Режим редактирования инспектора (на уровне сеанса)
ПравилоУстанавливает режим редактирования инспектора с сохранением состояния на уровне сеанса для совместного обслуживания компонентов React и соответствующих им изолированных инспекторов разработки без перекрестного загрязнения сеансов.
Чтобы получить доступ к этому правилу, войдите в аккаунт.
Чтобы посмотреть и скопировать полное правило, используемое в серии Build It!, войдите в профиль разработчика Google.
Требуется профиль разработчика
Вы не можете создать профиль разработчика. Попросите администратора Workspace включить эту функцию.
Создать профиль разработчика
Создайте бесплатный профиль разработчика Google, чтобы получить доступ ко всем навыкам, правилам, подсказкам и артефактам в Build It!.
Присоединяйтесь к Builder Central, чтобы получить доступ
Получите бесплатный значок участника Builder в один клик, чтобы разблокировать все навыки, правила, подсказки и артефакты Build It!
Как работает режим редактирования в инспекторе на уровне сеанса
Когда вы работаете с компонентами интерфейса при открытом инспекторе компонентов, вы хотите, чтобы изменения компонентов обновляли соответствующее представление инспектора в том же цикле, не форсируя постоянно изменения инспектора в будущих сеансах. Это правило решает проблему с помощью файла-маркера на уровне чата:
- По умолчанию отключен для каждого нового сеанса. Новые чаты начинаются в обычном режиме, поэтому изменения вносятся только в те файлы, которые вы указываете.
- Включить режим редактирования инспектора. Скажите "Включи режим редактирования инспектора" или "Включи режим инспектора". Агент создает файл маркера на уровне сеанса в
<appDataDir>/brain/<conversation-id>/inspector-mode.active, считываетsrc/dev/registry.tsи перечисляет все зарегистрированные компоненты, охваченные этим сеансом. - Автоматическое совместное обслуживание. Если оно активно, то при любом запросе на изменение зарегистрированного компонента сначала обновляется этот компонент, а затем сразу же синхронизируется соответствующий ему
src/dev/inspectors/[ComponentName]Inspector.tsxс помощью рабочего процесса Component Inspector Updater. После этого запускаетсяnpx tsc --noEmit, а в ответ добавляется чип подтверждения. - Выход из режима. Чтобы удалить файл маркера и вернуться к обычному редактированию одной цели, скажите "Выйти из режима редактирования инспектора". Включение режима в одном сеансе не влияет на параллельные или будущие сеансы.
Как установить Google Antigravity
Поместите это правило в рабочую область Google Antigravity вместе с двумя навыками инспектора компонентов из эпизода 9:
- Создайте папку
.agents/rules/в рабочей области проекта (или откройте Google Antigravity Customizations > Rules (Настройки > Правила), чтобы добавить правило рабочей области). - Сохраните полное правило Markdown ниже как
inspector-editing-mode.mdв.agents/rules/. - Установите сопутствующие навыки Component Inspector Generator и Component Inspector Updater, чтобы у агента были рабочие процессы формирования шаблонов и синхронизации, на которые ссылается это правило.
Определение правила в режиме редактирования инспектора
Скопируйте это полное определение правила в рабочую область как inspector-editing-mode.md.
# Inspector Editing Mode (Session-Scoped)
This rule establishes a stateful, session-scoped **Inspector Editing Mode** for co-maintaining React components and their corresponding isolated development inspectors (`src/dev/inspectors/[ComponentName]Inspector.tsx`).
---
## 1. Scope & Isolation Model
* **Session-Scoped**: The on/off state of this mode is strictly scoped to the current conversation session (`<conversation-id>`).
* **Default State**: Every new conversation session begins with Inspector Editing Mode **OFF** by default.
* **State Marker**:
- Activation is tracked at `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
- If this file exists for the active session's conversation ID, Inspector Editing Mode is **ON**.
