Compute Engine API . disks

Instance Methods

addResourcePolicies(project=*, zone=*, disk=*, body=*, requestId=None)

Adds existing resource policies to a disk. You can only add one policy which will be applied to this disk for scheduling snapshot creation. (== suppress_warning http-rest-shadowed ==)

aggregatedList(project=*, orderBy=None, maxResults=None, pageToken=None, filter=None)

Retrieves an aggregated list of persistent disks. (== suppress_warning http-rest-shadowed ==)

aggregatedList_next(previous_request=*, previous_response=*)

Retrieves the next page of results.

createSnapshot(project=*, zone=*, disk=*, body=*, guestFlush=None, requestId=None)

Creates a snapshot of a specified persistent disk. (== suppress_warning http-rest-shadowed ==)

delete(project=*, zone=*, disk=*, requestId=None)

Deletes the specified persistent disk. Deleting a disk removes its data permanently and is irreversible. However, deleting a disk does not delete any snapshots previously made from the disk. You must separately delete snapshots. (== suppress_warning http-rest-shadowed ==)

get(project=*, zone=*, disk=*)

Returns a specified persistent disk. Gets a list of available persistent disks by making a list() request. (== suppress_warning http-rest-shadowed ==)

getIamPolicy(project=*, zone=*, resource=*)

Gets the access control policy for a resource. May be empty if no such policy or resource exists. (== suppress_warning http-rest-shadowed ==)

insert(project=*, zone=*, body=*, requestId=None, sourceImage=None)

Creates a persistent disk in the specified project using the data in the request. You can create a disk with a sourceImage, a sourceSnapshot, or create an empty 500 GB data disk by omitting all properties. You can also create a disk that is larger than the default size by specifying the sizeGb property. (== suppress_warning http-rest-shadowed ==)

list(project=*, zone=*, orderBy=None, maxResults=None, pageToken=None, filter=None)

Retrieves a list of persistent disks contained within the specified zone. (== suppress_warning http-rest-shadowed ==)

list_next(previous_request=*, previous_response=*)

Retrieves the next page of results.

removeResourcePolicies(project=*, zone=*, disk=*, body=*, requestId=None)

Removes resource policies from a disk. (== suppress_warning http-rest-shadowed ==)

resize(project=*, zone=*, disk=*, body=*, requestId=None)

Resizes the specified persistent disk. You can only increase the size of the disk. (== suppress_warning http-rest-shadowed ==)

setIamPolicy(project=*, zone=*, resource=*, body=*)

Sets the access control policy on the specified resource. Replaces any existing policy. (== suppress_warning http-rest-shadowed ==)

setLabels(project=*, zone=*, resource=*, body=*, requestId=None)

Sets the labels on a disk. To learn more about labels, read the Labeling Resources documentation. (== suppress_warning http-rest-shadowed ==)

testIamPermissions(project=*, zone=*, resource=*, body=*)

Returns permissions that a caller has on the specified resource. (== suppress_warning http-rest-shadowed ==)

Method Details

addResourcePolicies(project=*, zone=*, disk=*, body=*, requestId=None)
Adds existing resource policies to a disk. You can only add one policy which will be applied to this disk for scheduling snapshot creation. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, The disk name for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "resourcePolicies": [ # Resource policies to be added to this disk. Currently you can only specify one policy here.
      "A String",
    ],
  }

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
aggregatedList(project=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves an aggregated list of persistent disks. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.

You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.

Currently, only sorting by name or creationTimestamp desc is supported.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
  pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
  filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.

For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.

You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.

To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).

Returns:
  An object of the form:

    {
    "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
    "kind": "compute#diskAggregatedList", # [Output Only] Type of resource. Always compute#diskAggregatedList for aggregated lists of persistent disks.
    "items": { # A list of DisksScopedList resources.
      "a_key": { # [Output Only] Name of the scope containing this set of disks.
        "disks": [ # [Output Only] A list of disks contained in this scope.
          { # Represents a Persistent Disk resource.
                #
                # Persistent disks are required for running your VM instances. Create both boot and non-boot (data) persistent disks. For more information, read Persistent Disks. For more storage options, read Storage options.
                #
                # The disks resource represents a zonal persistent disk. For more information, read Zonal persistent disks.
                #
                # The regionDisks resource represents a regional persistent disk. For more information, read  Regional resources. (== resource_for beta.disks ==) (== resource_for v1.disks ==) (== resource_for v1.regionDisks ==) (== resource_for beta.regionDisks ==)
              "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
                "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
              },
              "labels": { # Labels to apply to this disk. These can be later modified by the setLabels method.
                "a_key": "A String",
              },
              "guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read  Enabling guest operating system features to see a list of available options.
                { # Guest OS features.
                  "type": "A String", # The ID of a supported feature. Read  Enabling guest operating system features to see a list of available options.
                },
              ],
              "licenses": [ # A list of publicly visible licenses. Reserved for Google's use.
                "A String",
              ],
              "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
              "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
              "licenseCodes": [ # Integer license codes indicating which licenses are attached to this disk.
                "A String",
              ],
              "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts the disk using a customer-supplied encryption key.
                  #
                  # After you encrypt a disk with a customer-supplied key, you must provide the same key if you use the disk later (e.g. to create a disk snapshot, to create a disk image, to create a machine image, or to attach the disk to a virtual machine).
                  #
                  # Customer-supplied encryption keys do not protect access to metadata of the disk.
                  #
                  # If you do not provide an encryption key when creating the disk, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
                "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
              },
              "zone": "A String", # [Output Only] URL of the zone where the disk resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
              "physicalBlockSizeBytes": "A String", # Physical block size of the persistent disk, in bytes. If not present in a request, a default value is used. Currently supported sizes are 4096 and 16384, other sizes may be added in the future. If an unsupported value is requested, the error message will list the supported values for the caller's project.
              "lastAttachTimestamp": "A String", # [Output Only] Last attach timestamp in RFC3339 text format.
              "type": "A String", # URL of the disk type resource describing which disk type to use to create the disk. Provide this when creating the disk. For example: projects/project/zones/zone/diskTypes/pd-standard or pd-ssd
              "status": "A String", # [Output Only] The status of disk creation. CREATING: Disk is provisioning. RESTORING: Source data is being copied into the disk. FAILED: Disk creation failed. READY: Disk is ready for use. DELETING: Disk is deleting.
              "sourceSnapshot": "A String", # The source snapshot used to create this disk. You can provide this as a partial or full URL to the resource. For example, the following are valid values:
                  # - https://www.googleapis.com/compute/v1/projects/project/global/snapshots/snapshot
                  # - projects/project/global/snapshots/snapshot
                  # - global/snapshots/snapshot
              "lastDetachTimestamp": "A String", # [Output Only] Last detach timestamp in RFC3339 text format.
              "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
              "labelFingerprint": "A String", # A fingerprint for the labels being applied to this disk, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet.
                  #
                  # To see the latest fingerprint, make a get() request to retrieve a disk.
              "sourceImageId": "A String", # [Output Only] The ID value of the image used to create this disk. This value identifies the exact image that was used to create this persistent disk. For example, if you created the persistent disk from an image that was later deleted and recreated under the same name, the source image ID would identify the exact version of the image that was used.
              "resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations.
                "A String",
              ],
              "replicaZones": [ # URLs of the zones where the disk should be replicated to. Only applicable for regional resources.
                "A String",
              ],
              "sourceSnapshotId": "A String", # [Output Only] The unique ID of the snapshot used to create this disk. This value identifies the exact snapshot that was used to create this persistent disk. For example, if you created the persistent disk from a snapshot that was later deleted and recreated under the same name, the source snapshot ID would identify the exact version of the snapshot that was used.
              "users": [ # [Output Only] Links to the users of the disk (attached instances) in form: projects/project/zones/zone/instances/instance
                "A String",
              ],
              "kind": "compute#disk", # [Output Only] Type of the resource. Always compute#disk for disks.
              "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
              "sizeGb": "A String", # Size of the persistent disk, specified in GB. You can specify this field when creating a persistent disk using the sourceImage or sourceSnapshot parameter, or specify it alone to create an empty persistent disk.
                  #
                  # If you specify this field along with sourceImage or sourceSnapshot, the value of sizeGb must not be less than the size of the sourceImage or the size of the snapshot. Acceptable values are 1 to 65536, inclusive.
