Method jobs.reports.list

지정된 보고 작업에 대해 생성된 보고서를 나열합니다.

요청

HTTP 요청

GET https://youtubereporting.googleapis.com/v1/jobs/{jobId}/reports

승인

모든 YouTube Reporting API 요청은 승인을 받아야 합니다. 인증 가이드에서는 OAuth 2.0 프로토콜을 사용하여 인증 토큰을 검색하는 방법을 설명합니다.

YouTube Reporting API 요청에 사용되는 승인 범위는 다음과 같습니다.

범위
https://www.googleapis.com/auth/yt-analytics.readonly YouTube 콘텐츠에 관한 YouTube 분석 보고서를 조회합니다. 이 범위를 사용하여 사용자 활동 측정항목(예: 조회수, 평가 횟수)을 조회할 수 있습니다.
https://www.googleapis.com/auth/yt-analytics-monetary.readonly YouTube 콘텐츠에 대한 YouTube 분석 수익 보고서 보기 이 범위를 사용하면 사용자 활동 측정항목과 예상 수익, 광고 실적 측정항목에 액세스할 수 있습니다.

매개변수

경로 매개변수

매개변수
jobId string
YouTube가 보고서가 나열되는 작업을 고유하게 식별하는 데 사용하는 ID입니다.

쿼리 매개변수

매개변수
createdAfter timestamp
이 매개변수를 지정하면 API 응답에 백필된 데이터가 있는 새 보고서를 포함하여 지정된 날짜 및 시간 이후에 생성된 보고서만 포함되어야 함을 나타냅니다. 값은 반환된 데이터와 연결된 날짜가 아니라 보고서가 생성된 시간과 관련이 있습니다.

이 값은 RFC3339 UTC 'Zulu'의 타임스탬프입니다. 마이크로초 단위까지 정확해야 합니다. 예: "2015-10-02T15:01:23.045678Z".
onBehalfOfContentOwner string
API 요청이 이루어지는 콘텐츠 소유자의 ID입니다. 요청에서 이 매개변수에 대한 값을 지정하지 않으면 API 서버는 요청이 사용자 자신의 채널에 대해 작성되고 있다고 가정합니다.
pageSize number
요청된 페이지 크기입니다. 값을 지정하지 않으면 API 서버에서 적절한 기본값을 선택합니다.

서버는 요청된 수보다 적은 수의 보고서 유형을 반환할 수 있습니다.
pageToken string
서버가 반환해야 하는 결과 페이지를 식별하는 토큰입니다. 일반적으로 이전의 jobs.reports.list 메서드 호출에 대한 응답으로 반환된 nextPageToken 속성의 값입니다.
startTimeAtOrAfter timestamp
이 매개변수는 보고서의 최초 데이터가 지정된 날짜이거나 그 이후인 경우에만 API 응답에 보고서가 포함되어야 함을 나타냅니다. createdAfter 매개변수 값은 보고서가 생성된 시간과 관련이 있지만 이 날짜는 보고서의 데이터와 관련이 있습니다.

값은 RFC3339 UTC 'Zulu'의 타임스탬프입니다. 마이크로초 단위까지 정확해야 합니다. 예: "2015-10-02T15:01:23.045678Z".
startTimeBefore timestamp
이 매개변수는 보고서의 최초 데이터가 지정된 날짜 이전인 경우에만 API 응답에 보고서가 포함되어야 함을 나타냅니다. createdAfter 매개변수 값은 보고서가 생성된 시간과 관련이 있지만 이 날짜는 보고서의 데이터와 관련이 있습니다.

값은 RFC3339 UTC 'Zulu'의 타임스탬프입니다. 마이크로초 단위까지 정확해야 합니다. 예: "2015-10-02T15:01:23.045678Z".

요청 본문

요청 본문은 비어 있어야 합니다.

응답

성공할 경우 응답 본문에 다음 구조의 데이터가 포함됩니다.

{
  "reports": [
    Report resource
  ],
  "nextPageToken": string
}

지정된 작업이 없으면 이 메서드는 404 (NOT FOUND) HTTP 응답 코드를 반환합니다.

