You can then obtain the target (latitude/longitude), zoom, bearing and tilt of the camera - see the developer guide for camera position for more details on these properties. This callback is guaranteed to be called at the end of every animation but may not be called for intermediate frames.

Indoor map events

You can use events to find and customize the active level of an indoor map. Use the OnIndoorStateChangeListener interface to set a listener to be called when either a new building is focused or a new level is activated in a building.

Get the building that is currently in focus by calling GoogleMap.getFocusedBuilding(). Centering the map on a specific lat/long will generally give you the building at that lat/long, but this is not guaranteed.

You can then find the currently active level by calling IndoorBuilding.getActiveLevelIndex().

IndoorBuilding building = mMap.getFocusedBuilding();
if (building == null) {
  return null;
return building.getLevels().get(building.getActiveLevelIndex());

This is useful if you want to show custom markup for the active level, such as markers, ground overlays, tile overlays, polygons, polylines, and other shapes.

Hint: To go back to street level, get the default level via IndoorBuilding.getDefaultLevelIndex(), and set it as the active level via IndoorLevel.activate().

Send feedback about...

Google Maps Android API
Need help? Visit our support page.