addAccessConfig(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Adds an access config to an instance's network interface.
aggregatedList(project=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves aggregated list of all of the instances in your project across all regions and zones.
aggregatedList_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
attachDisk(project=*, zone=*, instance=*, body=None, forceAttach=None, requestId=None)
Attaches an existing Disk resource to an instance. You must first create the disk before you can attach it. It is not possible to create and attach a disk at the same time. For more information, read Adding a persistent disk to your instance.
delete(project=*, zone=*, instance=*, requestId=None)
Deletes the specified Instance resource. For more information, see Stopping or Deleting an Instance.
Deletes an access config from an instance's network interface.
detachDisk(project=*, zone=*, instance=*, deviceName=*, requestId=None)
Detaches a disk from an instance.
get(project=*, zone=*, instance=*)
Returns the specified Instance resource. Gets a list of available instances by making a list() request.
getGuestAttributes(project=*, zone=*, instance=*, variableKey=None, queryPath=None)
Returns the specified guest attributes entry.
getIamPolicy(project=*, zone=*, resource=*)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
getSerialPortOutput(project=*, zone=*, instance=*, start=None, port=None)
Returns the last 1 MB of serial port output from the specified instance.
getShieldedInstanceIdentity(project=*, zone=*, instance=*)
Returns the Shielded Instance Identity of an instance
insert(project=*, zone=*, body=None, sourceInstanceTemplate=None, requestId=None)
Creates an instance resource in the specified project using the data included in the request.
list(project=*, zone=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves the list of instances contained within the specified zone.
Retrieves the list of referrers to instances contained within the specified zone. For more information, read Viewing Referrers to VM Instances.
listReferrers_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
list_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
reset(project=*, zone=*, instance=*, requestId=None)
Performs a reset on the instance. This is a hard reset the VM does not do a graceful shutdown. For more information, see Resetting an instance.
setDeletionProtection(project=*, zone=*, resource=*, deletionProtection=None, requestId=None)
Sets deletion protection on the instance.
setDiskAutoDelete(project=*, zone=*, instance=*, autoDelete=*, deviceName=*, requestId=None)
Sets the auto-delete flag for a disk attached to an instance.
setIamPolicy(project=*, zone=*, resource=*, body=None)
Sets the access control policy on the specified resource. Replaces any existing policy.
setLabels(project=*, zone=*, instance=*, body=None, requestId=None)
Sets labels on an instance. To learn more about labels, read the Labeling Resources documentation.
setMachineResources(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the number and/or type of accelerator for a stopped instance to the values specified in the request.
setMachineType(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the machine type for a stopped instance to the machine type specified in the request.
setMetadata(project=*, zone=*, instance=*, body=None, requestId=None)
Sets metadata for the specified instance to the data included in the request.
setMinCpuPlatform(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the minimum CPU platform that this instance should use. This method can only be called on a stopped instance. For more information, read Specifying a Minimum CPU Platform.
setScheduling(project=*, zone=*, instance=*, body=None, requestId=None)
Sets an instance's scheduling options.
setServiceAccount(project=*, zone=*, instance=*, body=None, requestId=None)
Sets the service account on the instance. For more information, read Changing the service account and access scopes for an instance.
setShieldedInstanceIntegrityPolicy(project=*, zone=*, instance=*, body=None, requestId=None)
Sets the Shielded Instance integrity policy for an instance. You can only use this method on a running instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
setTags(project=*, zone=*, instance=*, body=None, requestId=None)
Sets network tags for the specified instance to the data included in the request.
simulateMaintenanceEvent(project=*, zone=*, instance=*)
Simulates a maintenance event on the instance.
start(project=*, zone=*, instance=*, requestId=None)
Starts an instance that was stopped using the instances().stop method. For more information, see Restart an instance.
startWithEncryptionKey(project=*, zone=*, instance=*, body=None, requestId=None)
Starts an instance that was stopped using the instances().stop method. For more information, see Restart an instance.
stop(project=*, zone=*, instance=*, requestId=None)
Stops a running instance, shutting it down cleanly, and allows you to restart the instance at a later time. Stopped instances do not incur VM usage charges while they are stopped. However, resources that the VM is using, such as persistent disks and static IP addresses, will continue to be charged until they are deleted. For more information, see Stopping an instance.
testIamPermissions(project=*, zone=*, resource=*, body=None)
Returns permissions that a caller has on the specified resource.
updateAccessConfig(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Updates the specified access config from an instance's network interface with the data included in the request. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
updateDisplayDevice(project=*, zone=*, instance=*, body=None, requestId=None)
Updates the Display config for a VM instance. You can only use this method on a stopped VM instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
updateNetworkInterface(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Updates an instance's network interface. This method follows PATCH semantics.
updateShieldedInstanceConfig(project=*, zone=*, instance=*, body=None, requestId=None)
Updates the Shielded Instance config for an instance. You can only use this method on a stopped instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
addAccessConfig(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Adds an access config to an instance's network interface.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
networkInterface: string, The name of the network interface to add to this instance. (required)
body: object, The request body.
The object takes the form of:
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
aggregatedList(project=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves aggregated list of all of the instances in your project across all regions and zones.
Args:
project: string, Project ID for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
Returns:
An object of the form:
{
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#instanceAggregatedList", # [Output Only] Type of resource. Always compute#instanceAggregatedList for aggregated lists of Instance resources.
"items": { # An object that contains a list of instances scoped by zone.
"a_key": { # [Output Only] Name of the scope containing this set of instances.
"instances": [ # [Output Only] A list of instances contained in this scope.
{ # Represents an Instance resource.
#
# An instance is a virtual machine that is hosted on Google Cloud Platform. For more information, read Virtual Machine Instances. (== resource_for {$api_version}.instances ==)
"status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, STOPPED, SUSPENDING, SUSPENDED, and TERMINATED.
"reservationAffinity": { # Specifies the reservations that this instance can consume from. # Specifies the reservations that this instance can consume from.
"values": [ # Corresponds to the label values of a reservation resource.
"A String",
],
"key": "A String", # Corresponds to the label key of a reservation resource. To target a SPECIFIC_RESERVATION by name, specify googleapis.com/reservation-name as the key and specify the name of your reservation as its value.
"consumeReservationType": "A String", # Specifies the type of reservation from which this instance can consume resources: ANY_RESERVATION (default), SPECIFIC_RESERVATION, or NO_RESERVATION. See Consuming reserved instances for examples.
},
"guestAccelerators": [ # A list of the type and count of accelerator cards attached to the instance.
{ # A specification of the type and number of accelerator cards attached to the instance.
"acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
"acceleratorType": "A String", # Full or partial URL of the accelerator type resource to attach to this instance. For example: projects/my-project/zones/us-central1-c/acceleratorTypes/nvidia-tesla-p100 If you are creating an instance template, specify only the accelerator name. See GPUs on Compute Engine for a full list of accelerator types.
},
],
"labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
"a_key": "A String",
},
"displayDevice": { # A set of Display Device options # Enables display device for the instance.
"enableDisplay": True or False, # Defines whether the instance has Display enabled.
},
"scheduling": { # Sets the scheduling options for an Instance. NextID: 9 # Sets the scheduling options for this instance.
"preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
"automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
#
# By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
"nodeAffinities": [ # A set of node affinity and anti-affinity configurations. Refer to Configuring node affinity for more information.
{ # Node Affinity: the configuration of desired nodes onto which this Instance could be scheduled.
"operator": "A String", # Defines the operation of node selection. Valid operators are IN for affinity and NOT_IN for anti-affinity.
"values": [ # Corresponds to the label values of Node resource.
"A String",
],
"key": "A String", # Corresponds to the label key of Node resource.
},
],
"onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
},
"minCpuPlatform": "A String", # Specifies a minimum CPU platform for the VM instance. Applicable values are the friendly names of CPU platforms, such as minCpuPlatform: "Intel Haswell" or minCpuPlatform: "Intel Sandy Bridge".
"serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
#
# Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
{ # A service account.
"scopes": [ # The list of scopes to be made available for this service account.
"A String",
],
"email": "A String", # Email address of the service account.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"networkInterfaces": [ # An array of network configurations for this instance. These specify how interfaces are configured to interact with other network services, such as connecting to the internet. Multiple interfaces are supported per instance.
{ # A network interface resource attached to an instance.
"kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
"aliasIpRanges": [ # An array of alias IP ranges for this network interface. You can only specify this field for network interfaces in VPC networks.
{ # An alias IP range attached to an instance's network interface.
"subnetworkRangeName": "A String", # The name of a subnetwork secondary IP range from which to allocate an IP alias range. If not specified, the primary range of the subnetwork is used.
"ipCidrRange": "A String", # The IP alias ranges to allocate for this interface. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (such as 10.2.3.4), a netmask (such as /24) or a CIDR-formatted string (such as 10.1.2.0/24).
