Changing the View
The Google Maps Android API allows you to change the user's viewpoint of the map by modifying the map's camera.
The maps in the Google Maps Android API v2 can be tilted and rotated with easy gestures, giving users the ability to adjust the map with an orientation that makes sense for them. At any zoom level, you can pan the map, or change its perspective with very little latency thanks to the smaller footprint of the vector-based map tiles.
Many cities, when viewed close up, will have 3D buildings visible, as viewable
in the below picture of Vancouver, Canada. You can disable the 3d buildings by
Changes to the camera will not make any changes to markers, overlays, or other graphics you've added, although you may want to change your additions to fit better with the new view.
Because you can listen for user gestures on the map, you can change the map in
response to user requests. For example, the callback method
OnMapClickListener.onMapClick() responds to a
single tap on the map. Because the method receives the latitude and longitude
of the tap location, you can respond by panning or zooming to that point.
Similar methods are available for responding to taps on a marker's bubble or
for responding to a drag gesture on a marker.
The rest of this topic describes how to make changes to the camera that will impact the zoom level, view port or perspective of the map.
Changing a Map's View
Like Google Maps on the web, the Google Maps Android API represents the world's surface (a sphere) on your device's screen (a flat plane) using the Mercator projection. In the east and west direction, the map is repeated infinitely as the world seamlessly wraps around on itself. In the north and south direction the map is limited to approximately 85 degrees north and 85 degrees south.
Note: A Mercator projection has a finite width longitudinally but an infinite height latitudinally. We "cut off" base map imagery utilizing the Mercator projection at approximately +/- 85 degrees to make the resulting map shape square, which allows easier logic for tile selection.
The Camera Position
The map view is modeled as a camera looking down on a flat plane. The position of the camera (and hence the rendering of the map) is specified by the following properties: target (latitude/longitude location), zoom, bearing and tilt.
The location of the center of the map. Locations are specified by latitude and longitude.
The zoom level of the camera determines the scale of the map. At larger zoom levels more detail can be seen on the screen, while at smaller zoom levels more of the world can be seen on the screen. At zoom level 0, the scale of the map is such that the entire world has a width of approximately 256dp (density-independent pixels).
Increasing the zoom level by 1 doubles the width of the world on the screen. Hence at zoom level N, the width of the world is approximately 256 * 2N dp, i.e., at zoom level 2, the whole world is approximately 1024dp wide. Note that the zoom level need not be an integer. The range of zoom levels permitted by the map depends on a number of factors including location, map type and screen size.
The following images show different zoom levels:
The direction in which a vertical line on the map points, measured in degrees clockwise from north. Someone driving a car often turns a road map to align it with their direction of travel, while hikers using a map and compass usually orient the map so that a vertical line is pointing north. The Maps API lets you change a map's alignment or bearing. For example, a bearing of 90 degrees results in a map where the upwards direction points due east.
Tilt (viewing angle)
The camera's position on an arc between directly over the map's center position and the surface of the Earth, measured in degrees from the nadir (the direction pointing directly below the camera). When you change the viewing angle, the map appears in perspective, with far-away features appearing smaller, and nearby features appearing larger. The following illustrations demonstrate this.
In the images below, the viewing angle is 0 degrees. The first image shows a schematic of this; position 1 is the camera position, and position 2 is the current map position. The resulting map is shown below it.
In the images below, the viewing angle is 45 degrees. Notice that the camera isn't tilted at 45 degrees; instead, it moves halfway along an arc between straight overhead (0 degrees) and the ground (90 degrees), to position 3. The camera is still pointing at the map's center point, but now the area represented by the line at position 4 is now visible.
The map in this screenshot is still centered on the same point as in the original map, but more features have appeared at the top of the map. As you increase the angle beyond 45 degrees, features between the camera and the map position appear proportionally larger, while features beyond the map position appear proportionally smaller, yielding a three-dimensional effect.
Moving the camera
The Maps API allows you to change what part of the world is visible on the map. This is achieved by changing the position of the camera (as opposed to moving the map).
When you change the camera, you have the option of animating the resulting camera movement. The animation interpolates between the current camera attributes and the new camera attributes. You can also control the duration of the animation.
To change the the position of the camera, you must specify where you want to
move the camera, using a
CameraUpdate. The Maps API
allows you to create many different types of
CameraUpdateFactory. The following options are available:
Changing zoom level
gives you a
CameraUpdate that changes the zoom level to the given value,
while keeping all other properties the same.
give you a
CameraUpdate that increases (or decreases, if the value is
negative) the zoom level by the given value. The latter fixes the given point
on the screen such that it remains at the same location (latitude/longitude)
and so it may change the location of the camera in order to achieve this.
Changing camera position
There are two convenience methods for the common position changes.
gives you a
CameraUpdate that changes the camera's latitude and longitude,
while preserving all other properties.
gives you a
CameraUpdate that changes the camera's
latitude, longitude and zoom, while preserving all other properties.