<ph type="x-smartling-placeholder">
</ph> <ph type="x-smartling-placeholder">
</ph> API 응답에 이 속성 값이 포함된 경우 지정된 작업에 대한 추가 보고서를 사용할 수 있습니다. 이러한 보고서를 가져오려면 pageToken 매개변수 값을 이 값으로 설정하여 추가 jobs.reports.list 요청을 제출하세요.
속성
reports[] list
지정된 jobId에 대해 생성된 보고서의 목록입니다. 목록의 각 항목은 report 리소스입니다.
nextPageToken string
결과의 다음 페이지를 검색하는 토큰입니다. 이후에 ListReports 메서드를 호출할 때 ListReportsRequest.page_token 필드에 이 값을 전달하여 결과의 다음 페이지를 검색합니다.

참고: 아래의 코드 샘플은 지원되는 일부 프로그래밍 언어를 나타내지 않을 수도 있습니다. 지원되는 언어 목록을 보려면 클라이언트 라이브러리 문서를 참조하세요.

자바

아래 샘플에서는 Java 클라이언트 라이브러리를 사용합니다.

이 샘플은 특정 작업으로 만든 보고서를 검색하는 방법을 보여줍니다. jobs.list 메서드를 호출하여 보고 작업을 검색합니다. 그런 다음 jobId 매개변수를 특정 작업 ID로 설정하고 reports.list 메서드를 호출하여 해당 작업에서 만든 보고서를 검색합니다. 마지막으로 샘플에서는 각 보고서의 다운로드 URL을 출력합니다.

/*
 * Copyright (c) 2015 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 * in compliance with the License. You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software distributed under the License
 * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
 * or implied. See the License for the specific language governing permissions and limitations under
 * the License.
 */

package com.google.api.services.samples.youtube.cmdline.reporting;

import com.google.api.client.auth.oauth2.Credential;
import com.google.api.client.googleapis.json.GoogleJsonResponseException;
import com.google.api.client.http.GenericUrl;
import com.google.api.services.samples.youtube.cmdline.Auth;
import com.google.api.services.youtubereporting.YouTubeReporting;
import com.google.api.services.youtubereporting.YouTubeReporting.Media.Download;
import com.google.api.services.youtubereporting.model.Job;
import com.google.api.services.youtubereporting.model.ListJobsResponse;
import com.google.api.services.youtubereporting.model.ListReportsResponse;
import com.google.api.services.youtubereporting.model.Report;

import com.google.common.collect.Lists;

import java.io.BufferedReader;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.List;

import javax.print.attribute.standard.Media;

/**
 * This sample retrieves reports created by a specific job by:
 *
 * 1. Listing the jobs using the "jobs.list" method.
 * 2. Retrieving reports using the "reports.list" method.
 *
 * @author Ibrahim Ulukaya
 */
public class RetrieveReports {

    /**
     * Define a global instance of a YouTube Reporting object, which will be used to make
     * YouTube Reporting API requests.
     */
    private static YouTubeReporting youtubeReporting;


    /**
     * Retrieve reports.
     *
     * @param args command line args (not used).
     */
    public static void main(String[] args) {

        /*
         * This OAuth 2.0 access scope allows for read access to the YouTube Analytics monetary reports for
         * authenticated user's account. Any request that retrieves earnings or ad performance metrics must
         * use this scope.
         */
        List<String> scopes = Lists.newArrayList("https://www.googleapis.com/auth/yt-analytics-monetary.readonly");

        try {
            // Authorize the request.
            Credential credential = Auth.authorize(scopes, "retrievereports");

            // This object is used to make YouTube Reporting API requests.
            youtubeReporting = new YouTubeReporting.Builder(Auth.HTTP_TRANSPORT, Auth.JSON_FACTORY, credential)
                    .setApplicationName("youtube-cmdline-retrievereports-sample").build();

            if (listReportingJobs()) {
              if(retrieveReports(getJobIdFromUser())) {
                downloadReport(getReportUrlFromUser());
              }
            }
        } catch (GoogleJsonResponseException e) {
            System.err.println("GoogleJsonResponseException code: " + e.getDetails().getCode()
                    + " : " + e.getDetails().getMessage());
            e.printStackTrace();