              "region": "A String", # [Output Only] URL of the region where the disk resides. Only applicable for regional resources. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
              "sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot. Required if the source snapshot is protected by a customer-supplied encryption key.
                "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
                "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
                "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
              },
              "options": "A String", # Internal use only.
              "selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
              "sourceImage": "A String", # The source image used to create this disk. If the source image is deleted, this field will not be set.
                  #
                  # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
                  # projects/debian-cloud/global/images/family/debian-9
                  #
                  #
                  # Alternatively, use a specific version of a public operating system image:
                  # projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
                  #
                  #
                  # To create a disk with a custom image that you created, specify the image name in the following format:
                  # global/images/my-custom-image
                  #
                  #
                  # You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
                  # global/images/family/my-image-family
            },
        ],
        "warning": { # [Output Only] Informational warning which replaces the list of disks when the list is empty.
          "message": "A String", # [Output Only] A human-readable description of the warning code.
          "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
          "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
              # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
            {
              "value": "A String", # [Output Only] A warning data value corresponding to the key.
              "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
            },
          ],
        },
      },
    },
    "warning": { # [Output Only] Informational warning message.
      "message": "A String", # [Output Only] A human-readable description of the warning code.
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
          # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        },
      ],
    },
    "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
aggregatedList_next(previous_request=*, previous_response=*)
Retrieves the next page of results.

Args:
  previous_request: The request for the previous page. (required)
  previous_response: The response from the request for the previous page. (required)

Returns:
  A request object that you can call 'execute()' on to request the next
  page. Returns None if there are no more items in the collection.
    
createSnapshot(project=*, zone=*, disk=*, body=*, guestFlush=None, requestId=None)
Creates a snapshot of a specified persistent disk. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, Name of the persistent disk to snapshot. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # Represents a Persistent Disk Snapshot resource.
      # 
      # You can use snapshots to back up data on a regular interval. For more information, read  Creating persistent disk snapshots. (== resource_for beta.snapshots ==) (== resource_for v1.snapshots ==)
    "autoCreated": True or False, # [Output Only] Set to true if snapshots are automatically by applying resource policy on the target disk.
    "status": "A String", # [Output Only] The status of the snapshot. This can be CREATING, DELETING, FAILED, READY, or UPLOADING.
    "kind": "compute#snapshot", # [Output Only] Type of the resource. Always compute#snapshot for Snapshot resources.
    "sourceDiskEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source disk. Required if the source disk is protected by a customer-supplied encryption key.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
    },
    "storageBytes": "A String", # [Output Only] A size of the storage used by the snapshot. As snapshots share storage, this number is expected to change with snapshot creation/deletion.
    "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
    "sourceDisk": "A String", # [Output Only] The source disk used to create this snapshot.
    "snapshotEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts the snapshot using a customer-supplied encryption key.
        # 
        # After you encrypt a snapshot using a customer-supplied key, you must provide the same key if you use the snapshot later. For example, you must provide the encryption key when you create a disk from the encrypted snapshot in a future request.
        # 
        # Customer-supplied encryption keys do not protect access to metadata of the snapshot.
        # 
        # If you do not provide an encryption key when creating the snapshot, then the snapshot will be encrypted using an automatically generated key and you do not need to provide a key to use the snapshot later.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
    },
    "storageBytesStatus": "A String", # [Output Only] An indicator whether storageBytes is in a stable state or it is being adjusted as a result of shared storage reallocation. This status can either be UPDATING, meaning the size of the snapshot is being updated, or UP_TO_DATE, meaning the size of the snapshot is up-to-date.
    "labelFingerprint": "A String", # A fingerprint for the labels being applied to this snapshot, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet.
        # 
        # To see the latest fingerprint, make a get() request to retrieve a snapshot.
    "labels": { # Labels to apply to this snapshot. These can be later modified by the setLabels method. Label values may be empty.
      "a_key": "A String",
    },
    "name": "A String", # Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
    "diskSizeGb": "A String", # [Output Only] Size of the source disk, specified in GB.
    "storageLocations": [ # Cloud Storage bucket storage location of the snapshot (regional or multi-regional).
      "A String",
    ],
    "licenses": [ # [Output Only] A list of public visible licenses that apply to this snapshot. This can be because the original image had licenses attached (such as a Windows image).
      "A String",
    ],
    "sourceDiskId": "A String", # [Output Only] The ID value of the disk used to create this snapshot. This value may be used to determine whether the snapshot was taken from the current or a previous instance of a given disk name.
    "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "licenseCodes": [ # [Output Only] Integer license codes indicating which licenses are attached to this snapshot.
      "A String",
    ],
  }