},
],
"network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
#
# If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
# - projects/project/global/networks/network
# - global/networks/default
"accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
},
],
"networkIP": "A String", # An IPv4 internal IP address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
"fingerprint": "A String", # Fingerprint hash of contents stored in this network interface. This field will be ignored when inserting an Instance or adding a NetworkInterface. An up-to-date fingerprint must be provided in order to update the NetworkInterface, otherwise the request will fail with error 412 conditionNotMet.
"subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not specify this field. If the network is in auto subnet mode, specifying the subnetwork is optional. If the network is in custom subnet mode, specifying the subnetwork is required. If you specify this field, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
# - regions/region/subnetworks/subnetwork
"name": "A String", # [Output Only] The name of the network interface, which is generated by the server. For network devices, these are eth0, eth1, etc.
},
],
"startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
"shieldedInstanceConfig": { # A set of Shielded Instance options.
"enableVtpm": True or False, # Defines whether the instance has the vTPM enabled.
"enableIntegrityMonitoring": True or False, # Defines whether the instance has integrity monitoring enabled.
"enableSecureBoot": True or False, # Defines whether the instance has Secure Boot enabled.
},
"zone": "A String", # [Output Only] URL of the zone where the instance resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"hostname": "A String", # Specifies the hostname of the instance. The specified hostname must be RFC1035 compliant. If hostname is not specified, the default hostname is [INSTANCE_NAME].c.[PROJECT_ID].internal when using the global DNS, and [INSTANCE_NAME].[ZONE].c.[PROJECT_ID].internal when using zonal DNS.
"shieldedInstanceIntegrityPolicy": { # The policy describes the baseline against which Instance boot integrity is measured.
"updateAutoLearnPolicy": True or False, # Updates the integrity policy baseline using the measurements from the VM instance's most recent boot.
},
"statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
"metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
"items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
{
"value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
"key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
},
],
"kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve the resource.
},
"cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
"deletionProtection": True or False, # Whether the resource should be protected against deletion.
"canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"tags": { # A set of instance tags. # Tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035. Multiple tags can be specified via the 'tags.items' field.
"items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
"A String",
],
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the tags' contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update tags. You must always provide an up-to-date fingerprint hash in order to update or change tags.
#
# To see the latest fingerprint, make get() request to the instance.
},
"labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the label's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels.
#
# To see the latest fingerprint, make get() request to the instance.
"machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
# zones/us-central1-f/machineTypes/n1-standard-1
#
#
# To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
# zones/zone/machineTypes/custom-CPUS-MEMORY
#
#
# For example: zones/us-central1-f/machineTypes/custom-4-5120
#
# For a full list of restrictions, read the Specifications for custom machine types.
"kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
{ # An instance-attached disk resource.
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
#
# If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
#
# If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
#
# If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
#
# If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disk-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
"kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
"initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
"sourceSnapshot": "A String", # The source snapshot to create this disk. When creating a new instance, one of initializeParams.sourceSnapshot or initializeParams.sourceImage or disks.source is required except for local SSD.
#
# To create a disk with a snapshot that you created, specify the snapshot name in the following format:
# global/snapshots/my-backup
#
#
# If the source snapshot is deleted later, this field will not be set.
"diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance. If the disk with the instance name exists already in the given zone/region, a new name will be automatically generated.
"description": "A String", # An optional description. Provide this property when creating the disk.
"labels": { # Labels to apply to this disk. These can be later modified by the disks.setLabels method. This field is only applicable for persistent disks.
"a_key": "A String",
},
"sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
# https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
#
#
# Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
# - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
# - projects/project/zones/zone/diskTypes/diskType
# - zones/zone/diskTypes/diskType Note that for InstanceTemplate, this is the name of the disk type, not URL.
"diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB. The size must be at least 10 GB. If you specify a sourceImage, which is required for boot disks, the default size is the size of the sourceImage. If you do not specify a sourceImage, the default disk size is 500 GB.
"resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations. Specified using the full or partial URL. For instance template, specify only the resource policy name.
"A String",
],
"sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
# projects/debian-cloud/global/images/family/debian-9
#
#
# Alternatively, use a specific version of a public operating system image:
# projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
#
#
# To create a disk with a custom image that you created, specify the image name in the following format:
# global/images/my-custom-image
#
#
# You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
# global/images/family/my-image-family
#
#
# If the source image is deleted later, this field will not be set.
"sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
},
"autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
"index": 42, # [Output Only] A zero-based index to this disk, where 0 is reserved for the boot disk. If you have many disks attached to an instance, each disk would have a unique index number.
"boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
"guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read Enabling guest operating system features to see a list of available options.
{ # Guest OS features.
"type": "A String", # The ID of a supported feature. Read Enabling guest operating system features to see a list of available options.
},
],
"diskSizeGb": "A String", # The size of the disk in GB.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance. TODO(b/131765817): Update documentation when NVME is supported.
"licenses": [ # [Output Only] Any valid publicly visible licenses.
"A String",
],
"type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
#
# Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
},
],
"warning": { # [Output Only] Informational warning which replaces the list of instances when the list is empty.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
},
},
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
aggregatedList_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
attachDisk(project=*, zone=*, instance=*, body=None, forceAttach=None, requestId=None)
Attaches an existing Disk resource to an instance. You must first create the disk before you can attach it. It is not possible to create and attach a disk at the same time. For more information, read Adding a persistent disk to your instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
body: object, The request body.
The object takes the form of:
{ # An instance-attached disk resource.
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
#
# If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
#
# If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
#
# If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
#
# If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disk-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
"kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
"initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
"sourceSnapshot": "A String", # The source snapshot to create this disk. When creating a new instance, one of initializeParams.sourceSnapshot or initializeParams.sourceImage or disks.source is required except for local SSD.
#
# To create a disk with a snapshot that you created, specify the snapshot name in the following format:
# global/snapshots/my-backup
#
#
# If the source snapshot is deleted later, this field will not be set.
"diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance. If the disk with the instance name exists already in the given zone/region, a new name will be automatically generated.
"description": "A String", # An optional description. Provide this property when creating the disk.
"labels": { # Labels to apply to this disk. These can be later modified by the disks.setLabels method. This field is only applicable for persistent disks.
"a_key": "A String",
},
"sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
# https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
#
#
# Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
# - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
# - projects/project/zones/zone/diskTypes/diskType
# - zones/zone/diskTypes/diskType Note that for InstanceTemplate, this is the name of the disk type, not URL.
"diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB. The size must be at least 10 GB. If you specify a sourceImage, which is required for boot disks, the default size is the size of the sourceImage. If you do not specify a sourceImage, the default disk size is 500 GB.
"resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations. Specified using the full or partial URL. For instance template, specify only the resource policy name.
"A String",
],
"sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
# projects/debian-cloud/global/images/family/debian-9
#
#
# Alternatively, use a specific version of a public operating system image:
# projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
#
#
# To create a disk with a custom image that you created, specify the image name in the following format:
# global/images/my-custom-image
#
#
# You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
# global/images/family/my-image-family
#
#
# If the source image is deleted later, this field will not be set.
"sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
},
"autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
"index": 42, # [Output Only] A zero-based index to this disk, where 0 is reserved for the boot disk. If you have many disks attached to an instance, each disk would have a unique index number.
"boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
"guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read Enabling guest operating system features to see a list of available options.
{ # Guest OS features.
"type": "A String", # The ID of a supported feature. Read Enabling guest operating system features to see a list of available options.
},
],
"diskSizeGb": "A String", # The size of the disk in GB.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance. TODO(b/131765817): Update documentation when NVME is supported.
"licenses": [ # [Output Only] Any valid publicly visible licenses.
"A String",
],
"type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
#
# Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
}
forceAttach: boolean, Whether to force attach the disk even if it's currently attached to another instance.
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
delete(project=*, zone=*, instance=*, requestId=None)
Deletes the specified Instance resource. For more information, see Stopping or Deleting an Instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to delete. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
deleteAccessConfig(project=*, zone=*, instance=*, accessConfig=*, networkInterface=*, requestId=None)
Deletes an access config from an instance's network interface.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
accessConfig: string, The name of the access config to delete. (required)
networkInterface: string, The name of the network interface. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
detachDisk(project=*, zone=*, instance=*, deviceName=*, requestId=None)
Detaches a disk from an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Instance name for this request. (required)
deviceName: string, The device name of the disk to detach. Make a get() request on the instance to view currently attached disks and device names. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
get(project=*, zone=*, instance=*)
Returns the specified Instance resource. Gets a list of available instances by making a list() request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to return. (required)
Returns:
An object of the form:
{ # Represents an Instance resource.
#
# An instance is a virtual machine that is hosted on Google Cloud Platform. For more information, read Virtual Machine Instances. (== resource_for {$api_version}.instances ==)
"status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, STOPPED, SUSPENDING, SUSPENDED, and TERMINATED.
"reservationAffinity": { # Specifies the reservations that this instance can consume from. # Specifies the reservations that this instance can consume from.