        } catch (IOException e) {
            System.err.println("IOException: " + e.getMessage());
            e.printStackTrace();
        } catch (Throwable t) {
            System.err.println("Throwable: " + t.getMessage());
            t.printStackTrace();
        }
    }

    /**
     * Lists reporting jobs. (jobs.listJobs)
     * @return true if at least one reporting job exists
     * @throws IOException
     */
    private static boolean listReportingJobs() throws IOException {
        // Call the YouTube Reporting API's jobs.list method to retrieve reporting jobs.
        ListJobsResponse jobsListResponse = youtubeReporting.jobs().list().execute();
        List<Job> jobsList = jobsListResponse.getJobs();

        if (jobsList == null || jobsList.isEmpty()) {
          System.out.println("No jobs found.");
          return false;
        } else {
            // Print information from the API response.
            System.out.println("\n================== Reporting Jobs ==================\n");
            for (Job job : jobsList) {
                System.out.println("  - Id: " + job.getId());
                System.out.println("  - Name: " + job.getName());
                System.out.println("  - Report Type Id: " + job.getReportTypeId());
                System.out.println("\n-------------------------------------------------------------\n");
            }
        }
        return true;
    }

    /**
     * Lists reports created by a specific job. (reports.listJobsReports)
     *
     * @param jobId The ID of the job.
     * @throws IOException
     */
    private static boolean retrieveReports(String jobId)
        throws IOException {
        // Call the YouTube Reporting API's reports.list method
        // to retrieve reports created by a job.
        ListReportsResponse reportsListResponse = youtubeReporting.jobs().reports().list(jobId).execute();
        List<Report> reportslist = reportsListResponse.getReports();

        if (reportslist == null || reportslist.isEmpty()) {
            System.out.println("No reports found.");
            return false;
        } else {
            // Print information from the API response.
            System.out.println("\n============= Reports for the job " + jobId + " =============\n");
            for (Report report : reportslist) {
                System.out.println("  - Id: " + report.getId());
                System.out.println("  - From: " + report.getStartTime());
                System.out.println("  - To: " + report.getEndTime());
                System.out.println("  - Download Url: " + report.getDownloadUrl());
                System.out.println("\n-------------------------------------------------------------\n");
            }
        }
        return true;
    }

    /**
     * Download the report specified by the URL. (media.download)
     *
     * @param reportUrl The URL of the report to be downloaded.
     * @throws IOException
     */
    private static boolean downloadReport(String reportUrl)
        throws IOException {
        // Call the YouTube Reporting API's media.download method to download a report.
        Download request = youtubeReporting.media().download("");
        FileOutputStream fop = new FileOutputStream(new File("report"));
        request.getMediaHttpDownloader().download(new GenericUrl(reportUrl), fop);
        return true;
    }

    /*
     * Prompt the user to enter a job id for report retrieval. Then return the id.
     */
    private static String getJobIdFromUser() throws IOException {

        String id = "";

        System.out.print("Please enter the job id for the report retrieval: ");
        BufferedReader bReader = new BufferedReader(new InputStreamReader(System.in));
        id = bReader.readLine();

        System.out.println("You chose " + id + " as the job Id for the report retrieval.");
        return id;
    }

    /*
     * Prompt the user to enter a URL for report download. Then return the URL.
     */
    private static String getReportUrlFromUser() throws IOException {

        String url = "";

        System.out.print("Please enter the report URL to download: ");
        BufferedReader bReader = new BufferedReader(new InputStreamReader(System.in));
        url = bReader.readLine();

        System.out.println("You chose " + url + " as the URL to download.");
        return url;
    }}

PHP

아래 샘플에서는 PHP 클라이언트 라이브러리를 사용합니다.

이 샘플은 특정 작업으로 만든 보고서를 검색하는 방법을 보여줍니다. jobs.list 메서드를 호출하여 보고 작업을 검색합니다. 그런 다음 jobId 매개변수를 특정 작업 ID로 설정하고 reports.list 메서드를 호출하여 해당 작업에서 만든 보고서를 검색합니다. 마지막으로 샘플에서는 각 보고서의 다운로드 URL을 출력합니다.

