Starboard Module Reference: socket.h

Defines Starboard socket I/O functions. Starboard supports IPv4 and IPv6, TCP and UDP, server and client sockets. Some platforms may not support IPv6, some may not support listening sockets, and some may not support any kind of sockets at all (or only allow them in debug builds).

Starboard ONLY supports non-blocking socket I/O, so all sockets are non-blocking at creation time.

Note that, on some platforms, API calls on one end of a socket connection may not be instantaneously aware of manipulations on the socket at the other end of the connection, thus requiring use of either an SbSocketWaiter or spin-polling.

TODO: For platforms that do not support sockets at all, they must support at least a high-level HTTP client API (to be defined later).

Macros

kSbSocketInvalid

Well-defined value for an invalid socket handle.

Enums

SbSocketAddressType

All possible address types.

Values

  • kSbSocketAddressTypeIpv4

    An IPv4 address, using only the first 4 entries of the address buffer.

  • kSbSocketAddressTypeIpv6

    An IPv6 address, which uses 16 entries of the address buffer.

SbSocketError

Enumeration of all Starboard socket operation results. Despite the enum name, note that the value actually describes the outcome of an operation, which is not always an error.

Values

  • kSbSocketOk

    The operation succeeded.

  • kSbSocketPending

    The operation is blocked on I/O. Either try again "later," or be very clever and wait on it with a SbSocketWaiter.

  • kSbSocketErrorConnectionReset

    This socket error is generated when the connection is reset unexpectedly and the connection is now invalid. This might happen for example if an read packet has the "TCP RST" bit set.

  • kSbSocketErrorFailed

    The operation failed for some other reason not specified above.

SbSocketProtocol

All possible IP socket types.

Values

  • kSbSocketProtocolTcp

    The TCP/IP protocol, a reliable, stateful, streaming protocol.

  • kSbSocketProtocolUdp

    The UDP/IP protocol, an unreliable, connectionless, discrete packet (datagram) protocol.

SbSocketResolveFilter

Bits that can be set when calling SbSocketResolve to filter the results.

Values

  • kSbSocketResolveFilterNone

    No filters, include everything.

  • kSbSocketResolveFilterIpv4

    Include Ipv4 addresses.

  • kSbSocketResolveFilterIpv6

    Include Ipv6 addresses.

Typedefs

SbSocket

A handle to a socket.

Definition

typedef SbSocketPrivate* SbSocket

Structs

SbSocketAddress

A representation of any possible supported address type.

Members

  • uint8_t address

    The storage for the address. For IPv4, only the first 4 bytes make up the address. For IPv6, the entire buffer of 16 bytes is meaningful. An address of all zeros means that the address is unspecified.

  • SbSocketAddressType type

    The type of address this represents (IPv4 vs IPv6).

  • int port

    The port component of this socket address. If not specified, it will be zero, which is officially undefined.

SbSocketResolution

The result of a host name resolution.

Members

  • SbSocketAddress* addresses

    An array of addresses associated with the host name.

  • int address_count

    The length of the addresses array.

Functions

SbSocketAccept

DEPRECATED with SB_API_VERSION 16

Accepts a pending connection on socket and returns a new SbSocket representing that connection. This function sets the error on socket and returns kSbSocketInvalid if it is unable to accept a new connection.

socket: The SbSocket that is accepting a pending connection.

Declaration

SbSocket SbSocketAccept(SbSocket socket)

SbSocketBind

DEPRECATED with SB_API_VERSION 16

Binds socket to a specific local interface and port specified by local_address. This function sets and returns the socket error if it is unable to bind to local_address.

socket: The SbSocket to be bound to the local interface. local_address: The local address to which the socket is to be bound. This value must not be NULL.

  • Setting the local address to port 0 (or not specifying a port) indicates that the function should choose a port for you.

  • Setting the IP address to 0.0.0.0 means that the socket should be bound to all interfaces.