"values": [ # Corresponds to the label values of a reservation resource.
"A String",
],
"key": "A String", # Corresponds to the label key of a reservation resource. To target a SPECIFIC_RESERVATION by name, specify googleapis.com/reservation-name as the key and specify the name of your reservation as its value.
"consumeReservationType": "A String", # Specifies the type of reservation from which this instance can consume resources: ANY_RESERVATION (default), SPECIFIC_RESERVATION, or NO_RESERVATION. See Consuming reserved instances for examples.
},
"guestAccelerators": [ # A list of the type and count of accelerator cards attached to the instance.
{ # A specification of the type and number of accelerator cards attached to the instance.
"acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
"acceleratorType": "A String", # Full or partial URL of the accelerator type resource to attach to this instance. For example: projects/my-project/zones/us-central1-c/acceleratorTypes/nvidia-tesla-p100 If you are creating an instance template, specify only the accelerator name. See GPUs on Compute Engine for a full list of accelerator types.
},
],
"labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
"a_key": "A String",
},
"displayDevice": { # A set of Display Device options # Enables display device for the instance.
"enableDisplay": True or False, # Defines whether the instance has Display enabled.
},
"scheduling": { # Sets the scheduling options for an Instance. NextID: 9 # Sets the scheduling options for this instance.
"preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
"automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
#
# By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
"nodeAffinities": [ # A set of node affinity and anti-affinity configurations. Refer to Configuring node affinity for more information.
{ # Node Affinity: the configuration of desired nodes onto which this Instance could be scheduled.
"operator": "A String", # Defines the operation of node selection. Valid operators are IN for affinity and NOT_IN for anti-affinity.
"values": [ # Corresponds to the label values of Node resource.
"A String",
],
"key": "A String", # Corresponds to the label key of Node resource.
},
],
"onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
},
"minCpuPlatform": "A String", # Specifies a minimum CPU platform for the VM instance. Applicable values are the friendly names of CPU platforms, such as minCpuPlatform: "Intel Haswell" or minCpuPlatform: "Intel Sandy Bridge".
"serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
#
# Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
{ # A service account.
"scopes": [ # The list of scopes to be made available for this service account.
"A String",
],
"email": "A String", # Email address of the service account.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"networkInterfaces": [ # An array of network configurations for this instance. These specify how interfaces are configured to interact with other network services, such as connecting to the internet. Multiple interfaces are supported per instance.
{ # A network interface resource attached to an instance.
"kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
"aliasIpRanges": [ # An array of alias IP ranges for this network interface. You can only specify this field for network interfaces in VPC networks.
{ # An alias IP range attached to an instance's network interface.
"subnetworkRangeName": "A String", # The name of a subnetwork secondary IP range from which to allocate an IP alias range. If not specified, the primary range of the subnetwork is used.
"ipCidrRange": "A String", # The IP alias ranges to allocate for this interface. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (such as 10.2.3.4), a netmask (such as /24) or a CIDR-formatted string (such as 10.1.2.0/24).
},
],
"network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
#
# If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
# - projects/project/global/networks/network
# - global/networks/default
"accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
},
],
"networkIP": "A String", # An IPv4 internal IP address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
"fingerprint": "A String", # Fingerprint hash of contents stored in this network interface. This field will be ignored when inserting an Instance or adding a NetworkInterface. An up-to-date fingerprint must be provided in order to update the NetworkInterface, otherwise the request will fail with error 412 conditionNotMet.
"subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not specify this field. If the network is in auto subnet mode, specifying the subnetwork is optional. If the network is in custom subnet mode, specifying the subnetwork is required. If you specify this field, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
# - regions/region/subnetworks/subnetwork
"name": "A String", # [Output Only] The name of the network interface, which is generated by the server. For network devices, these are eth0, eth1, etc.
},
],
"startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
"shieldedInstanceConfig": { # A set of Shielded Instance options.
"enableVtpm": True or False, # Defines whether the instance has the vTPM enabled.
"enableIntegrityMonitoring": True or False, # Defines whether the instance has integrity monitoring enabled.
"enableSecureBoot": True or False, # Defines whether the instance has Secure Boot enabled.
},
"zone": "A String", # [Output Only] URL of the zone where the instance resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"hostname": "A String", # Specifies the hostname of the instance. The specified hostname must be RFC1035 compliant. If hostname is not specified, the default hostname is [INSTANCE_NAME].c.[PROJECT_ID].internal when using the global DNS, and [INSTANCE_NAME].[ZONE].c.[PROJECT_ID].internal when using zonal DNS.
"shieldedInstanceIntegrityPolicy": { # The policy describes the baseline against which Instance boot integrity is measured.
"updateAutoLearnPolicy": True or False, # Updates the integrity policy baseline using the measurements from the VM instance's most recent boot.
},
"statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
"metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
"items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
{
"value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
"key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
},
],
"kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve the resource.
},
"cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
"deletionProtection": True or False, # Whether the resource should be protected against deletion.
"canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"tags": { # A set of instance tags. # Tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035. Multiple tags can be specified via the 'tags.items' field.
"items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
"A String",
],
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the tags' contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update tags. You must always provide an up-to-date fingerprint hash in order to update or change tags.
#
# To see the latest fingerprint, make get() request to the instance.
},
"labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the label's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels.
#
# To see the latest fingerprint, make get() request to the instance.
"machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
# zones/us-central1-f/machineTypes/n1-standard-1
#
#
# To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
# zones/zone/machineTypes/custom-CPUS-MEMORY
#
#
# For example: zones/us-central1-f/machineTypes/custom-4-5120
#
# For a full list of restrictions, read the Specifications for custom machine types.
"kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
{ # An instance-attached disk resource.
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
#
# If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
#
# If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
#
# If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
#
# If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disk-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
"kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
"initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
"sourceSnapshot": "A String", # The source snapshot to create this disk. When creating a new instance, one of initializeParams.sourceSnapshot or initializeParams.sourceImage or disks.source is required except for local SSD.
#
# To create a disk with a snapshot that you created, specify the snapshot name in the following format:
# global/snapshots/my-backup
#
#
# If the source snapshot is deleted later, this field will not be set.
"diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance. If the disk with the instance name exists already in the given zone/region, a new name will be automatically generated.
"description": "A String", # An optional description. Provide this property when creating the disk.
"labels": { # Labels to apply to this disk. These can be later modified by the disks.setLabels method. This field is only applicable for persistent disks.
"a_key": "A String",
},
"sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
# https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
#
#
# Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
# - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
# - projects/project/zones/zone/diskTypes/diskType
# - zones/zone/diskTypes/diskType Note that for InstanceTemplate, this is the name of the disk type, not URL.
"diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB. The size must be at least 10 GB. If you specify a sourceImage, which is required for boot disks, the default size is the size of the sourceImage. If you do not specify a sourceImage, the default disk size is 500 GB.
"resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations. Specified using the full or partial URL. For instance template, specify only the resource policy name.
"A String",
],
"sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
# projects/debian-cloud/global/images/family/debian-9
#
#
# Alternatively, use a specific version of a public operating system image:
# projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
#
#
# To create a disk with a custom image that you created, specify the image name in the following format:
# global/images/my-custom-image
#
#
# You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
# global/images/family/my-image-family
#
#
# If the source image is deleted later, this field will not be set.
"sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
},
"autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
"index": 42, # [Output Only] A zero-based index to this disk, where 0 is reserved for the boot disk. If you have many disks attached to an instance, each disk would have a unique index number.
"boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
"guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read Enabling guest operating system features to see a list of available options.
{ # Guest OS features.
"type": "A String", # The ID of a supported feature. Read Enabling guest operating system features to see a list of available options.
},
],
"diskSizeGb": "A String", # The size of the disk in GB.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance. TODO(b/131765817): Update documentation when NVME is supported.
"licenses": [ # [Output Only] Any valid publicly visible licenses.
"A String",
],
"type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
#
# Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
getGuestAttributes(project=*, zone=*, instance=*, variableKey=None, queryPath=None)
Returns the specified guest attributes entry.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
variableKey: string, Specifies the key for the guest attributes entry.
queryPath: string, Specifies the guest attributes path to be queried.
Returns:
An object of the form:
{ # A guest attributes entry.
"kind": "compute#guestAttributes", # [Output Only] Type of the resource. Always compute#guestAttributes for guest attributes entry.
"variableKey": "A String", # The key to search for.
"queryValue": { # Array of guest attribute namespace/key/value tuples. # [Output Only] The value of the requested queried path.
"items": [
{ # A guest attributes namespace/key/value entry.
"namespace": "A String", # Namespace for the guest attribute entry.
"value": "A String", # Value for the guest attribute entry.
"key": "A String", # Key for the guest attribute entry.
},
],
},
"variableValue": "A String", # [Output Only] The value found for the requested key.