<?php

/**
 * This sample supports the following use cases:
 *
 * 1. Retrieve reporting jobs by content owner:
 *    Ex: php retrieve_reports.php  --contentOwner=="CONTENT_OWNER_ID"
 *    Ex: php retrieve_reports.php  --contentOwner=="CONTENT_OWNER_ID" --includeSystemManaged==True
 * 2. Retrieving list of downloadable reports for a particular job:
 *    Ex: php retrieve_reports.php  --contentOwner=="CONTENT_OWNER_ID" --jobId="JOB_ID"
 * 3. Download a report:
 *    Ex: php retrieve_reports.php  --contentOwner=="CONTENT_OWNER_ID" --downloadUrl="DOWNLOAD_URL" --outputFile="report.txt"
 */

/**
 * Library Requirements
 *
 * 1. Install composer (https://getcomposer.org)
 * 2. On the command line, change to this directory (api-samples/php)
 * 3. Require the google/apiclient library
 *    $ composer require google/apiclient:~2.0
 */
if (!file_exists(__DIR__ . '/vendor/autoload.php')) {
  throw new \Exception('please run "composer require google/apiclient:~2.2.0" in "' . __DIR__ .'"');
}

require_once __DIR__ . '/vendor/autoload.php';
session_start();


define('CREDENTIALS_PATH', '~/.credentials/youtube-php.json');

$longOptions = array(
  'contentOwner::',
  'downloadUrl::',
  'includeSystemManaged::',
  'jobId::',
  'outputFile::',
);

$options = getopt('', $longOptions);

$CONTENT_OWNER_ID = ($options['contentOwner'] ? $options['contentOwner'] : '');
$DOWNLOAD_URL = (array_key_exists('downloadUrl', $options) ?
                 $options['downloadUrl'] : '');
$INCLUDE_SYSTEM_MANAGED = (array_key_exists('includeSystemManaged', $options) ?
                           $options['includeSystemManaged'] : '');
$JOB_ID = (array_key_exists('jobId', $options) ? $options['jobId'] : '');
$OUTPUT_FILE = (array_key_exists('outputFile', $options) ?
                $options['outputFile'] : '');

/*
 * You can obtain an OAuth 2.0 client ID and client secret from the
 * {{ Google Cloud Console }} <{{ https://cloud.google.com/console }}>
 * For more information about using OAuth 2.0 to access Google APIs, please see:
 * <https://developers.google.com/youtube/v3/guides/authentication>
 * Please ensure that you have enabled the YouTube Data API for your project.
 */
function getClient() {
  $client = new Google_Client();
  $client->setAuthConfigFile('client_secrets_php.json');
  $client->addScope(
      'https://www.googleapis.com/auth/yt-analytics-monetary.readonly');
  $client->setRedirectUri('urn:ietf:wg:oauth:2.0:oob');
  $client->setAccessType('offline');

  // Load previously authorized credentials from a file.
  $credentialsPath = expandHomeDirectory(CREDENTIALS_PATH);
  if (file_exists($credentialsPath)) {
    $accessToken = json_decode(file_get_contents($credentialsPath), true);
  } else {
    // Request authorization from the user.
    $authUrl = $client->createAuthUrl();
    printf('Open the following link in your browser:\n%s\n', $authUrl);
    print 'Enter verification code: ';
    $authCode = trim(fgets(STDIN));

    // Exchange authorization code for an access token.
    $accessToken = $client->authenticate($authCode);
    $refreshToken = $client->getRefreshToken();

    // Store the credentials to disk.
    if(!file_exists(dirname($credentialsPath))) {
      mkdir(dirname($credentialsPath), 0700, true);
    }
    file_put_contents($credentialsPath, json_encode($accessToken));
    printf('Credentials saved to %s\n', $credentialsPath);

    //fclose($fp);
  }
  $client->setAccessToken($accessToken);