  guestFlush: boolean, [Input Only] Specifies to create an application consistent snapshot by informing the OS to prepare for the snapshot process. Currently only supported on Windows instances using the Volume Shadow Copy Service (VSS).
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
delete(project=*, zone=*, disk=*, requestId=None)
Deletes the specified persistent disk. Deleting a disk removes its data permanently and is irreversible. However, deleting a disk does not delete any snapshots previously made from the disk. You must separately delete snapshots. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, Name of the persistent disk to delete. (required)
  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
get(project=*, zone=*, disk=*)
Returns a specified persistent disk. Gets a list of available persistent disks by making a list() request. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, Name of the persistent disk to return. (required)

Returns:
  An object of the form:

    { # Represents a Persistent Disk resource.
        #
        # Persistent disks are required for running your VM instances. Create both boot and non-boot (data) persistent disks. For more information, read Persistent Disks. For more storage options, read Storage options.
        #
        # The disks resource represents a zonal persistent disk. For more information, read Zonal persistent disks.
        #
        # The regionDisks resource represents a regional persistent disk. For more information, read  Regional resources. (== resource_for beta.disks ==) (== resource_for v1.disks ==) (== resource_for v1.regionDisks ==) (== resource_for beta.regionDisks ==)
      "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
        "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
        "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
        "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
      },
      "labels": { # Labels to apply to this disk. These can be later modified by the setLabels method.
        "a_key": "A String",
      },
      "guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read  Enabling guest operating system features to see a list of available options.
        { # Guest OS features.
          "type": "A String", # The ID of a supported feature. Read  Enabling guest operating system features to see a list of available options.
        },
      ],
      "licenses": [ # A list of publicly visible licenses. Reserved for Google's use.
        "A String",
      ],
      "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
      "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
      "licenseCodes": [ # Integer license codes indicating which licenses are attached to this disk.
        "A String",
      ],
      "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts the disk using a customer-supplied encryption key.
          #
          # After you encrypt a disk with a customer-supplied key, you must provide the same key if you use the disk later (e.g. to create a disk snapshot, to create a disk image, to create a machine image, or to attach the disk to a virtual machine).
          #
          # Customer-supplied encryption keys do not protect access to metadata of the disk.
          #
          # If you do not provide an encryption key when creating the disk, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
        "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
        "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
        "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
      },
      "zone": "A String", # [Output Only] URL of the zone where the disk resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
      "physicalBlockSizeBytes": "A String", # Physical block size of the persistent disk, in bytes. If not present in a request, a default value is used. Currently supported sizes are 4096 and 16384, other sizes may be added in the future. If an unsupported value is requested, the error message will list the supported values for the caller's project.
      "lastAttachTimestamp": "A String", # [Output Only] Last attach timestamp in RFC3339 text format.
      "type": "A String", # URL of the disk type resource describing which disk type to use to create the disk. Provide this when creating the disk. For example: projects/project/zones/zone/diskTypes/pd-standard or pd-ssd
      "status": "A String", # [Output Only] The status of disk creation. CREATING: Disk is provisioning. RESTORING: Source data is being copied into the disk. FAILED: Disk creation failed. READY: Disk is ready for use. DELETING: Disk is deleting.
      "sourceSnapshot": "A String", # The source snapshot used to create this disk. You can provide this as a partial or full URL to the resource. For example, the following are valid values:
          # - https://www.googleapis.com/compute/v1/projects/project/global/snapshots/snapshot
          # - projects/project/global/snapshots/snapshot
          # - global/snapshots/snapshot
      "lastDetachTimestamp": "A String", # [Output Only] Last detach timestamp in RFC3339 text format.
      "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
      "labelFingerprint": "A String", # A fingerprint for the labels being applied to this disk, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet.
          #
          # To see the latest fingerprint, make a get() request to retrieve a disk.
      "sourceImageId": "A String", # [Output Only] The ID value of the image used to create this disk. This value identifies the exact image that was used to create this persistent disk. For example, if you created the persistent disk from an image that was later deleted and recreated under the same name, the source image ID would identify the exact version of the image that was used.
      "resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations.
        "A String",
      ],
      "replicaZones": [ # URLs of the zones where the disk should be replicated to. Only applicable for regional resources.
        "A String",
      ],
      "sourceSnapshotId": "A String", # [Output Only] The unique ID of the snapshot used to create this disk. This value identifies the exact snapshot that was used to create this persistent disk. For example, if you created the persistent disk from a snapshot that was later deleted and recreated under the same name, the source snapshot ID would identify the exact version of the snapshot that was used.
      "users": [ # [Output Only] Links to the users of the disk (attached instances) in form: projects/project/zones/zone/instances/instance
        "A String",
      ],
      "kind": "compute#disk", # [Output Only] Type of the resource. Always compute#disk for disks.
      "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
      "sizeGb": "A String", # Size of the persistent disk, specified in GB. You can specify this field when creating a persistent disk using the sourceImage or sourceSnapshot parameter, or specify it alone to create an empty persistent disk.
          #
          # If you specify this field along with sourceImage or sourceSnapshot, the value of sizeGb must not be less than the size of the sourceImage or the size of the snapshot. Acceptable values are 1 to 65536, inclusive.
      "region": "A String", # [Output Only] URL of the region where the disk resides. Only applicable for regional resources. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
      "sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot. Required if the source snapshot is protected by a customer-supplied encryption key.
        "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
        "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
        "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
      },
      "options": "A String", # Internal use only.
      "selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
      "sourceImage": "A String", # The source image used to create this disk. If the source image is deleted, this field will not be set.
          #
          # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
          # projects/debian-cloud/global/images/family/debian-9
          #
          #
          # Alternatively, use a specific version of a public operating system image:
          # projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
          #
          #
          # To create a disk with a custom image that you created, specify the image name in the following format:
          # global/images/my-custom-image
          #
          #
          # You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
          # global/images/family/my-image-family
    }
getIamPolicy(project=*, zone=*, resource=*)
Gets the access control policy for a resource. May be empty if no such policy or resource exists. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  resource: string, Name or id of the resource for this request. (required)