Declaration

SbSocketError SbSocketBind(SbSocket socket, const SbSocketAddress *local_address)

SbSocketClearLastError

DEPRECATED with SB_API_VERSION 16

Clears the last error set on socket. The return value indicates whether the socket error was cleared.

Declaration

bool SbSocketClearLastError(SbSocket socket)

SbSocketConnect

DEPRECATED with SB_API_VERSION 16

Opens a connection of socket's type to the host and port specified by address. This function sets and returns the socket error if it is unable to connect to address. (It returns kSbSocketOk if it creates the connection successfully.)

socket: The type of connection that should be opened. address: The host and port to which the socket should connect.

Declaration

SbSocketError SbSocketConnect(SbSocket socket, const SbSocketAddress *address)

SbSocketCreate

DEPRECATED with SB_API_VERSION 16

Creates a new non-blocking socket for protocol protocol using address family address_type.

  • If successful, this function returns the newly created handle.

  • If unsuccessful, this function returns kSbSocketInvalid and also sets the last system error appropriately.

address_type: The type of IP address to use for the socket. protocol: The protocol to use for the socket.

Declaration

SbSocket SbSocketCreate(SbSocketAddressType address_type, SbSocketProtocol protocol)

SbSocketDestroy

DEPRECATED with SB_API_VERSION 16

Destroys the socket by flushing it, closing any connection that may be active on it, and reclaiming any resources associated with it, including any registration with an SbSocketWaiter.

The return value indicates whether the destruction was successful. However, even if this function returns false, you should not be able to use the socket any more.

socket: The SbSocket to be destroyed.

Declaration

bool SbSocketDestroy(SbSocket socket)

SbSocketFreeResolution

DEPRECATED with SB_API_VERSION 16

Frees a resolution allocated by SbSocketResolve.

resolution: The resolution to be freed.

Declaration

void SbSocketFreeResolution(SbSocketResolution *resolution)

SbSocketGetInterfaceAddress

DEPRECATED with SB_API_VERSION 16

Gets the source address and the netmask that would be used to connect to the destination. The netmask parameter is optional, and only populated if a non-NULL parameter is passed in. To determine which source IP will be used, the kernel takes into account the protocol, routes, destination ip, etc. The subnet mask, aka netmask, is used to find the routing prefix. In IPv6, this should be derived from the prefix value.

Returns whether it was possible to determine the source address and the netmask (if non-NULL value is passed) to be used to connect to the destination. This function could fail if the destination is not reachable, if it an invalid address, etc.

destination: The destination IP to be connected to. If IP addresses is not 0.0.0.0 or ::, then temporary addresses may be returned.

If the destination address is 0.0.0.0, and its type is kSbSocketAddressTypeIpv4, then any IPv4 local interface that is up and not a loopback interface is a valid return value.

If the destination address is ::, and its type is kSbSocketAddressTypeIpv6 then any IPv6 local interface that is up and not loopback or a link-local IP is a valid return value. However, in the case of IPv6, the address with the biggest scope must be returned. E.g., a globally scoped and routable IP is preferred over a unique local address (ULA). Also, the IP address that is returned must be permanent.

If destination address is NULL, then any IP address that is valid for destination set to 0.0.0.0 (IPv4) or :: (IPv6) can be returned.

out_source_address: This function places the address of the local interface in this output variable. out_netmask: This parameter is optional. If a non-NULL value is passed in, this function places the netmask associated with the source address in this output variable.

Declaration

bool SbSocketGetInterfaceAddress(const SbSocketAddress *const destination, SbSocketAddress *out_source_address, SbSocketAddress *out_netmask)

SbSocketGetLastError

DEPRECATED with SB_API_VERSION 16

Returns the last error set on socket. If socket is not valid, this function returns kSbSocketErrorFailed.

socket: The SbSocket that the last error is returned for.