- If this file does NOT exist, Inspector Editing Mode is **OFF**.
* **Zero Cross-Session Contamination**: Turning this mode on in one conversation has no effect on any other parallel or future conversation sessions.
---
## 2. Trigger Commands & State Transitions
### A. Entering Inspector Mode
* **Trigger Phrases**:
- *"Enter inspector editing mode"*
- *"Start inspector editing mode"*
- *"Turn on inspector mode"*
- *"Inspector mode on"*
* **Agent Action**:
1. Create the marker file at `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
2. Read `src/dev/registry.ts` to identify all currently registered components.
3. Respond confirming:
- Inspector Editing Mode is now **ACTIVE** for this session.
- Any subsequent changes to registered components will automatically update both the component and its dev inspector.
- List the currently registered components covered by this mode.
### B. Exiting Inspector Mode
* **Trigger Phrases**:
- *"Exit inspector editing mode"*
- *"Stop inspector editing mode"*
- *"Turn off inspector mode"*
- *"Inspector mode off"*
* **Agent Action**:
1. Remove the marker file at `<appDataDir>/brain/<conversation-id>/inspector-mode.active` if present.
2. Respond confirming that Inspector Editing Mode is now **DEACTIVATED** for this session and normal single-target editing has resumed.
### C. Status Query
* **Trigger Phrases**:
- *"Is inspector mode active?"*
- *"Inspector mode status"*
- *"What mode am I in?"*
* **Agent Action**:
- Check for the existence of `<appDataDir>/brain/<conversation-id>/inspector-mode.active`.
- Report whether the current session is in **Inspector Mode** or **Normal Mode**.
---
## 3. Co-Maintenance Behavior While Mode is ACTIVE
Whenever the user requests changes, fixes, or refactors to ANY component registered in `src/dev/registry.ts`:
1. **Step 1: Update the Core Component**
- Apply the requested code changes, props modifications, or behavioral logic in `src/components/.../[ComponentName].tsx` (or `src/views/.../[ComponentName].tsx`).
- Update any relevant unit tests in `scripts/` or `__tests__/`.
2. **Step 2: Automatically Synchronize the Dev Inspector**
- Locate the matching inspector at `src/dev/inspectors/[ComponentName]Inspector.tsx`.
- Apply the `component-inspector-updater` workflow:
- **Props & State**: Reconcile any new, altered, or deleted props into the *Editable State* or *Props State* categories.
- **Computed State**: Update derived `useMemo` metrics if underlying rules or formulas changed.
- **Test Verification Cards**: Synchronize the plain-English test fixtures at the bottom of the inspector with the new behavior, updating click handlers so `[Load Test Fixture]` accurately reflects the new state.
- **Preserve Custom Presets**: Keep all existing scenario presets (e.g. week overhauls, superset pairs, edge cases) intact, adapting their shapes to new prop signatures.
- **Advance Timestamp Chip**: Advance `const GENERATED_AT = 'YYYY-MM-DD HH:MM [TIMEZONE]';` to the current local timestamp.
- **No Auto-Scroll**: Ensure all internal scrolling is scoped strictly to element containers (`containerRef.current.scrollTop = containerRef.current.scrollHeight`) with zero page-level scrolling.
3. **Step 3: Verify Types**
- Run `npx tsc --noEmit` to ensure type alignment between the component and its inspector.
- **DO NOT** run raw `npm run build` while a local dev server is active to prevent wiping out `.next/` chunk manifests.
4. **Step 4: Badge Confirmation in Response**
- Include an explicit status chip in your response header or summary:
`[Inspector Mode: Synced <ComponentName> & Dev Inspector]`
---
## 4. Behavior While Mode is INACTIVE (Default)
* When the mode is OFF, the agent performs only the exact requested file modifications.
* Do NOT edit `src/dev/inspectors/` unless the user explicitly requests an inspector update or instructs the agent to create a brand new inspector route.