Returns:
  An object of the form:

    { # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources.
      #
      #
      #
      # A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions (defined by IAM or configured by users). A `binding` can optionally specify a `condition`, which is a logic expression that further constrains the role binding based on attributes about the request and/or target resource.
      #
      # **JSON Example**
      #
      # { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ] }
      #
      # **YAML Example**
      #
      # bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
      #
      # For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
    "auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
      { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
          #
          # If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
          #
          # Example Policy with multiple AuditConfigs:
          #
          # { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
          #
          # For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
        "exemptedMembers": [
          "A String",
        ],
        "auditLogConfigs": [ # The configuration for logging of each type of permission.
          { # Provides the configuration for logging a type of permissions. Example:
              #
              # { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
              #
              # This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
            "exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
              "A String",
            ],
            "ignoreChildExemptions": True or False,
            "logType": "A String", # The log type that this config enables.
          },
        ],
        "service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
      },
    ],
    "rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
      { # A rule to be applied in a Policy.
        "logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
          { # Specifies what kind of log the caller must write
            "counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
                #
                # Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
                #
                # Field names correspond to IAM request parameters and field values are their respective values.
                #
                # Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
                #
                # Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
                #
                # TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
              "field": "A String", # The field value to attribute.
              "customFields": [ # Custom fields.
                { # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
                  "name": "A String", # Name is the field name.
                  "value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
                },
              ],
              "metric": "A String", # The metric to update.
            },
            "dataAccess": { # Write a Data Access (Gin) log # Data access options.
              "logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
            },
            "cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
              "logName": "A String", # The log_name to populate in the Cloud Audit Record.
              "authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
                "permissionType": "A String", # The type of the permission that was checked.
              },
            },
          },
        ],
        "notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
          "A String",
        ],
        "ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
          "A String",
        ],
        "action": "A String", # Required
        "permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
          "A String",
        ],
        "conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
          { # A condition to be met.
            "iam": "A String", # Trusted attributes supplied by the IAM system.
            "sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
            "values": [ # The objects of the condition.
              "A String",
            ],
            "svc": "A String", # Trusted attributes discharged by the service.
            "op": "A String", # An operator to apply the subject with.
          },
        ],
        "description": "A String", # Human-readable description of the rule.
      },
    ],
    "version": 42, # Specifies the format of the policy.
        #
        # Valid values are 0, 1, and 3. Requests specifying an invalid value will be rejected.
        #
        # Operations affecting conditional bindings must specify version 3. This can be either setting a conditional policy, modifying a conditional binding, or removing a conditional binding from the stored conditional policy. Operations on non-conditional policies may specify any valid value or leave the field unset.
        #
        # If no etag is provided in the call to `setIamPolicy`, any version compliance checks on the incoming and/or stored policy is skipped.
    "etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
        #
        # If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten. Due to blind-set semantics of an etag-less policy, 'setIamPolicy' will not fail even if either of incoming or stored policy does not meet the version requirements.
    "bindings": [ # Associates a list of `members` to a `role`. Optionally may specify a `condition` that determines when binding is in effect. `bindings` with no members will result in an error.
      { # Associates `members` with a `role`.
        "role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
        "members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
            #
            # * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
            #
            # * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
            #
            # * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
            #
            #
            #
            # * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
            #
            # * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
            #
            #
            #
            # * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
          "A String",
        ],
        "condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
            #
            # title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
          "title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
              #
              # The application context of the containing message determines which well-known feature set of CEL is supported.
          "description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
        },
      },
    ],
    "iamOwned": True or False,
  }
insert(project=*, zone=*, body=*, requestId=None, sourceImage=None)
Creates a persistent disk in the specified project using the data in the request. You can create a disk with a sourceImage, a sourceSnapshot, or create an empty 500 GB data disk by omitting all properties. You can also create a disk that is larger than the default size by specifying the sizeGb property. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{ # Represents a Persistent Disk resource.
      # 
      # Persistent disks are required for running your VM instances. Create both boot and non-boot (data) persistent disks. For more information, read Persistent Disks. For more storage options, read Storage options.
      # 
      # The disks resource represents a zonal persistent disk. For more information, read Zonal persistent disks.
      # 
      # The regionDisks resource represents a regional persistent disk. For more information, read  Regional resources. (== resource_for beta.disks ==) (== resource_for v1.disks ==) (== resource_for v1.regionDisks ==) (== resource_for beta.regionDisks ==)
    "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
    },
    "labels": { # Labels to apply to this disk. These can be later modified by the setLabels method.
      "a_key": "A String",
    },
    "guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read  Enabling guest operating system features to see a list of available options.
      { # Guest OS features.
        "type": "A String", # The ID of a supported feature. Read  Enabling guest operating system features to see a list of available options.
      },
    ],
    "licenses": [ # A list of publicly visible licenses. Reserved for Google's use.
      "A String",
    ],
    "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
    "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
    "licenseCodes": [ # Integer license codes indicating which licenses are attached to this disk.
      "A String",
    ],
    "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts the disk using a customer-supplied encryption key.
        # 
        # After you encrypt a disk with a customer-supplied key, you must provide the same key if you use the disk later (e.g. to create a disk snapshot, to create a disk image, to create a machine image, or to attach the disk to a virtual machine).
        # 
        # Customer-supplied encryption keys do not protect access to metadata of the disk.
        # 
        # If you do not provide an encryption key when creating the disk, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
    },
    "zone": "A String", # [Output Only] URL of the zone where the disk resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
    "physicalBlockSizeBytes": "A String", # Physical block size of the persistent disk, in bytes. If not present in a request, a default value is used. Currently supported sizes are 4096 and 16384, other sizes may be added in the future. If an unsupported value is requested, the error message will list the supported values for the caller's project.
    "lastAttachTimestamp": "A String", # [Output Only] Last attach timestamp in RFC3339 text format.
    "type": "A String", # URL of the disk type resource describing which disk type to use to create the disk. Provide this when creating the disk. For example: projects/project/zones/zone/diskTypes/pd-standard or pd-ssd
    "status": "A String", # [Output Only] The status of disk creation. CREATING: Disk is provisioning. RESTORING: Source data is being copied into the disk. FAILED: Disk creation failed. READY: Disk is ready for use. DELETING: Disk is deleting.
    "sourceSnapshot": "A String", # The source snapshot used to create this disk. You can provide this as a partial or full URL to the resource. For example, the following are valid values:
        # - https://www.googleapis.com/compute/v1/projects/project/global/snapshots/snapshot
        # - projects/project/global/snapshots/snapshot
        # - global/snapshots/snapshot
    "lastDetachTimestamp": "A String", # [Output Only] Last detach timestamp in RFC3339 text format.
    "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
    "labelFingerprint": "A String", # A fingerprint for the labels being applied to this disk, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet.
        # 
        # To see the latest fingerprint, make a get() request to retrieve a disk.
    "sourceImageId": "A String", # [Output Only] The ID value of the image used to create this disk. This value identifies the exact image that was used to create this persistent disk. For example, if you created the persistent disk from an image that was later deleted and recreated under the same name, the source image ID would identify the exact version of the image that was used.
    "resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations.
      "A String",
    ],
    "replicaZones": [ # URLs of the zones where the disk should be replicated to. Only applicable for regional resources.
      "A String",
    ],
    "sourceSnapshotId": "A String", # [Output Only] The unique ID of the snapshot used to create this disk. This value identifies the exact snapshot that was used to create this persistent disk. For example, if you created the persistent disk from a snapshot that was later deleted and recreated under the same name, the source snapshot ID would identify the exact version of the snapshot that was used.
    "users": [ # [Output Only] Links to the users of the disk (attached instances) in form: projects/project/zones/zone/instances/instance
      "A String",
    ],
    "kind": "compute#disk", # [Output Only] Type of the resource. Always compute#disk for disks.
    "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
    "sizeGb": "A String", # Size of the persistent disk, specified in GB. You can specify this field when creating a persistent disk using the sourceImage or sourceSnapshot parameter, or specify it alone to create an empty persistent disk.
        # 
        # If you specify this field along with sourceImage or sourceSnapshot, the value of sizeGb must not be less than the size of the sourceImage or the size of the snapshot. Acceptable values are 1 to 65536, inclusive.
    "region": "A String", # [Output Only] URL of the region where the disk resides. Only applicable for regional resources. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
    "sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot. Required if the source snapshot is protected by a customer-supplied encryption key.
      "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
      "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
      "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
    },
    "options": "A String", # Internal use only.
    "selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
    "sourceImage": "A String", # The source image used to create this disk. If the source image is deleted, this field will not be set.
        # 
        # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
        # projects/debian-cloud/global/images/family/debian-9
        # 
        # 
        # Alternatively, use a specific version of a public operating system image:
        # projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
        # 
        # 
        # To create a disk with a custom image that you created, specify the image name in the following format:
        # global/images/my-custom-image
        # 
        # 
        # You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
        # global/images/family/my-image-family
  }

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
  sourceImage: string, Optional. Source image to restore onto a disk.

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
list(project=*, zone=*, orderBy=None, maxResults=None, pageToken=None, filter=None)
Retrieves a list of persistent disks contained within the specified zone. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.

You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.

Currently, only sorting by name or creationTimestamp desc is supported.
  maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
  pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
  filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.

For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.

You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.

To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).