For full flexibility in changing the camera position, use
which gives you a
CameraUpdate that moves the camera to
the given position. A
CameraPosition can be obtained either directly, using
new CameraPosition() or with a
It's sometimes useful to move the camera such that an entire area of interest
is visible at the greatest possible zoom level. For example, if you're
displaying all of the gas stations within five miles of the user's current
position, you may want to move the camera such that they are all visible on
the screen. To do this, first calculate the
that you want to be visible on the screen. You can then use
CameraUpdateFactory.newLatLngBounds(LatLngBounds bounds, int padding) to
CameraUpdate that changes the camera position
such that the given
LatLngBounds fits entirely within the map, taking into
account the padding (in pixels) specified. The returned
that the gap (in pixels) between the given bounds and the edge of the map will
be at least as much as the specified padding. Note that the tilt and bearing
of the map will both be 0.
private GoogleMap mMap; // Create a LatLngBounds that includes Australia. private LatLngBounds AUSTRALIA = new LatLngBounds( new LatLng(-44, 113), new LatLng(-10, 154)); // Set the camera to the greatest possible zoom level that includes the // bounds mMap.moveCamera(CameraUpdateFactory.newLatLngBounds(AUSTRALIA, 0));
In some cases, you may wish to center your camera within a bounds instead of
including the extreme borders. For example, to center the camera on a country
while maintaining a constant zoom. In this case, you can use a similar method,
by creating a
LatLngBounds and using
CameraUpdateFactory.newLatLngZoom(LatLng latLng, float zoom) with the
getCenter() method. The getCenter() method will return the
geographic center of the
private GoogleMap mMap; private LatLngBounds AUSTRALIA = new LatLngBounds( new LatLng(-44, 113), new LatLng(-10, 154)); mMap.moveCamera(CameraUpdateFactory.newLatLngZoom(AUSTRALIA.getCenter(), 10));
An overload of the method,
newLatLngBounds(boundary, width, height,
padding) allows you to specify a width and height in pixels for a
rectangle, with the intention that these correspond to the dimensions of the
map. The rectangle is positioned such that its center is the same as that of
the map's view (so that if the dimensions specified are the same as those of
the map's view, then the rectangle coincides with the map's view). The
CameraUpdate will move the camera such that the specified
LatLngBounds are centered on screen within the given rectangle at the
greatest possible zoom level, taking into account the padding required.
Note: Only use the simpler method
to generate a
CameraUpdate if it is going to be used to move
the camera after the map has undergone layout. During layout, the API
calculates the display boundaries of the map which are needed to correctly
project the bounding box. In comparison, you can use the
CameraUpdate returned by the more complex method
newLatLngBounds(boundary, width, height, padding)
at any time, even before the map has undergone layout, because the API
calculates the display boundaries from the arguments that you pass.
CameraUpdateFactory.scrollBy(float, float) gives you a
changes the camera's latitude and longitude such that the map moves by the
specified number of pixels. A positive x value causes the camera to move to
the right, so that the map appears to have moved to the left. A positive y
value causes the camera to move down, so that the map appears to have moved
up. Conversely, negative x values cause the camera to move to the left, so
that the map appears to have moved right and negative y values cause the
camera to move up. The scrolling is relative to the camera's current
orientation. For example, if the camera has a bearing of 90 degrees, then east
Updating the Camera View
To apply a
CameraUpdate to the map, you can either move
the camera instantly or animate the camera smoothly. To move the camera
instantly with the given
CameraUpdate, you can call
You can make the user experience more pleasing, especially for short moves,
by animating the change. To do this instead of calling
The map will move smoothly to the new attributes. The most detailed form of this method,
GoogleMap.animateCamera(cameraUpdate, callback, duration),
offers three arguments:
CameraUpdatedescribing where to move the camera.
- An object that implements
GoogleMap.CancellableCallback. This generalized interface for handling tasks defines two methods `onCancel()` and `onFinished()`. For animation, the methods are called in the following circumstances:
- Desired duration of the animation, in milliseconds, as an `int`.
The following code snippets illustrate some of the common ways to move the camera using the Maps API.
private static final LatLng SYDNEY = new LatLng(-33.88,151.21); private static final LatLng MOUNTAIN_VIEW = new LatLng(37.4, -122.1); private GoogleMap map; ... // Obtain the map from a MapFragment or MapView. // Move the camera instantly to Sydney with a zoom of 15. map.moveCamera(CameraUpdateFactory.newLatLngZoom(SYDNEY, 15)); // Zoom in, animating the camera. map.animateCamera(CameraUpdateFactory.zoomIn()); // Zoom out to zoom level 10, animating with a duration of 2 seconds. map.animateCamera(CameraUpdateFactory.zoomTo(10), 2000, null); // Construct a CameraPosition focusing on Mountain View and animate the camera to that position. CameraPosition cameraPosition = new CameraPosition.Builder() .target(MOUNTAIN_VIEW) // Sets the center of the map to Mountain View .zoom(17) // Sets the zoom .bearing(90) // Sets the orientation of the camera to east .tilt(30) // Sets the tilt of the camera to 30 degrees .build(); // Creates a CameraPosition from the builder map.animateCamera(CameraUpdateFactory.newCameraPosition(cameraPosition));