Denetleyici Düzenleme Modu (Oturum Kapsamlı)
KuralReact bileşenlerini ve bunlara karşılık gelen izole geliştirme denetleyicilerini oturumlar arası kirlenme olmadan birlikte yönetmek için durum bilgisi olan, oturum kapsamlı bir Denetleyici Düzenleme Modu oluşturur.
Bu kurala erişmek için oturum açın
Build It! serisinde kullanılan kuralın tamamını görüntülemek ve kopyalamak için Google Geliştirici Profilinizle oturum açın.
Geliştirici Profili Gerekli
Geliştirici profili için uygun değilsiniz. Bu özelliği etkinleştirmek için Workspace yöneticinizle iletişime geçin.
Geliştirici Profili oluşturun
Tüm Build It! becerilerinin, kurallarının, istemlerinin ve yapılarının kilidini açmak için ücretsiz bir Google Geliştirici Profili oluşturun.
Builder Central'a katılarak erişim sağlayın
Tüm Build It! becerilerine, kurallarına, istemlerine ve yapılarına erişmek için ücretsiz Builder üye rozetinizi tek tıklamayla alın.
Oturum Kapsamlı Denetleyici Düzenleme Modu'nun İşleyiş Şekli
Bileşen denetleyici açıkken kullanıcı arayüzü bileşenleri üzerinde yineleme yaptığınızda, bileşen düzenlemelerinin aynı turda eşleşen denetleyici görünümünü güncellemesini istersiniz. Bu durumda, gelecekteki oturumlarda denetleyici düzenlemelerini kalıcı olarak zorunlu kılmazsınız. Bu kural, görüşme kapsamlı bir işaretçi dosyası kullanarak bu sorunu çözer:
- Her yeni oturum için varsayılan olarak KAPALI: Yepyeni sohbetler Normal Mod'da başlar. Böylece rutin düzenlemeler yalnızca istediğiniz dosyaları etkiler.
- Denetleyici Düzenleme Modu'na girme: "Denetleyici düzenleme moduna gir" (veya "Denetleyici modunu aç") deyin. Aracı,
<appDataDir>/brain/<conversation-id>/inspector-mode.activekonumunda oturum kapsamlı bir işaretçi dosyası oluşturur,src/dev/registry.tsdosyasını okur ve bu oturum için kapsanan her kayıtlı bileşeni listeler. - Otomatik ortak bakım: Etkin durumdayken, kayıtlı bir bileşende istediğiniz her değişiklik önce bileşeni günceller ve Bileşen Denetleyici Güncelleyici iş akışını kullanarak eşleşen
src/dev/inspectors/[ComponentName]Inspector.tsxöğesini hemen senkronize eder,npx tsc --noEmitöğesini çalıştırır ve yanıtı bir onay çipiyle damgalar. - İstediğiniz zaman sorunsuz bir şekilde çıkın: İşaretçi dosyasını kaldırmak ve normal tek hedefli düzenlemeye dönmek için "Exit inspector editing mode" (Denetleyici düzenleme modundan çık) deyin. Modun bir oturumda etkinleştirilmesi, paralel veya gelecekteki oturumları etkilemez.
Google Antigravity'de yükleme
Bu kuralı, Google Antigravity çalışma alanınıza 9. bölümdeki iki Bileşen Denetleyici becerisiyle birlikte yerleştirin:
- Proje çalışma alanınızda
.agents/rules/klasörünü oluşturun (veya çalışma alanı kuralı eklemek için Google Antigravity Özelleştirmeler > Kurallar'ı açın). - Aşağıdaki Markdown kuralının tamamını
.agents/rules/içindeinspector-editing-mode.mdolarak kaydedin. - Temsilcinizin bu kuralda referans verilen hem iskele hem de senkronizasyon iş akışlarına sahip olması için Component Inspector Generator ve Component Inspector Updater yardımcı becerilerini yükleyin.
İnceleme Düzenleme Modu Kural Tanımı
Bu kural tanımının tamamını çalışma alanınıza inspector-editing-mode.md olarak kopyalayın.
# Inspector Editing Mode (Session-Scoped)
This rule establishes a stateful, session-scoped **Inspector Editing Mode** for co-maintaining React components and their corresponding isolated development inspectors (`src/dev/inspectors/[ComponentName]Inspector.tsx`).