Returns:
  An object of the form:

    { # A list of Disk resources.
    "nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
    "kind": "compute#diskList", # [Output Only] Type of resource. Always compute#diskList for lists of disks.
    "items": [ # A list of Disk resources.
      { # Represents a Persistent Disk resource.
            #
            # Persistent disks are required for running your VM instances. Create both boot and non-boot (data) persistent disks. For more information, read Persistent Disks. For more storage options, read Storage options.
            #
            # The disks resource represents a zonal persistent disk. For more information, read Zonal persistent disks.
            #
            # The regionDisks resource represents a regional persistent disk. For more information, read  Regional resources. (== resource_for beta.disks ==) (== resource_for v1.disks ==) (== resource_for v1.regionDisks ==) (== resource_for beta.regionDisks ==)
          "sourceImageEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source image. Required if the source image is protected by a customer-supplied encryption key.
            "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
            "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
            "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
          },
          "labels": { # Labels to apply to this disk. These can be later modified by the setLabels method.
            "a_key": "A String",
          },
          "guestOsFeatures": [ # A list of features to enable on the guest operating system. Applicable only for bootable images. Read  Enabling guest operating system features to see a list of available options.
            { # Guest OS features.
              "type": "A String", # The ID of a supported feature. Read  Enabling guest operating system features to see a list of available options.
            },
          ],
          "licenses": [ # A list of publicly visible licenses. Reserved for Google's use.
            "A String",
          ],
          "creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
          "id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
          "licenseCodes": [ # Integer license codes indicating which licenses are attached to this disk.
            "A String",
          ],
          "diskEncryptionKey": { # Represents a customer-supplied encryption key # Encrypts the disk using a customer-supplied encryption key.
              #
              # After you encrypt a disk with a customer-supplied key, you must provide the same key if you use the disk later (e.g. to create a disk snapshot, to create a disk image, to create a machine image, or to attach the disk to a virtual machine).
              #
              # Customer-supplied encryption keys do not protect access to metadata of the disk.
              #
              # If you do not provide an encryption key when creating the disk, then the disk will be encrypted using an automatically generated key and you do not need to provide a key to use the disk later.
            "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
            "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
            "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
          },
          "zone": "A String", # [Output Only] URL of the zone where the disk resides. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
          "physicalBlockSizeBytes": "A String", # Physical block size of the persistent disk, in bytes. If not present in a request, a default value is used. Currently supported sizes are 4096 and 16384, other sizes may be added in the future. If an unsupported value is requested, the error message will list the supported values for the caller's project.
          "lastAttachTimestamp": "A String", # [Output Only] Last attach timestamp in RFC3339 text format.
          "type": "A String", # URL of the disk type resource describing which disk type to use to create the disk. Provide this when creating the disk. For example: projects/project/zones/zone/diskTypes/pd-standard or pd-ssd
          "status": "A String", # [Output Only] The status of disk creation. CREATING: Disk is provisioning. RESTORING: Source data is being copied into the disk. FAILED: Disk creation failed. READY: Disk is ready for use. DELETING: Disk is deleting.
          "sourceSnapshot": "A String", # The source snapshot used to create this disk. You can provide this as a partial or full URL to the resource. For example, the following are valid values:
              # - https://www.googleapis.com/compute/v1/projects/project/global/snapshots/snapshot
              # - projects/project/global/snapshots/snapshot
              # - global/snapshots/snapshot
          "lastDetachTimestamp": "A String", # [Output Only] Last detach timestamp in RFC3339 text format.
          "description": "A String", # An optional description of this resource. Provide this property when you create the resource.
          "labelFingerprint": "A String", # A fingerprint for the labels being applied to this disk, which is essentially a hash of the labels set used for optimistic locking. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels, otherwise the request will fail with error 412 conditionNotMet.
              #
              # To see the latest fingerprint, make a get() request to retrieve a disk.
          "sourceImageId": "A String", # [Output Only] The ID value of the image used to create this disk. This value identifies the exact image that was used to create this persistent disk. For example, if you created the persistent disk from an image that was later deleted and recreated under the same name, the source image ID would identify the exact version of the image that was used.
          "resourcePolicies": [ # Resource policies applied to this disk for automatic snapshot creations.
            "A String",
          ],
          "replicaZones": [ # URLs of the zones where the disk should be replicated to. Only applicable for regional resources.
            "A String",
          ],
          "sourceSnapshotId": "A String", # [Output Only] The unique ID of the snapshot used to create this disk. This value identifies the exact snapshot that was used to create this persistent disk. For example, if you created the persistent disk from a snapshot that was later deleted and recreated under the same name, the source snapshot ID would identify the exact version of the snapshot that was used.
          "users": [ # [Output Only] Links to the users of the disk (attached instances) in form: projects/project/zones/zone/instances/instance
            "A String",
          ],
          "kind": "compute#disk", # [Output Only] Type of the resource. Always compute#disk for disks.
          "name": "A String", # Name of the resource. Provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
          "sizeGb": "A String", # Size of the persistent disk, specified in GB. You can specify this field when creating a persistent disk using the sourceImage or sourceSnapshot parameter, or specify it alone to create an empty persistent disk.
              #
              # If you specify this field along with sourceImage or sourceSnapshot, the value of sizeGb must not be less than the size of the sourceImage or the size of the snapshot. Acceptable values are 1 to 65536, inclusive.
          "region": "A String", # [Output Only] URL of the region where the disk resides. Only applicable for regional resources. You must specify this field as part of the HTTP request URL. It is not settable as a field in the request body.
          "sourceSnapshotEncryptionKey": { # Represents a customer-supplied encryption key # The customer-supplied encryption key of the source snapshot. Required if the source snapshot is protected by a customer-supplied encryption key.
            "rawKey": "A String", # Specifies a 256-bit customer-supplied encryption key, encoded in RFC 4648 base64 to either encrypt or decrypt this resource.
            "sha256": "A String", # [Output only] The RFC 4648 base64 encoded SHA-256 hash of the customer-supplied encryption key that protects this resource.
            "kmsKeyName": "A String", # The name of the encryption key that is stored in Google Cloud KMS.
          },
          "options": "A String", # Internal use only.
          "selfLink": "A String", # [Output Only] Server-defined fully-qualified URL for this resource.
          "sourceImage": "A String", # The source image used to create this disk. If the source image is deleted, this field will not be set.
              #
              # To create a disk with one of the public operating system images, specify the image by its family name. For example, specify family/debian-9 to use the latest Debian 9 image:
              # projects/debian-cloud/global/images/family/debian-9
              #
              #
              # Alternatively, use a specific version of a public operating system image:
              # projects/debian-cloud/global/images/debian-9-stretch-vYYYYMMDD
              #
              #
              # To create a disk with a custom image that you created, specify the image name in the following format:
              # global/images/my-custom-image
              #
              #
              # You can also specify a custom image by its image family, which returns the latest version of the image in that family. Replace the image name with family/family-name:
              # global/images/family/my-image-family
        },
    ],
    "warning": { # [Output Only] Informational warning message.
      "message": "A String", # [Output Only] A human-readable description of the warning code.
      "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
      "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
          # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
        {
          "value": "A String", # [Output Only] A warning data value corresponding to the key.
          "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
        },
      ],
    },
    "id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
    "selfLink": "A String", # [Output Only] Server-defined URL for this resource.
  }
list_next(previous_request=*, previous_response=*)
Retrieves the next page of results.