"queryPath": "A String", # The path to be queried. This can be the default namespace ('/') or a nested namespace ('/\/') or a specified key ('/\/\')
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
getIamPolicy(project=*, zone=*, resource=*)
Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
resource: string, Name or id of the resource for this request. (required)
Returns:
An object of the form:
{ # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources.
#
#
#
# A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role.
#
# Optionally, a `binding` can specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both.
#
# **JSON example:**
#
# { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 }
#
# **YAML example:**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3
#
# For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
#
# For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"ignoreChildExemptions": True or False,
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
"field": "A String", # The field value to attribute.
"customFields": [ # Custom fields.
{ # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
"name": "A String", # Name is the field name.
"value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
},
],
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Specifies the format of the policy.
#
# Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected.
#
# Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations:
#
# * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
#
# If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
# * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding.
#
# * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding.
#
# * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# Example (Comparison):
#
# title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100"
#
# Example (Equality):
#
# title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email"
#
# Example (Logic):
#
# title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'"
#
# Example (Data Manipulation):
#
# title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)"
#
# The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
}
getSerialPortOutput(project=*, zone=*, instance=*, start=None, port=None)
Returns the last 1 MB of serial port output from the specified instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
start: string, Returns output starting from a specific byte position. Use this to page through output when the output is too large to return in a single request. For the initial request, leave this field unspecified. For subsequent calls, this field should be set to the next value returned in the previous call.
port: integer, Specifies which COM or serial port to retrieve data from.
Returns:
An object of the form:
{ # An instance's serial console output.
"start": "A String", # The starting byte position of the output that was returned. This should match the start parameter sent with the request. If the serial console output exceeds the size of the buffer, older output will be overwritten by newer content and the start values will be mismatched.
"kind": "compute#serialPortOutput", # [Output Only] Type of the resource. Always compute#serialPortOutput for serial port output.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
"contents": "A String", # [Output Only] The contents of the console output.
"next": "A String", # [Output Only] The position of the next byte of content from the serial console output. Use this value in the next request as the start parameter.
}
getShieldedInstanceIdentity(project=*, zone=*, instance=*)
Returns the Shielded Instance Identity of an instance
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name or id of the instance scoping this request. (required)
Returns:
An object of the form:
{ # A shielded Instance identity entry.
"signingKey": { # A Shielded Instance Identity Entry. # An Attestation Key (AK) made by the RSA 2048 algorithm issued to the Shielded Instance's vTPM.
"ekPub": "A String", # A PEM-encoded public key.
"ekCert": "A String", # A PEM-encoded X.509 certificate. This field can be empty.
},
"kind": "compute#shieldedInstanceIdentity", # [Output Only] Type of the resource. Always compute#shieldedInstanceIdentity for shielded Instance identity entry.
"encryptionKey": { # A Shielded Instance Identity Entry. # An Endorsement Key (EK) made by the RSA 2048 algorithm issued to the Shielded Instance's vTPM.
"ekPub": "A String", # A PEM-encoded public key.
"ekCert": "A String", # A PEM-encoded X.509 certificate. This field can be empty.
},
}
insert(project=*, zone=*, body=None, sourceInstanceTemplate=None, requestId=None)
Creates an instance resource in the specified project using the data included in the request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
body: object, The request body.
The object takes the form of:
{ # Represents an Instance resource.
#
# An instance is a virtual machine that is hosted on Google Cloud Platform. For more information, read Virtual Machine Instances. (== resource_for {$api_version}.instances ==)
"status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, STOPPED, SUSPENDING, SUSPENDED, and TERMINATED.
"reservationAffinity": { # Specifies the reservations that this instance can consume from. # Specifies the reservations that this instance can consume from.
"values": [ # Corresponds to the label values of a reservation resource.
"A String",
],
"key": "A String", # Corresponds to the label key of a reservation resource. To target a SPECIFIC_RESERVATION by name, specify googleapis.com/reservation-name as the key and specify the name of your reservation as its value.
"consumeReservationType": "A String", # Specifies the type of reservation from which this instance can consume resources: ANY_RESERVATION (default), SPECIFIC_RESERVATION, or NO_RESERVATION. See Consuming reserved instances for examples.
},
"guestAccelerators": [ # A list of the type and count of accelerator cards attached to the instance.
{ # A specification of the type and number of accelerator cards attached to the instance.
"acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
"acceleratorType": "A String", # Full or partial URL of the accelerator type resource to attach to this instance. For example: projects/my-project/zones/us-central1-c/acceleratorTypes/nvidia-tesla-p100 If you are creating an instance template, specify only the accelerator name. See GPUs on Compute Engine for a full list of accelerator types.
},
],
"labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
"a_key": "A String",
},
"displayDevice": { # A set of Display Device options # Enables display device for the instance.
"enableDisplay": True or False, # Defines whether the instance has Display enabled.
},
"scheduling": { # Sets the scheduling options for an Instance. NextID: 9 # Sets the scheduling options for this instance.
"preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
"automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
#
# By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
"nodeAffinities": [ # A set of node affinity and anti-affinity configurations. Refer to Configuring node affinity for more information.
{ # Node Affinity: the configuration of desired nodes onto which this Instance could be scheduled.
"operator": "A String", # Defines the operation of node selection. Valid operators are IN for affinity and NOT_IN for anti-affinity.
"values": [ # Corresponds to the label values of Node resource.
"A String",
],
"key": "A String", # Corresponds to the label key of Node resource.
},
],
"onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
},
"minCpuPlatform": "A String", # Specifies a minimum CPU platform for the VM instance. Applicable values are the friendly names of CPU platforms, such as minCpuPlatform: "Intel Haswell" or minCpuPlatform: "Intel Sandy Bridge".
"serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
#
# Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
{ # A service account.
"scopes": [ # The list of scopes to be made available for this service account.
"A String",
],
"email": "A String", # Email address of the service account.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"networkInterfaces": [ # An array of network configurations for this instance. These specify how interfaces are configured to interact with other network services, such as connecting to the internet. Multiple interfaces are supported per instance.
{ # A network interface resource attached to an instance.
"kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
"aliasIpRanges": [ # An array of alias IP ranges for this network interface. You can only specify this field for network interfaces in VPC networks.
{ # An alias IP range attached to an instance's network interface.
"subnetworkRangeName": "A String", # The name of a subnetwork secondary IP range from which to allocate an IP alias range. If not specified, the primary range of the subnetwork is used.
"ipCidrRange": "A String", # The IP alias ranges to allocate for this interface. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (such as 10.2.3.4), a netmask (such as /24) or a CIDR-formatted string (such as 10.1.2.0/24).
},
],
"network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
#
# If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
# - projects/project/global/networks/network
# - global/networks/default
"accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
},
],
"networkIP": "A String", # An IPv4 internal IP address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
"fingerprint": "A String", # Fingerprint hash of contents stored in this network interface. This field will be ignored when inserting an Instance or adding a NetworkInterface. An up-to-date fingerprint must be provided in order to update the NetworkInterface, otherwise the request will fail with error 412 conditionNotMet.
"subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not specify this field. If the network is in auto subnet mode, specifying the subnetwork is optional. If the network is in custom subnet mode, specifying the subnetwork is required. If you specify this field, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
# - regions/region/subnetworks/subnetwork
"name": "A String", # [Output Only] The name of the network interface, which is generated by the server. For network devices, these are eth0, eth1, etc.
},
],
"startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
"shieldedInstanceConfig": { # A set of Shielded Instance options.
"enableVtpm": True or False, # Defines whether the instance has the vTPM enabled.
"enableIntegrityMonitoring": True or False, # Defines whether the instance has integrity monitoring enabled.
"enableSecureBoot": True or False, # Defines whether the instance has Secure Boot enabled.
},
"zone": "A String", # [Output Only] URL of the zone where the instance resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"hostname": "A String", # Specifies the hostname of the instance. The specified hostname must be RFC1035 compliant. If hostname is not specified, the default hostname is [INSTANCE_NAME].c.[PROJECT_ID].internal when using the global DNS, and [INSTANCE_NAME].[ZONE].c.[PROJECT_ID].internal when using zonal DNS.
"shieldedInstanceIntegrityPolicy": { # The policy describes the baseline against which Instance boot integrity is measured.
"updateAutoLearnPolicy": True or False, # Updates the integrity policy baseline using the measurements from the VM instance's most recent boot.
},
"statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
"metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
"items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
{
"value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
"key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
},
],
"kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve the resource.
},
"cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
"deletionProtection": True or False, # Whether the resource should be protected against deletion.
"canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"tags": { # A set of instance tags. # Tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035. Multiple tags can be specified via the 'tags.items' field.
"items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
"A String",
],
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the tags' contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update tags. You must always provide an up-to-date fingerprint hash in order to update or change tags.
#
# To see the latest fingerprint, make get() request to the instance.
},
"labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the label's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels.