Declaration

SbSocketError SbSocketGetLastError(SbSocket socket)

SbSocketGetLocalAddress

DEPRECATED with SB_API_VERSION 16

Gets the address that this socket is bound to locally, if the socket is connected. The return value indicates whether the address was retrieved successfully.

socket: The SbSocket for which the local address is retrieved. out_address: The SbSocket's local address.

Declaration

bool SbSocketGetLocalAddress(SbSocket socket, SbSocketAddress *out_address)

SbSocketIsConnected

DEPRECATED with SB_API_VERSION 16

Indicates whether socket is connected to anything. Invalid sockets are not connected.

socket: The SbSocket to be checked.

Declaration

bool SbSocketIsConnected(SbSocket socket)

SbSocketIsConnectedAndIdle

DEPRECATED with SB_API_VERSION 16

Returns whether socket is connected to anything, and, if so, whether it is receiving any data.

socket: The SbSocket to be checked.

Declaration

bool SbSocketIsConnectedAndIdle(SbSocket socket)

SbSocketIsIpv6Supported

Returns whether IPV6 is supported on the current platform.

Declaration

bool SbSocketIsIpv6Supported()

SbSocketIsValid

Returns whether the given socket handle is valid.

Declaration

static bool SbSocketIsValid(SbSocket socket)

SbSocketJoinMulticastGroup

DEPRECATED with SB_API_VERSION 16

Joins socket to an IP multicast group identified by address. The equivalent of IP_ADD_MEMBERSHIP. The return value indicates whether the socket was joined to the group successfully.

socket: The SbSocket to be joined to the IP multicast group. address: The location of the IP multicast group.

Declaration

bool SbSocketJoinMulticastGroup(SbSocket socket, const SbSocketAddress *address)

SbSocketListen

DEPRECATED with SB_API_VERSION 16

Causes socket to listen on the local address that socket was previously bound to by SbSocketBind. This function sets and returns the socket error if it is unable to listen for some reason. (It returns kSbSocketOk if it creates the connection successfully.)

socket: The SbSocket on which the function operates.

Declaration

SbSocketError SbSocketListen(SbSocket socket)

SbSocketReceiveFrom

DEPRECATED with SB_API_VERSION 16

Reads up to data_size bytes from socket into out_data and places the source address of the packet in out_source if out_source is not NULL. Returns the number of bytes read, or a negative number if there is an error, in which case SbSocketGetLastError can provide the precise error encountered.

Note that this function is NOT specified to make a best effort to read all data on all platforms, but it MAY still do so. It is specified to read however many bytes are available conveniently, meaning that it should avoid blocking until there is data. It can be run in a loop until SbSocketGetLastError returns kSbSocketPending to make it a best-effort read (but still only up to not blocking, unless you want to spin).

The primary use of out_source is to receive datagram packets from multiple sources on a UDP server socket. TCP has two endpoints connected persistently, so the address is unnecessary, but allowed.

socket: The SbSocket from which data is read. out_data: The data read from the socket. Must not be NULL. data_size: The number of bytes to read. out_source: The source address of the packet.

Declaration

int SbSocketReceiveFrom(SbSocket socket, char *out_data, int data_size, SbSocketAddress *out_source)

SbSocketResolve

DEPRECATED with SB_API_VERSION 16

Synchronously resolves hostname into the returned SbSocketResolution , which must be freed with SbSocketFreeResolution. The function returns NULL if it is unable to resolve hostname.

hostname: The hostname to be resolved. filters: A mask of SbSocketResolveFilter values used to filter the resolution. If filters does not specify an IP address family filter, all address families are included. However, if one IP address family filter is specified, only that address family is included. The function ignores unrecognized filter bits.

Declaration

SbSocketResolution* SbSocketResolve(const char *hostname, int filters)

SbSocketSendTo

DEPRECATED with SB_API_VERSION 16

Writes up to data_size bytes of data to destination via socket. Returns the number of bytes written, or a negative number if there is an error, in which case SbSocketGetLastError can provide the precise error encountered.