---
## 1. Scope & Isolation Model
* **Session-Scoped**: The on/off state of this mode is strictly scoped to the current conversation session (`<conversation-id>`).
* **Default State**: Every new conversation session begins with Inspector Editing Mode **OFF** by default.
* **State Marker**:
- Activation is tracked at `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
- If this file exists for the active session's conversation ID, Inspector Editing Mode is **ON**.
- If this file does NOT exist, Inspector Editing Mode is **OFF**.
* **Zero Cross-Session Contamination**: Turning this mode on in one conversation has no effect on any other parallel or future conversation sessions.
---
## 2. Trigger Commands & State Transitions
### A. Entering Inspector Mode
* **Trigger Phrases**:
- *"Enter inspector editing mode"*
- *"Start inspector editing mode"*
- *"Turn on inspector mode"*
- *"Inspector mode on"*
* **Agent Action**:
1. Create the marker file at `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
2. Read `src/dev/registry.ts` to identify all currently registered components.
3. Respond confirming:
- Inspector Editing Mode is now **ACTIVE** for this session.
- Any subsequent changes to registered components will automatically update both the component and its dev inspector.
- List the currently registered components covered by this mode.
### B. Exiting Inspector Mode
* **Trigger Phrases**:
- *"Exit inspector editing mode"*
- *"Stop inspector editing mode"*
- *"Turn off inspector mode"*
- *"Inspector mode off"*
* **Agent Action**:
1. Remove the marker file at `<appDataDir>/brain/<conversation-id>/inspector-mode.active` if present.
2. Respond confirming that Inspector Editing Mode is now **DEACTIVATED** for this session and normal single-target editing has resumed.
### C. Status Query
* **Trigger Phrases**:
- *"Is inspector mode active?"*
- *"Inspector mode status"*
- *"What mode am I in?"*
* **Agent Action**:
- Check for the existence of `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
- Report whether the current session is in **Inspector Mode** or **Normal Mode**.
---
## 3. Co-Maintenance Behavior While Mode is ACTIVE
Whenever the user requests changes, fixes, or refactors to ANY component registered in `src/dev/registry.ts`:
1. **Step 1: Update the Core Component**
- Apply the requested code changes, props modifications, or behavioral logic in `src/components/.../[ComponentName].tsx` (or `src/views/.../[ComponentName].tsx`).
- Update any relevant unit tests in `scripts/` or `__tests__/`.
2. **Step 2: Automatically Synchronize the Dev Inspector**
- Locate the matching inspector at `src/dev/inspectors/[ComponentName]Inspector.tsx`.
- Apply the `component-inspector-updater` workflow:
- **Props & State**: Reconcile any new, altered, or deleted props into the *Editable State* or *Props State* categories.
- **Computed State**: Update derived `useMemo` metrics if underlying rules or formulas changed.
- **Test Verification Cards**: Synchronize the plain-English test fixtures at the bottom of the inspector with the new behavior, updating click handlers so `[Load Test Fixture]` accurately reflects the new state.
- **Preserve Custom Presets**: Keep all existing scenario presets (e.g. week overhauls, superset pairs, edge cases) intact, adapting their shapes to new prop signatures.
- **Advance Timestamp Chip**: Advance `const GENERATED_AT = 'YYYY-MM-DD HH:MM [TIMEZONE]';` to the current local timestamp.
- **No Auto-Scroll**: Ensure all internal scrolling is scoped strictly to element containers (`containerRef.current.scrollTop = containerRef.current.scrollHeight`) with zero page-level scrolling.
3. **Step 3: Verify Types**
- Run `npx tsc --noEmit` to ensure type alignment between the component and its inspector.
- **DO NOT** run raw `npm run build` while a local dev server is active to prevent wiping out `.next/` chunk manifests.
4. **Step 4: Badge Confirmation in Response**
- Include an explicit status chip in your response header or summary:
`[Inspector Mode: Synced <ComponentName> & Dev Inspector]`
---
## 4. Behavior While Mode is INACTIVE (Default)
* When the mode is OFF, the agent performs only the exact requested file modifications.
* Do NOT edit `src/dev/inspectors/` unless the user explicitly requests an inspector update or instructs the agent to create a brand new inspector route.