#
# To see the latest fingerprint, make get() request to the instance.
"machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
# zones/us-central1-f/machineTypes/n1-standard-1
#
#
# To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
# zones/zone/machineTypes/custom-CPUS-MEMORY
#
#
# For example: zones/us-central1-f/machineTypes/custom-4-5120
#
# For a full list of restrictions, read the Specifications for custom machine types.
"kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
{ # An instance-attached disk resource.
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
#
# If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
#
# If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
#
# If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
#
# If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disk-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
"kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
"initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
"sourceSnapshot": "A String", # The source snapshot to create this disk. When creating a new instance, one of initializeParams.sourceSnapshot or initializeParams.sourceImage or disks.source is required except for local SSD.
#
# To create a disk with a snapshot that you created, specify the snapshot name in the following format:
# global/snapshots/my-backup
#
#
# If the source snapshot is deleted later, this field will not be set.
"diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance. If the disk with the instance name exists already in the given zone/region, a new name will be automatically generated.
"description": "A String", # An optional description. Provide this property when creating the disk.
"labels": { # Labels to apply to this disk. These can be later modified by the disks.setLabels method. This field is only applicable for persistent disks.
"a_key": "A String",
},
"sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
# https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
#
#
# Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
# - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
# - projects/project/zones/zone/diskTypes/diskType
# - zones/zone/diskTypes/diskType Note that for InstanceTemplate, this is the name of the disk type, not URL.
"diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB. The size must be at least 10 GB. If you specify a sourceImage, which is required for boot disks, the default size is the size of the sourceImage. If you do not specify a sourceImage, the default disk size is 500 GB.
"resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations. Specified using the full or partial URL. For instance template, specify only the resource policy name.
"A String",
],
"sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
# projects/debian-cloud/global/images/family/debian-9
#
#
# Alternatively, use a specific version of a public operating system image:
# projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
#
#
# To create a disk with a custom image that you created, specify the image name in the following format:
# global/images/my-custom-image
#
#
# You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
# global/images/family/my-image-family
#
#
# If the source image is deleted later, this field will not be set.
"sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
},
"autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
"index": 42, # [Output Only] A zero-based index to this disk, where 0 is reserved for the boot disk. If you have many disks attached to an instance, each disk would have a unique index number.
"boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
"guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read Enabling guest operating system features to see a list of available options.
{ # Guest OS features.
"type": "A String", # The ID of a supported feature. Read Enabling guest operating system features to see a list of available options.
},
],
"diskSizeGb": "A String", # The size of the disk in GB.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance. TODO(b/131765817): Update documentation when NVME is supported.
"licenses": [ # [Output Only] Any valid publicly visible licenses.
"A String",
],
"type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
#
# Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
sourceInstanceTemplate: string, Specifies instance template to create the instance.
This field is optional. It can be a full or partial URL. For example, the following are all valid URLs to an instance template:
- https://www.googleapis.com/compute/v1/projects/project/global/instanceTemplates/instanceTemplate
- projects/project/global/instanceTemplates/instanceTemplate
- global/instanceTemplates/instanceTemplate
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
list(project=*, zone=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves the list of instances contained within the specified zone.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
Returns:
An object of the form:
{ # Contains a list of instances.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#instanceList", # [Output Only] Type of resource. Always compute#instanceList for lists of Instance resources.
"items": [ # A list of Instance resources.
{ # Represents an Instance resource.
#
# An instance is a virtual machine that is hosted on Google Cloud Platform. For more information, read Virtual Machine Instances. (== resource_for {$api_version}.instances ==)
"status": "A String", # [Output Only] The status of the instance. One of the following values: PROVISIONING, STAGING, RUNNING, STOPPING, STOPPED, SUSPENDING, SUSPENDED, and TERMINATED.
"reservationAffinity": { # Specifies the reservations that this instance can consume from. # Specifies the reservations that this instance can consume from.
"values": [ # Corresponds to the label values of a reservation resource.
"A String",
],
"key": "A String", # Corresponds to the label key of a reservation resource. To target a SPECIFIC_RESERVATION by name, specify googleapis.com/reservation-name as the key and specify the name of your reservation as its value.
"consumeReservationType": "A String", # Specifies the type of reservation from which this instance can consume resources: ANY_RESERVATION (default), SPECIFIC_RESERVATION, or NO_RESERVATION. See Consuming reserved instances for examples.
},
"guestAccelerators": [ # A list of the type and count of accelerator cards attached to the instance.
{ # A specification of the type and number of accelerator cards attached to the instance.
"acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
"acceleratorType": "A String", # Full or partial URL of the accelerator type resource to attach to this instance. For example: projects/my-project/zones/us-central1-c/acceleratorTypes/nvidia-tesla-p100 If you are creating an instance template, specify only the accelerator name. See GPUs on Compute Engine for a full list of accelerator types.
},
],
"labels": { # Labels to apply to this instance. These can be later modified by the setLabels method.
"a_key": "A String",
},
"displayDevice": { # A set of Display Device options # Enables display device for the instance.
"enableDisplay": True or False, # Defines whether the instance has Display enabled.
},
"scheduling": { # Sets the scheduling options for an Instance. NextID: 9 # Sets the scheduling options for this instance.
"preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
"automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
#
# By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
"nodeAffinities": [ # A set of node affinity and anti-affinity configurations. Refer to Configuring node affinity for more information.
{ # Node Affinity: the configuration of desired nodes onto which this Instance could be scheduled.
"operator": "A String", # Defines the operation of node selection. Valid operators are IN for affinity and NOT_IN for anti-affinity.
"values": [ # Corresponds to the label values of Node resource.
"A String",
],
"key": "A String", # Corresponds to the label key of Node resource.
},
],
"onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
},
"minCpuPlatform": "A String", # Specifies a minimum CPU platform for the VM instance. Applicable values are the friendly names of CPU platforms, such as minCpuPlatform: "Intel Haswell" or minCpuPlatform: "Intel Sandy Bridge".
"serviceAccounts": [ # A list of service accounts, with their specified scopes, authorized for this instance. Only one service account per VM instance is supported.
#
# Service accounts generate access tokens that can be accessed through the metadata server and used to authenticate applications on the instance. See Service Accounts for more information.
{ # A service account.
"scopes": [ # The list of scopes to be made available for this service account.
"A String",
],
"email": "A String", # Email address of the service account.
},
],
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"networkInterfaces": [ # An array of network configurations for this instance. These specify how interfaces are configured to interact with other network services, such as connecting to the internet. Multiple interfaces are supported per instance.
{ # A network interface resource attached to an instance.
"kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
"aliasIpRanges": [ # An array of alias IP ranges for this network interface. You can only specify this field for network interfaces in VPC networks.
{ # An alias IP range attached to an instance's network interface.
"subnetworkRangeName": "A String", # The name of a subnetwork secondary IP range from which to allocate an IP alias range. If not specified, the primary range of the subnetwork is used.
"ipCidrRange": "A String", # The IP alias ranges to allocate for this interface. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (such as 10.2.3.4), a netmask (such as /24) or a CIDR-formatted string (such as 10.1.2.0/24).
},
],
"network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
#
# If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
# - projects/project/global/networks/network
# - global/networks/default
"accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
},
],
"networkIP": "A String", # An IPv4 internal IP address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
"fingerprint": "A String", # Fingerprint hash of contents stored in this network interface. This field will be ignored when inserting an Instance or adding a NetworkInterface. An up-to-date fingerprint must be provided in order to update the NetworkInterface, otherwise the request will fail with error 412 conditionNotMet.
"subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not specify this field. If the network is in auto subnet mode, specifying the subnetwork is optional. If the network is in custom subnet mode, specifying the subnetwork is required. If you specify this field, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
# - regions/region/subnetworks/subnetwork
"name": "A String", # [Output Only] The name of the network interface, which is generated by the server. For network devices, these are eth0, eth1, etc.
},
],
"startRestricted": True or False, # [Output Only] Whether a VM has been restricted for start because Compute Engine has detected suspicious activity.
"shieldedInstanceConfig": { # A set of Shielded Instance options.
"enableVtpm": True or False, # Defines whether the instance has the vTPM enabled.
"enableIntegrityMonitoring": True or False, # Defines whether the instance has integrity monitoring enabled.
"enableSecureBoot": True or False, # Defines whether the instance has Secure Boot enabled.
},
"zone": "A String", # [Output Only] URL of the zone where the instance resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
"hostname": "A String", # Specifies the hostname of the instance. The specified hostname must be RFC1035 compliant. If hostname is not specified, the default hostname is [INSTANCE_NAME].c.[PROJECT_ID].internal when using the global DNS, and [INSTANCE_NAME].[ZONE].c.[PROJECT_ID].internal when using zonal DNS.
"shieldedInstanceIntegrityPolicy": { # The policy describes the baseline against which Instance boot integrity is measured.
"updateAutoLearnPolicy": True or False, # Updates the integrity policy baseline using the measurements from the VM instance's most recent boot.
},
"statusMessage": "A String", # [Output Only] An optional, human-readable explanation of the status.