Note that this function is NOT specified to make a best effort to write all data on all platforms, but it MAY still do so. It is specified to write however many bytes are available conveniently. It can be run in a loop until SbSocketGetLastError returns kSbSocketPending to make it a best-effort write (but still only up to not blocking, unless you want to spin).

socket: The SbSocket to use to write data. data: The data written to the socket. Must not be NULL. data_size: The number of bytes of data to write. destination: The location to which data is written. This value must be NULL for TCP connections, which can only have a single endpoint.

The primary use of destination is to send datagram packets, which can go out to multiple sources from a single UDP server socket. TCP has two endpoints connected persistently, so setting destination when sending to a TCP socket will cause an error.

Declaration

int SbSocketSendTo(SbSocket socket, const char *data, int data_size, const SbSocketAddress *destination)

SbSocketSetBroadcast

DEPRECATED with SB_API_VERSION 16

Sets the SO_BROADCAST, or equivalent, option to value on socket. The return value indicates whether the option was actually set.

This option is only meaningful for UDP sockets and allows the socket to send to the broadcast address.

socket: The SbSocket for which the option is set. value: The new value for the option.

Declaration

bool SbSocketSetBroadcast(SbSocket socket, bool value)

SbSocketSetReceiveBufferSize

DEPRECATED with SB_API_VERSION 16

Sets the SO_RCVBUF, or equivalent, option to size on socket. The return value indicates whether the option was actually set.

socket: The SbSocket for which the option is set. size: The value for the option.

Declaration

bool SbSocketSetReceiveBufferSize(SbSocket socket, int32_t size)

SbSocketSetReuseAddress

DEPRECATED with SB_API_VERSION 16

Sets the SO_REUSEADDR, or equivalent, option to value on socket. The return value indicates whether the option was actually set.

This option allows a bound address to be reused if a socket isn't actively bound to it.

socket: The SbSocket for which the option is set. value: The new value for the option.

Declaration

bool SbSocketSetReuseAddress(SbSocket socket, bool value)

SbSocketSetSendBufferSize

DEPRECATED with SB_API_VERSION 16

Sets the SO_SNDBUF, or equivalent, option to size on socket. The return value indicates whether the option was actually set.

socket: The SbSocket for which the option is set. size: The value for the option.

Declaration

bool SbSocketSetSendBufferSize(SbSocket socket, int32_t size)

SbSocketSetTcpKeepAlive

DEPRECATED with SB_API_VERSION 16

Sets the SO_KEEPALIVE, or equivalent, option to value on socket. The return value indicates whether the option was actually set.

socket: The SbSocket for which the option is set. value: If set to true, then period specifies the minimum time in microseconds between keep-alive packets. If set to false, period is ignored. period: The time in microseconds between keep-alive packets. This value is only relevant if value is true.

Declaration

bool SbSocketSetTcpKeepAlive(SbSocket socket, bool value, int64_t period)

SbSocketSetTcpNoDelay

DEPRECATED with SB_API_VERSION 16

Sets the TCP_NODELAY, or equivalent, option to value on socket. The return value indicates whether the option was actually set.

This function disables the Nagle algorithm for reducing the number of packets sent when converting from a stream to packets. Disabling Nagle generally puts the data for each Send call into its own packet, but does not guarantee that behavior.

socket: The SbSocket for which the option is set. value: Indicates whether the Nagle algorithm should be disabled (value=true).

Declaration

bool SbSocketSetTcpNoDelay(SbSocket socket, bool value)

SbSocketSetTcpWindowScaling

DEPRECATED with SB_API_VERSION 16

Sets the SO_WINSCALE, or equivalent, option to value on socket. The return value indicates whether the option was actually set.

socket: The SbSocket for which the option is set. value: The value for the option.

Declaration

bool SbSocketSetTcpWindowScaling(SbSocket socket, bool value)