  // Refresh the token if it's expired.
  if ($client->isAccessTokenExpired()) {
    $client->fetchAccessTokenWithRefreshToken($client->getRefreshToken());
    file_put_contents($credentialsPath, json_encode($client->getAccessToken()));
  }

  return $client;
}

/**
 * Expands the home directory alias '~' to the full path.
 * @param string $path the path to expand.
 * @return string the expanded path.
 */
function expandHomeDirectory($path) {
  $homeDirectory = getenv('HOME');
  if (empty($homeDirectory)) {
    $homeDirectory = getenv('HOMEDRIVE') . getenv('HOMEPATH');
  }
  return str_replace('~', realpath($homeDirectory), $path);
}

/**
 * Returns a list of reporting jobs. (jobs.listJobs)
 *
 * @param Google_Service_YouTubereporting $youtubeReporting YouTube Reporting service object.
 * @param string $onBehalfOfContentOwner A content owner ID.
 */
function listReportingJobs(Google_Service_YouTubeReporting $youtubeReporting,
    $onBehalfOfContentOwner = '', $includeSystemManaged = False) {
  $reportingJobs = $youtubeReporting->jobs->listJobs(
      array('onBehalfOfContentOwner' => $onBehalfOfContentOwner,
            'includeSystemManaged' => $includeSystemManaged));
  print ('REPORTING JOBS' . PHP_EOL . '**************' . PHP_EOL);
  foreach ($reportingJobs as $job) {
    print($job['reportTypeId'] . ':' . $job['id'] . PHP_EOL);
  }
  print(PHP_EOL);
}

/**
 * Lists reports created by a specific job. (reports.listJobsReports)
 *
 * @param Google_Service_YouTubereporting $youtubeReporting YouTube Reporting service object.
 * @param string $jobId The ID of the job.
 * @param string $onBehalfOfContentOwner A content owner ID.
 */
function listReportsForJob(Google_Service_YouTubeReporting $youtubeReporting,
    $jobId, $onBehalfOfContentOwner = '') {
  $reports = $youtubeReporting->jobs_reports->listJobsReports($jobId,
      array('onBehalfOfContentOwner' => $onBehalfOfContentOwner));
  print ('DOWNLOADABLE REPORTS' . PHP_EOL . '********************' . PHP_EOL);
  foreach ($reports['reports'] as $report) {
    print('Created: ' . date('d M Y', strtotime($report['createTime'])) .
          ' (' . date('d M Y', strtotime($report['startTime'])) .
          ' to ' . date('d M Y', strtotime($report['endTime'])) . ')' .
          PHP_EOL .  '    ' . $report['downloadUrl'] . PHP_EOL . PHP_EOL);
  }
}

/**
 * Download the report specified by the URL. (media.download)
 *
 * @param Google_Service_YouTubereporting $youtubeReporting YouTube Reporting service object.
 * @param string $reportUrl The URL of the report to be downloaded.
 * @param string $outputFile The file to write the report to locally.
 * @param $htmlBody - html body.
 */
function downloadReport(Google_Service_YouTubeReporting $youtubeReporting,
    $reportUrl, $outputFile) {
  $client = $youtubeReporting->getClient();
  // Setting the defer flag to true tells the client to return a request that
  // can be called with ->execute(); instead of making the API call immediately.
  $client->setDefer(true);

  // Call YouTube Reporting API's media.download method to download a report.
  $request = $youtubeReporting->media->download('', array('alt' => 'media'));
  $request = $request->withUri(new \GuzzleHttp\Psr7\Uri($reportUrl));
  $responseBody = '';
  try {
    $response = $client->execute($request);
    $responseBody = $response->getBody();
  } catch (Google_Service_Exception $e) {
    $responseBody = $e->getTrace()[0]['args'][0]->getResponseBody();
  }
  file_put_contents($outputFile, $responseBody);
  $client->setDefer(false);
}