"metadata": { # A metadata key/value entry. # The metadata key/value pairs assigned to this instance. This includes custom metadata and predefined keys.
"items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
{
"value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
"key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
},
],
"kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve the resource.
},
"cpuPlatform": "A String", # [Output Only] The CPU platform used by this instance.
"deletionProtection": True or False, # Whether the resource should be protected against deletion.
"canIpForward": True or False, # Allows this instance to send and receive packets with non-matching destination or source IPs. This is required if you plan to use this instance to forward routes. For more information, see Enabling IP Forwarding.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource.
"tags": { # A set of instance tags. # Tags to apply to this instance. Tags are used to identify valid sources or targets for network firewalls and are specified by the client during instance creation. The tags can be later modified by the setTags method. Each tag within the list must comply with RFC1035. Multiple tags can be specified via the 'tags.items' field.
"items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
"A String",
],
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the tags' contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update tags. You must always provide an up-to-date fingerprint hash in order to update or change tags.
#
# To see the latest fingerprint, make get() request to the instance.
},
"labelFingerprint": "A String", # A fingerprint for this request, which is essentially a hash of the label's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels.
#
# To see the latest fingerprint, make get() request to the instance.
"machineType": "A String", # Full or partial URL of the machine type resource to use for this instance, in the format: zones/zone/machineTypes/machine-type. This is provided by the client when the instance is created. For example, the following is a valid partial url to a predefined machine type:
# zones/us-central1-f/machineTypes/n1-standard-1
#
#
# To create a custom machine type, provide a URL to a machine type in the following format, where CPUS is 1 or an even number up to 32 (2, 4, 6, ... 24, etc), and MEMORY is the total memory for this instance. Memory must be a multiple of 256 MB and must be supplied in MB (e.g. 5 GB of memory is 5120 MB):
# zones/zone/machineTypes/custom-CPUS-MEMORY
#
#
# For example: zones/us-central1-f/machineTypes/custom-4-5120
#
# For a full list of restrictions, read the Specifications for custom machine types.
"kind": "compute#instance", # [Output Only] Type of the resource. Always compute#instance for instances.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The resource name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
"disks": [ # Array of disks associated with this instance. Persistent disks must be created before you can assign them.
{ # An instance-attached disk resource.
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts or decrypts a disk using a customer-supplied encryption key.
#
# If you are creating a new disk, this field encrypts the new disk using an encryption key that you provide. If you are attaching an existing disk that is already encrypted, this field decrypts the disk using the customer-supplied encryption key.
#
# If you encrypt a disk using a customer-supplied key, you must provide the same key again when you attempt to use this resource at a later time. For example, you must provide the key when you create a snapshot or an image from the disk or when you attach the disk to a virtual machine instance.
#
# If you do not provide an encryption key, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot use your own keys to encrypt disks in a managed instance group.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"deviceName": "A String", # Specifies a unique device name of your choice that is reflected into the /dev/disk/by-id/google-* tree of a Linux operating system running within the instance. This name can be used to reference the device for mounting, resizing, and so on, from within the instance.
#
# If not specified, the server chooses a default device name to apply to this disk, in the form persistent-disk-x, where x is a number assigned by Google Compute Engine. This field is only applicable for persistent disks.
"kind": "compute#attachedDisk", # [Output Only] Type of the resource. Always compute#attachedDisk for attached disks.
"initializeParams": { # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance. # [Input Only] Specifies the parameters for a new disk that will be created alongside the new instance. Use initialization parameters to create boot disks or local SSDs attached to the new instance.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
#
# This property is mutually exclusive with the source property; you can only define one or the other, but not both.
"sourceSnapshot": "A String", # The source snapshot to create this disk. When creating a new instance, one of initializeParams.sourceSnapshot or initializeParams.sourceImage or disks.source is required except for local SSD.
#
# To create a disk with a snapshot that you created, specify the snapshot name in the following format:
# global/snapshots/my-backup
#
#
# If the source snapshot is deleted later, this field will not be set.
"diskName": "A String", # Specifies the disk name. If not specified, the default is to use the name of the instance. If the disk with the instance name exists already in the given zone/region, a new name will be automatically generated.
"description": "A String", # An optional description. Provide this property when creating the disk.
"labels": { # Labels to apply to this disk. These can be later modified by the disks.setLabels method. This field is only applicable for persistent disks.
"a_key": "A String",
},
"sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
#
# Instance templates do not store customer-supplied encryption keys, so you cannot create disks for instances in a managed instance group if the source images are encrypted with your own keys.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"diskType": "A String", # Specifies the disk type to use to create the instance. If not specified, the default is pd-standard, specified using the full URL. For example:
# https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/pd-standard
#
#
# Other values include pd-ssd and local-ssd. If you define this field, you can provide either the full or partial URL. For example, the following are valid values:
# - https://www.googleapis.com/compute/v1/projects/project/zones/zone/diskTypes/diskType
# - projects/project/zones/zone/diskTypes/diskType
# - zones/zone/diskTypes/diskType Note that for InstanceTemplate, this is the name of the disk type, not URL.
"diskSizeGb": "A String", # Specifies the size of the disk in base-2 GB. The size must be at least 10 GB. If you specify a sourceImage, which is required for boot disks, the default size is the size of the sourceImage. If you do not specify a sourceImage, the default disk size is 500 GB.
"resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations. Specified using the full or partial URL. For instance template, specify only the resource policy name.
"A String",
],
"sourceImage": "A String", # The source image to create this disk. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
# projects/debian-cloud/global/images/family/debian-9
#
#
# Alternatively, use a specific version of a public operating system image:
# projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
#
#
# To create a disk with a custom image that you created, specify the image name in the following format:
# global/images/my-custom-image
#
#
# You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
# global/images/family/my-image-family
#
#
# If the source image is deleted later, this field will not be set.
"sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
},
"autoDelete": True or False, # Specifies whether the disk will be auto-deleted when the instance is deleted (but not when the disk is detached from the instance).
"index": 42, # [Output Only] A zero-based index to this disk, where 0 is reserved for the boot disk. If you have many disks attached to an instance, each disk would have a unique index number.
"boot": True or False, # Indicates that this is a boot disk. The virtual machine will use the first partition of the disk for its root filesystem.
"guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read Enabling guest operating system features to see a list of available options.
{ # Guest OS features.
"type": "A String", # The ID of a supported feature. Read Enabling guest operating system features to see a list of available options.
},
],
"diskSizeGb": "A String", # The size of the disk in GB.
"mode": "A String", # The mode in which to attach this disk, either READ_WRITE or READ_ONLY. If not specified, the default is to attach the disk in READ_WRITE mode.
"interface": "A String", # Specifies the disk interface to use for attaching this disk, which is either SCSI or NVME. The default is SCSI. Persistent disks must always use SCSI and the request will fail if you attempt to attach a persistent disk in any other format than SCSI. Local SSDs can use either NVME or SCSI. For performance characteristics of SCSI over NVMe, see Local SSD performance. TODO(b/131765817): Update documentation when NVME is supported.
"licenses": [ # [Output Only] Any valid publicly visible licenses.
"A String",
],
"type": "A String", # Specifies the type of the disk, either SCRATCH or PERSISTENT. If not specified, the default is PERSISTENT.
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. When creating a new instance, one of initializeParams.sourceImage or initializeParams.sourceSnapshot or disks.source is required except for local SSD.
#
# If desired, you can also attach existing non-root persistent disks using this property. This field is only applicable for persistent disks.
#
# Note that for InstanceTemplate, specify the disk name, not the URL for the disk.
},
],
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
},
],
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
listReferrers(project=*, zone=*, instance=*, orderBy=None, filter=None, maxResults=None, pageToken=None)
Retrieves the list of referrers to instances contained within the specified zone. For more information, read Viewing Referrers to VM Instances.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the target instance scoping this request, or '-' if the request should span over all instances in the container. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
Returns:
An object of the form:
{ # Contains a list of instance referrers.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#instanceListReferrers", # [Output Only] Type of resource. Always compute#instanceListReferrers for lists of Instance referrers.
"items": [ # A list of Reference resources.
{ # Represents a reference to a resource.
"referrer": "A String", # URL of the resource which refers to the target.
"kind": "compute#reference", # [Output Only] Type of the resource. Always compute#reference for references.
"referenceType": "A String", # A description of the reference type with no implied semantics. Possible values include:
# - MEMBER_OF
"target": "A String", # URL of the resource to which this reference points.
},
],
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}
listReferrers_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
list_next(previous_request=*, previous_response=*)
Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
reset(project=*, zone=*, instance=*, requestId=None)
Performs a reset on the instance. This is a hard reset the VM does not do a graceful shutdown. For more information, see Resetting an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setDeletionProtection(project=*, zone=*, resource=*, deletionProtection=None, requestId=None)
Sets deletion protection on the instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
resource: string, Name or id of the resource for this request. (required)
deletionProtection: boolean, Whether the resource should be protected against deletion.