Args:
  previous_request: The request for the previous page. (required)
  previous_response: The response from the request for the previous page. (required)

Returns:
  A request object that you can call 'execute()' on to request the next
  page. Returns None if there are no more items in the collection.
    
removeResourcePolicies(project=*, zone=*, disk=*, body=*, requestId=None)
Removes resource policies from a disk. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, The disk name for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "resourcePolicies": [ # Resource policies to be removed from this disk.
      "A String",
    ],
  }

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
resize(project=*, zone=*, disk=*, body=*, requestId=None)
Resizes the specified persistent disk. You can only increase the size of the disk. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  disk: string, The name of the persistent disk. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "sizeGb": "A String", # The new size of the persistent disk, which is specified in GB.
  }

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
setIamPolicy(project=*, zone=*, resource=*, body=*)
Sets the access control policy on the specified resource. Replaces any existing policy. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  resource: string, Name or id of the resource for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "policy": { # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources. # REQUIRED: The complete policy to be applied to the 'resource'. The size of the policy is limited to a few 10s of KB. An empty policy is in general a valid policy but certain services (like Projects) might reject them.
        #
        #
        #
        # A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions (defined by IAM or configured by users). A `binding` can optionally specify a `condition`, which is a logic expression that further constrains the role binding based on attributes about the request and/or target resource.
        #
        # **JSON Example**
        #
        # { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ] }
        #
        # **YAML Example**
        #
        # bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
        #
        # For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
      "auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
        { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
            #
            # If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
            #
            # Example Policy with multiple AuditConfigs:
            #
            # { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
            #
            # For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
          "exemptedMembers": [
            "A String",
          ],
          "auditLogConfigs": [ # The configuration for logging of each type of permission.
            { # Provides the configuration for logging a type of permissions. Example:
                #
                # { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
                #
                # This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
              "exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
                "A String",
              ],
              "ignoreChildExemptions": True or False,
              "logType": "A String", # The log type that this config enables.
            },
          ],
          "service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
        },
      ],
      "rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
        { # A rule to be applied in a Policy.
          "logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
            { # Specifies what kind of log the caller must write
              "counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
                  #
                  # Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
                  #
                  # Field names correspond to IAM request parameters and field values are their respective values.
                  #
                  # Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
                  #
                  # Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
                  #
                  # TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
                "field": "A String", # The field value to attribute.
                "customFields": [ # Custom fields.
                  { # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
                    "name": "A String", # Name is the field name.
                    "value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
                  },
                ],
                "metric": "A String", # The metric to update.
              },
              "dataAccess": { # Write a Data Access (Gin) log # Data access options.
                "logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
              },
              "cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
                "logName": "A String", # The log_name to populate in the Cloud Audit Record.
                "authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
                  "permissionType": "A String", # The type of the permission that was checked.
                },
              },
            },
          ],
          "notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
            "A String",
          ],
          "ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
            "A String",
          ],
          "action": "A String", # Required
          "permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
            "A String",
          ],
          "conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
            { # A condition to be met.
              "iam": "A String", # Trusted attributes supplied by the IAM system.
              "sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
              "values": [ # The objects of the condition.
                "A String",
              ],
              "svc": "A String", # Trusted attributes discharged by the service.
              "op": "A String", # An operator to apply the subject with.
            },
          ],
          "description": "A String", # Human-readable description of the rule.
        },
      ],
      "version": 42, # Specifies the format of the policy.
          #
          # Valid values are 0, 1, and 3. Requests specifying an invalid value will be rejected.
          #
          # Operations affecting conditional bindings must specify version 3. This can be either setting a conditional policy, modifying a conditional binding, or removing a conditional binding from the stored conditional policy. Operations on non-conditional policies may specify any valid value or leave the field unset.
          #
          # If no etag is provided in the call to `setIamPolicy`, any version compliance checks on the incoming and/or stored policy is skipped.
      "etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
          #
          # If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten. Due to blind-set semantics of an etag-less policy, 'setIamPolicy' will not fail even if either of incoming or stored policy does not meet the version requirements.
      "bindings": [ # Associates a list of `members` to a `role`. Optionally may specify a `condition` that determines when binding is in effect. `bindings` with no members will result in an error.
        { # Associates `members` with a `role`.
          "role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
          "members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
              #
              # * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
              #
              # * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
              #
              # * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
              #
              #
              #
              # * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
              #
              # * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
              #
              #
              #
              # * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
            "A String",
          ],
          "condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
              #
              # title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
            "title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
            "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
                #
                # The application context of the containing message determines which well-known feature set of CEL is supported.
            "description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
            "location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
          },
        },
      ],
      "iamOwned": True or False,
    },
    "bindings": [ # Flatten Policy to create a backwacd compatible wire-format. Deprecated. Use 'policy' to specify bindings.
      { # Associates `members` with a `role`.
        "role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
        "members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
            #
            # * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
            #
            # * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
            #
            # * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
            #
            #
            #
            # * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
            #
            # * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
            #
            #
            #
            # * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
          "A String",
        ],
        "condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
            #
            # title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
          "title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
              #
              # The application context of the containing message determines which well-known feature set of CEL is supported.
          "description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
        },
      },
    ],
    "etag": "A String", # Flatten Policy to create a backward compatible wire-format. Deprecated. Use 'policy' to specify the etag.
  }