// Define an object that will be used to make all API requests.
$client = getClient();
// YouTube Reporting object used to make YouTube Reporting API requests.
$youtubeReporting = new Google_Service_YouTubeReporting($client);

if ($CONTENT_OWNER_ID) {
  if (!$DOWNLOAD_URL && !$JOB_ID) {
    listReportingJobs($youtubeReporting, $CONTENT_OWNER_ID,
                      $INCLUDE_SYSTEM_MANAGED);
  } else if ($JOB_ID) {
    listReportsForJob($youtubeReporting, $JOB_ID, $CONTENT_OWNER_ID);
  } else if ($DOWNLOAD_URL && $OUTPUT_FILE) {
    downloadReport($youtubeReporting, $DOWNLOAD_URL, $OUTPUT_FILE);
  }
}

?>

Python

아래 샘플에서는 Python 클라이언트 라이브러리를 사용합니다.

이 샘플은 특정 작업으로 만든 보고서를 검색하는 방법을 보여줍니다. jobs.list 메서드를 호출하여 보고 작업을 검색합니다. 그런 다음 jobId 매개변수를 특정 작업 ID로 설정하고 reports.list 메서드를 호출하여 해당 작업에서 만든 보고서를 가져옵니다. 마지막으로 샘플에서는 각 보고서의 다운로드 URL을 출력합니다.

#!/usr/bin/python

###
#
# This script retrieves YouTube Reporting API reports. Use cases:
# 1. If you specify a report URL, the script downloads that report.
# 2. Otherwise, if you specify a job ID, the script retrieves a list of
#    available reports for that job and prompts you to select a report.
#    Then it retrieves that report as in case 1.
# 3. Otherwise, the list retrieves a list of jobs for the user or,
#    if specified, the content owner that the user is acting on behalf of.
#    Then it prompts the user to select a job, and then executes case 2 and
#    then case 1.
# Usage examples:
# python retrieve_reports.py --content_owner_id=<CONTENT_OWNER_ID> --local_file=<LOCAL_FILE>
# python retrieve_reports.py --content_owner_id=<CONTENT_OWNER_ID> --job_id=<JOB_ID> --local_file=<LOCAL_FILE>
# python retrieve_reports.py --content_owner_id=<CONTENT_OWNER_ID> --report_url=<REPORT_URL> --local_file=<LOCAL_FILE>
#
###

import argparse
import os

import google.oauth2.credentials
import google_auth_oauthlib.flow
from googleapiclient.discovery import build
from googleapiclient.errors import HttpError
from googleapiclient.http import MediaIoBaseDownload
from google_auth_oauthlib.flow import InstalledAppFlow
from io import FileIO


# The CLIENT_SECRETS_FILE variable specifies the name of a file that contains
# the OAuth 2.0 information for this application, including its client_id and
# client_secret. You can acquire an OAuth 2.0 client ID and client secret from
# the {{ Google Cloud Console }} at
# {{ https://cloud.google.com/console }}.
# Please ensure that you have enabled the YouTube Data API for your project.
# For more information about using OAuth2 to access the YouTube Data API, see:
#   https://developers.google.com/youtube/v3/guides/authentication
# For more information about the client_secrets.json file format, see:
#   https://developers.google.com/api-client-library/python/guide/aaa_client_secrets
CLIENT_SECRETS_FILE = 'client_secret.json'

# This OAuth 2.0 access scope allows for read access to YouTube Analytics
# monetary reports for the authenticated user's account. Any request that
# retrieves earnings or ad performance metrics must use this scope.
SCOPES = ['https://www.googleapis.com/auth/yt-analytics-monetary.readonly']
API_SERVICE_NAME = 'youtubereporting'
API_VERSION = 'v1'

# Authorize the request and store authorization credentials.
def get_authenticated_service():
  flow = InstalledAppFlow.from_client_secrets_file(CLIENT_SECRETS_FILE, SCOPES)
  credentials = flow.run_console()
  return build(API_SERVICE_NAME, API_VERSION, credentials = credentials)

# Remove keyword arguments that are not set.
def remove_empty_kwargs(**kwargs):
  good_kwargs = {}
  if kwargs is not None:
    for key, value in kwargs.iteritems():
      if value:
        good_kwargs[key] = value
  return good_kwargs