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setDiskAutoDelete(project=*, zone=*, instance=*, autoDelete=*, deviceName=*, requestId=None)
Sets the auto-delete flag for a disk attached to an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
autoDelete: boolean, Whether to auto-delete the disk when the instance is deleted. (required)
deviceName: string, The device name of the disk to modify. Make a get() request on the instance to view currently attached disks and device names. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setIamPolicy(project=*, zone=*, resource=*, body=None)
Sets the access control policy on the specified resource. Replaces any existing policy.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body.
The object takes the form of:
{
"policy": { # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources. # REQUIRED: The complete policy to be applied to the 'resource'. The size of the policy is limited to a few 10s of KB. An empty policy is in general a valid policy but certain services (like Projects) might reject them.
#
#
#
# A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role.
#
# Optionally, a `binding` can specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both.
#
# **JSON example:**
#
# { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 }
#
# **YAML example:**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3
#
# For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
#
# For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"ignoreChildExemptions": True or False,
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
"field": "A String", # The field value to attribute.
"customFields": [ # Custom fields.
{ # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
"name": "A String", # Name is the field name.
"value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
},
],
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Specifies the format of the policy.
#
# Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected.
#
# Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations:
#
# * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
#
# If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
# * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding.
#
# * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding.
#
# * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# Example (Comparison):
#
# title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100"
#
# Example (Equality):
#
# title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email"
#
# Example (Logic):
#
# title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'"
#
# Example (Data Manipulation):
#
# title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)"
#
# The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
},
"bindings": [ # Flatten Policy to create a backwacd compatible wire-format. Deprecated. Use 'policy' to specify bindings.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
# * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding.
#
# * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding.
#
# * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# Example (Comparison):
#
# title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100"
#
# Example (Equality):
#
# title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email"
#
# Example (Logic):
#
# title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'"
#
# Example (Data Manipulation):
#
# title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)"
#
# The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"etag": "A String", # Flatten Policy to create a backward compatible wire-format. Deprecated. Use 'policy' to specify the etag.
}
Returns:
An object of the form:
{ # An Identity and Access Management (IAM) policy, which specifies access controls for Google Cloud resources.
#
#
#
# A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions; each `role` can be an IAM predefined role or a user-created custom role.
#
# Optionally, a `binding` can specify a `condition`, which is a logical expression that allows access to a resource only if the expression evaluates to `true`. A condition can add constraints based on attributes of the request, the resource, or both.
#
# **JSON example:**
#
# { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ], "etag": "BwWWja0YfJA=", "version": 3 }
#
# **YAML example:**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3
#
# For a description of IAM and its features, see the [IAM documentation](https://cloud.google.com/iam/docs/).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
#
# For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"ignoreChildExemptions": True or False,
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
"field": "A String", # The field value to attribute.
"customFields": [ # Custom fields.
{ # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
"name": "A String", # Name is the field name.
"value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
},
],
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Specifies the format of the policy.
#
# Valid values are `0`, `1`, and `3`. Requests that specify an invalid value are rejected.
#
# Any operation that affects conditional role bindings must specify version `3`. This requirement applies to the following operations:
#
# * Getting a policy that includes a conditional role binding * Adding a conditional role binding to a policy * Changing a conditional role binding in a policy * Removing any role binding, with or without a condition, from a policy that includes conditions
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
#
# If a policy does not include any conditions, operations on that policy may specify any valid version or leave the field unset.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# **Important:** If you use IAM Conditions, you must include the `etag` field whenever you call `setIamPolicy`. If you omit this field, then IAM allows you to overwrite a version `3` policy with a version `1` policy, and all of the conditions in the version `3` policy are lost.
"bindings": [ # Associates a list of `members` to a `role`. Optionally, may specify a `condition` that determines how and when the `bindings` are applied. Each of the `bindings` must contain at least one member.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
# * `deleted:user:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a user that has been recently deleted. For example, `alice@example.com?uid=123456789012345678901`. If the user is recovered, this value reverts to `user:{emailid}` and the recovered user retains the role in the binding.
#
# * `deleted:serviceAccount:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a service account that has been recently deleted. For example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. If the service account is undeleted, this value reverts to `serviceAccount:{emailid}` and the undeleted service account retains the role in the binding.
#
# * `deleted:group:{emailid}?uid={uniqueid}`: An email address (plus unique identifier) representing a Google group that has been recently deleted. For example, `admins@example.com?uid=123456789012345678901`. If the group is recovered, this value reverts to `group:{emailid}` and the recovered group retains the role in the binding.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents a textual expression in the Common Expression Language (CEL) syntax. CEL is a C-like expression language. The syntax and semantics of CEL are documented at https://github.com/google/cel-spec. # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# Example (Comparison):
#
# title: "Summary size limit" description: "Determines if a summary is less than 100 chars" expression: "document.summary.size() < 100"
#
# Example (Equality):
#
# title: "Requestor is owner" description: "Determines if requestor is the document owner" expression: "document.owner == request.auth.claims.email"
#
# Example (Logic):
#
# title: "Public documents" description: "Determine whether the document should be publicly visible" expression: "document.type != 'private' && document.type != 'internal'"
#
# Example (Data Manipulation):
#
# title: "Notification string" description: "Create a notification string with a timestamp." expression: "'New message received at ' + string(document.create_time)"
#
# The exact variables and functions that may be referenced within an expression are determined by the service that evaluates it. See the service documentation for additional information.
"title": "A String", # Optional. Title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
"description": "A String", # Optional. Description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # Optional. String indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
}
setLabels(project=*, zone=*, instance=*, body=None, requestId=None)
Sets labels on an instance. To learn more about labels, read the Labeling Resources documentation.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{
"labelFingerprint": "A String", # Fingerprint of the previous set of labels for this resource, used to prevent conflicts. Provide the latest fingerprint value when making a request to add or change labels.
"labels": {
"a_key": "A String",
},
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setMachineResources(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the number and/or type of accelerator for a stopped instance to the values specified in the request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{
"guestAccelerators": [ # A list of the type and count of accelerator cards attached to the instance.
{ # A specification of the type and number of accelerator cards attached to the instance.
"acceleratorCount": 42, # The number of the guest accelerator cards exposed to this instance.
"acceleratorType": "A String", # Full or partial URL of the accelerator type resource to attach to this instance. For example: projects/my-project/zones/us-central1-c/acceleratorTypes/nvidia-tesla-p100 If you are creating an instance template, specify only the accelerator name. See GPUs on Compute Engine for a full list of accelerator types.
},
],
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setMachineType(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the machine type for a stopped instance to the machine type specified in the request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{
"machineType": "A String", # Full or partial URL of the machine type resource. See Machine Types for a full list of machine types. For example: zones/us-central1-f/machineTypes/n1-standard-1
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setMetadata(project=*, zone=*, instance=*, body=None, requestId=None)
Sets metadata for the specified instance to the data included in the request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # A metadata key/value entry.
"items": [ # Array of key/value pairs. The total size of all keys and values must be less than 512 KB.
{
"value": "A String", # Value for the metadata entry. These are free-form strings, and only have meaning as interpreted by the image running in the instance. The only restriction placed on values is that their size must be less than or equal to 262144 bytes (256 KiB).
"key": "A String", # Key for the metadata entry. Keys must conform to the following regexp: [a-zA-Z0-9-_]+, and be less than 128 bytes in length. This is reflected as part of a URL in the metadata server. Additionally, to avoid ambiguity, keys must not conflict with any other metadata keys for the project.
},
],
"kind": "compute#metadata", # [Output Only] Type of the resource. Always compute#metadata for metadata.
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the metadata's contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update metadata. You must always provide an up-to-date fingerprint hash in order to update or change metadata, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve the resource.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setMinCpuPlatform(project=*, zone=*, instance=*, body=None, requestId=None)
Changes the minimum CPU platform that this instance should use. This method can only be called on a stopped instance. For more information, read Specifying a Minimum CPU Platform.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{
"minCpuPlatform": "A String", # Minimum cpu/platform this instance should be started at.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setScheduling(project=*, zone=*, instance=*, body=None, requestId=None)
Sets an instance's scheduling options.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Instance name for this request. (required)
body: object, The request body.
The object takes the form of:
{ # Sets the scheduling options for an Instance. NextID: 9
"preemptible": True or False, # Defines whether the instance is preemptible. This can only be set during instance creation, it cannot be set or changed after the instance has been created.
"automaticRestart": True or False, # Specifies whether the instance should be automatically restarted if it is terminated by Compute Engine (not terminated by a user). You can only set the automatic restart option for standard instances. Preemptible instances cannot be automatically restarted.
#
# By default, this is set to true so an instance is automatically restarted if it is terminated by Compute Engine.
"nodeAffinities": [ # A set of node affinity and anti-affinity configurations. Refer to Configuring node affinity for more information.
{ # Node Affinity: the configuration of desired nodes onto which this Instance could be scheduled.
"operator": "A String", # Defines the operation of node selection. Valid operators are IN for affinity and NOT_IN for anti-affinity.