# Call the YouTube Reporting API's jobs.list method to retrieve reporting jobs.
def list_reporting_jobs(youtube_reporting, **kwargs):
  # Only include the onBehalfOfContentOwner keyword argument if the user
  # set a value for the --content_owner argument.
  kwargs = remove_empty_kwargs(**kwargs)

  # Retrieve the reporting jobs for the user (or content owner).
  results = youtube_reporting.jobs().list(**kwargs).execute()

  if 'jobs' in results and results['jobs']:
    jobs = results['jobs']
    for job in jobs:
      print ('Reporting job id: %s\n name: %s\n for reporting type: %s\n'
        % (job['id'], job['name'], job['reportTypeId']))
  else:
    print 'No jobs found'
    return False

  return True

# Call the YouTube Reporting API's reports.list method to retrieve reports created by a job.
def retrieve_reports(youtube_reporting, **kwargs):
  # Only include the onBehalfOfContentOwner keyword argument if the user
  # set a value for the --content_owner argument.
  kwargs = remove_empty_kwargs(**kwargs)

  # Retrieve available reports for the selected job.
  results = youtube_reporting.jobs().reports().list(
    **kwargs
  ).execute()

  if 'reports' in results and results['reports']:
    reports = results['reports']
    for report in reports:
      print ('Report dates: %s to %s\n       download URL: %s\n'
        % (report['startTime'], report['endTime'], report['downloadUrl']))


# Call the YouTube Reporting API's media.download method to download the report.
def download_report(youtube_reporting, report_url, local_file):
  request = youtube_reporting.media().download(
    resourceName=' '
  )
  request.uri = report_url
  fh = FileIO(local_file, mode='wb')
  # Stream/download the report in a single request.
  downloader = MediaIoBaseDownload(fh, request, chunksize=-1)

  done = False
  while done is False:
    status, done = downloader.next_chunk()
    if status:
      print 'Download %d%%.' % int(status.progress() * 100)
  print 'Download Complete!'


# Prompt the user to select a job and return the specified ID.
def get_job_id_from_user():
  job_id = raw_input('Please enter the job id for the report retrieval: ')
  print ('You chose "%s" as the job Id for the report retrieval.' % job_id)
  return job_id

# Prompt the user to select a report URL and return the specified URL.
def get_report_url_from_user():
  report_url = raw_input('Please enter the report URL to download: ')
  print ('You chose "%s" to download.' % report_url)
  return report_url

if __name__ == '__main__':
  parser = argparse.ArgumentParser()
  parser.add_argument('--content_owner', default='',
      help='ID of content owner for which you are retrieving jobs and reports')
  parser.add_argument('--job_id', default=None,
      help='ID of the job for which you are retrieving reports. If not ' +
           'provided AND report_url is also not provided, then the script ' +
           'calls jobs.list() to retrieve a list of jobs.')
  parser.add_argument('--report_url', default=None,
      help='URL of the report to retrieve. If not specified, the script ' +
           'calls reports.list() to retrieve a list of reports for the ' +
           'selected job.')
  parser.add_argument('--local_file', default='yt_report.txt',
      help='The name of the local file where the downloaded report will be written.')
  args = parser.parse_args()

  youtube_reporting = get_authenticated_service()
  try:
    # If the user has not specified a job ID or report URL, retrieve a list
    # of available jobs and prompt the user to select one.
    if not args.job_id and not args.report_url:
      if list_reporting_jobs(youtube_reporting,
                             onBehalfOfContentOwner=args.content_owner):
        args.job_id = get_job_id_from_user()

    # If the user has not specified a report URL, retrieve a list of reports
    # available for the specified job and prompt the user to select one.
    if args.job_id and not args.report_url:
      retrieve_reports(youtube_reporting,
                       jobId=args.job_id,
                       onBehalfOfContentOwner=args.content_owner)
      args.report_url = get_report_url_from_user()

    # Download the selected report.
    if args.report_url:
      download_report(youtube_reporting, args.report_url, args.local_file)
  except HttpError, e:
    print 'An HTTP error %d occurred:\n%s' % (e.resp.status, e.content)

사용해 보기