"values": [ # Corresponds to the label values of Node resource.
"A String",
],
"key": "A String", # Corresponds to the label key of Node resource.
},
],
"onHostMaintenance": "A String", # Defines the maintenance behavior for this instance. For standard instances, the default behavior is MIGRATE. For preemptible instances, the default and only possible behavior is TERMINATE. For more information, see Setting Instance Scheduling Options.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setServiceAccount(project=*, zone=*, instance=*, body=None, requestId=None)
Sets the service account on the instance. For more information, read Changing the service account and access scopes for an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to start. (required)
body: object, The request body.
The object takes the form of:
{
"scopes": [ # The list of scopes to be made available for this service account.
"A String",
],
"email": "A String", # Email address of the service account.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setShieldedInstanceIntegrityPolicy(project=*, zone=*, instance=*, body=None, requestId=None)
Sets the Shielded Instance integrity policy for an instance. You can only use this method on a running instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name or id of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # The policy describes the baseline against which Instance boot integrity is measured.
"updateAutoLearnPolicy": True or False, # Updates the integrity policy baseline using the measurements from the VM instance's most recent boot.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
setTags(project=*, zone=*, instance=*, body=None, requestId=None)
Sets network tags for the specified instance to the data included in the request.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # A set of instance tags.
"items": [ # An array of tags. Each tag must be 1-63 characters long, and comply with RFC1035.
"A String",
],
"fingerprint": "A String", # Specifies a fingerprint for this request, which is essentially a hash of the tags' contents and used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update tags. You must always provide an up-to-date fingerprint hash in order to update or change tags.
#
# To see the latest fingerprint, make get() request to the instance.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
simulateMaintenanceEvent(project=*, zone=*, instance=*)
Simulates a maintenance event on the instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
start(project=*, zone=*, instance=*, requestId=None)
Starts an instance that was stopped using the instances().stop method. For more information, see Restart an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to start. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
startWithEncryptionKey(project=*, zone=*, instance=*, body=None, requestId=None)
Starts an instance that was stopped using the instances().stop method. For more information, see Restart an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to start. (required)
body: object, The request body.
The object takes the form of:
{
"disks": [ # Array of disks associated with this instance that are protected with a customer-supplied encryption key.
#
# In order to start the instance, the disk url and its corresponding key must be provided.
#
# If the disk is not protected with a customer-supplied encryption key it should not be specified.
{
"diskEncryptionKey": { # Represents a customer-supplied encryption key # Decrypts data associated with the disk with a customer-supplied encryption key.
"rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
"sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
"kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
},
"source": "A String", # Specifies a valid partial or full URL to an existing Persistent Disk resource. This field is only applicable for persistent disks.
},
],
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
stop(project=*, zone=*, instance=*, requestId=None)
Stops a running instance, shutting it down cleanly, and allows you to restart the instance at a later time. Stopped instances do not incur VM usage charges while they are stopped. However, resources that the VM is using, such as persistent disks and static IP addresses, will continue to be charged until they are deleted. For more information, see Stopping an instance.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance resource to stop. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
testIamPermissions(project=*, zone=*, resource=*, body=None)
Returns permissions that a caller has on the specified resource.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body.
The object takes the form of:
{
"permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
"A String",
],
}
Returns:
An object of the form:
{
"permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
"A String",
],
}
updateAccessConfig(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Updates the specified access config from an instance's network interface with the data included in the request. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
networkInterface: string, The name of the network interface where the access config is attached. (required)
body: object, The request body.
The object takes the form of:
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
updateDisplayDevice(project=*, zone=*, instance=*, body=None, requestId=None)
Updates the Display config for a VM instance. You can only use this method on a stopped VM instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # A set of Display Device options
"enableDisplay": True or False, # Defines whether the instance has Display enabled.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
updateNetworkInterface(project=*, zone=*, instance=*, networkInterface=*, body=None, requestId=None)
Updates an instance's network interface. This method follows PATCH semantics.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, The instance name for this request. (required)
networkInterface: string, The name of the network interface to update. (required)
body: object, The request body.
The object takes the form of:
{ # A network interface resource attached to an instance.
"kind": "compute#networkInterface", # [Output Only] Type of the resource. Always compute#networkInterface for network interfaces.
"aliasIpRanges": [ # An array of alias IP ranges for this network interface. You can only specify this field for network interfaces in VPC networks.
{ # An alias IP range attached to an instance's network interface.
"subnetworkRangeName": "A String", # The name of a subnetwork secondary IP range from which to allocate an IP alias range. If not specified, the primary range of the subnetwork is used.
"ipCidrRange": "A String", # The IP alias ranges to allocate for this interface. This IP CIDR range must belong to the specified subnetwork and cannot contain IP addresses reserved by system or used by other network interfaces. This range may be a single IP address (such as 10.2.3.4), a netmask (such as /24) or a CIDR-formatted string (such as 10.1.2.0/24).
},
],
"network": "A String", # URL of the network resource for this instance. When creating an instance, if neither the network nor the subnetwork is specified, the default network global/networks/default is used; if the network is not specified but the subnetwork is specified, the network is inferred.
#
# If you specify this property, you can specify the network as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/global/networks/network
# - projects/project/global/networks/network
# - global/networks/default
"accessConfigs": [ # An array of configurations for this interface. Currently, only one access config, ONE_TO_ONE_NAT, is supported. If there are no accessConfigs specified, then this instance will have no external internet access.
{ # An access configuration attached to an instance's network interface. Only one access config per instance is supported.
"kind": "compute#accessConfig", # [Output Only] Type of the resource. Always compute#accessConfig for access configs.
"name": "A String", # The name of this access configuration. The default and recommended name is External NAT, but you can use any arbitrary string, such as My external IP or Network Access.
"networkTier": "A String", # This signifies the networking tier used for configuring this access configuration and can only take the following values: PREMIUM, STANDARD.
#
# If an AccessConfig is specified without a valid external IP address, an ephemeral IP will be created with this networkTier.
#
# If an AccessConfig with a valid external IP address is specified, it must match that of the networkTier associated with the Address resource owning that IP.
"natIP": "A String", # An external IP address associated with this instance. Specify an unused static external IP address available to the project or leave this field undefined to use an IP from a shared ephemeral IP address pool. If you specify a static external IP address, it must live in the same region as the zone of the instance.
"setPublicPtr": True or False, # Specifies whether a public DNS 'PTR' record should be created to map the external IP address of the instance to a DNS domain name.
"type": "ONE_TO_ONE_NAT", # The type of configuration. The default and only option is ONE_TO_ONE_NAT.
"publicPtrDomainName": "A String", # The DNS domain name for the public PTR record. You can set this field only if the `setPublicPtr` field is enabled.
},
],
"networkIP": "A String", # An IPv4 internal IP address to assign to the instance for this network interface. If not specified by the user, an unused internal IP is assigned by the system.
"fingerprint": "A String", # Fingerprint hash of contents stored in this network interface. This field will be ignored when inserting an Instance or adding a NetworkInterface. An up-to-date fingerprint must be provided in order to update the NetworkInterface, otherwise the request will fail with error 412 conditionNotMet.
"subnetwork": "A String", # The URL of the Subnetwork resource for this instance. If the network resource is in legacy mode, do not specify this field. If the network is in auto subnet mode, specifying the subnetwork is optional. If the network is in custom subnet mode, specifying the subnetwork is required. If you specify this field, you can specify the subnetwork as a full or partial URL. For example, the following are all valid URLs:
# - https://www.googleapis.com/compute/v1/projects/project/regions/region/subnetworks/subnetwork
# - regions/region/subnetworks/subnetwork
"name": "A String", # [Output Only] The name of the network interface, which is generated by the server. For network devices, these are eth0, eth1, etc.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}
updateShieldedInstanceConfig(project=*, zone=*, instance=*, body=None, requestId=None)
Updates the Shielded Instance config for an instance. You can only use this method on a stopped instance. This method supports PATCH semantics and uses the JSON merge patch format and processing rules.
Args:
project: string, Project ID for this request. (required)
zone: string, The name of the zone for this request. (required)
instance: string, Name or id of the instance scoping this request. (required)
body: object, The request body.
The object takes the form of:
{ # A set of Shielded Instance options.
"enableVtpm": True or False, # Defines whether the instance has the vTPM enabled.
"enableIntegrityMonitoring": True or False, # Defines whether the instance has integrity monitoring enabled.
"enableSecureBoot": True or False, # Defines whether the instance has Secure Boot enabled.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# Google Compute Engine has three Operation resources:
#
# * [Global](/compute/docs/reference/rest/latest/globalOperations) * [Regional](/compute/docs/reference/rest/latest/regionOperations) * [Zonal](/compute/docs/reference/rest/latest/zoneOperations)
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for {$api_version}.globalOperations ==) (== resource_for {$api_version}.regionOperations ==) (== resource_for {$api_version}.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the operation.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}