Returns:
  An object of the form:

    { # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources.
      #
      #
      #
      # A `Policy` is a collection of `bindings`. A `binding` binds one or more `members` to a single `role`. Members can be user accounts, service accounts, Google groups, and domains (such as G Suite). A `role` is a named list of permissions (defined by IAM or configured by users). A `binding` can optionally specify a `condition`, which is a logic expression that further constrains the role binding based on attributes about the request and/or target resource.
      #
      # **JSON Example**
      #
      # { "bindings": [ { "role": "roles/resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com" ] }, { "role": "roles/resourcemanager.organizationViewer", "members": ["user:eve@example.com"], "condition": { "title": "expirable access", "description": "Does not grant access after Sep 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", } } ] }
      #
      # **YAML Example**
      #
      # bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/resourcemanager.organizationAdmin - members: - user:eve@example.com role: roles/resourcemanager.organizationViewer condition: title: expirable access description: Does not grant access after Sep 2020 expression: request.time < timestamp('2020-10-01T00:00:00.000Z')
      #
      # For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
    "auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
      { # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
          #
          # If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
          #
          # Example Policy with multiple AuditConfigs:
          #
          # { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "sampleservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:aliya@example.com" ] } ] } ] }
          #
          # For sampleservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts jose@example.com from DATA_READ logging, and aliya@example.com from DATA_WRITE logging.
        "exemptedMembers": [
          "A String",
        ],
        "auditLogConfigs": [ # The configuration for logging of each type of permission.
          { # Provides the configuration for logging a type of permissions. Example:
              #
              # { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:jose@example.com" ] }, { "log_type": "DATA_WRITE", } ] }
              #
              # This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from DATA_READ logging.
            "exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
              "A String",
            ],
            "ignoreChildExemptions": True or False,
            "logType": "A String", # The log type that this config enables.
          },
        ],
        "service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
      },
    ],
    "rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
      { # A rule to be applied in a Policy.
        "logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
          { # Specifies what kind of log the caller must write
            "counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
                #
                # Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
                #
                # Field names correspond to IAM request parameters and field values are their respective values.
                #
                # Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
                #
                # Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/debug_access_count {iam_principal=[value of IAMContext.principal]}
                #
                # TODO(b/141846426): Consider supporting "authority" and "iam_principal" fields in the same counter.
              "field": "A String", # The field value to attribute.
              "customFields": [ # Custom fields.
                { # Custom fields. These can be used to create a counter with arbitrary field/value pairs. See: go/rpcsp-custom-fields.
                  "name": "A String", # Name is the field name.
                  "value": "A String", # Value is the field value. It is important that in contrast to the CounterOptions.field, the value here is a constant that is not derived from the IAMContext.
                },
              ],
              "metric": "A String", # The metric to update.
            },
            "dataAccess": { # Write a Data Access (Gin) log # Data access options.
              "logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
            },
            "cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
              "logName": "A String", # The log_name to populate in the Cloud Audit Record.
              "authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
                "permissionType": "A String", # The type of the permission that was checked.
              },
            },
          },
        ],
        "notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
          "A String",
        ],
        "ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
          "A String",
        ],
        "action": "A String", # Required
        "permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
          "A String",
        ],
        "conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
          { # A condition to be met.
            "iam": "A String", # Trusted attributes supplied by the IAM system.
            "sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
            "values": [ # The objects of the condition.
              "A String",
            ],
            "svc": "A String", # Trusted attributes discharged by the service.
            "op": "A String", # An operator to apply the subject with.
          },
        ],
        "description": "A String", # Human-readable description of the rule.
      },
    ],
    "version": 42, # Specifies the format of the policy.
        #
        # Valid values are 0, 1, and 3. Requests specifying an invalid value will be rejected.
        #
        # Operations affecting conditional bindings must specify version 3. This can be either setting a conditional policy, modifying a conditional binding, or removing a conditional binding from the stored conditional policy. Operations on non-conditional policies may specify any valid value or leave the field unset.
        #
        # If no etag is provided in the call to `setIamPolicy`, any version compliance checks on the incoming and/or stored policy is skipped.
    "etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
        #
        # If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten. Due to blind-set semantics of an etag-less policy, 'setIamPolicy' will not fail even if either of incoming or stored policy does not meet the version requirements.
    "bindings": [ # Associates a list of `members` to a `role`. Optionally may specify a `condition` that determines when binding is in effect. `bindings` with no members will result in an error.
      { # Associates `members` with a `role`.
        "role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
        "members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
            #
            # * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
            #
            # * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
            #
            # * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@example.com` .
            #
            #
            #
            # * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
            #
            # * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
            #
            #
            #
            # * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
          "A String",
        ],
        "condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
            #
            # title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
          "title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
          "expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
              #
              # The application context of the containing message determines which well-known feature set of CEL is supported.
          "description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
          "location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
        },
      },
    ],
    "iamOwned": True or False,
  }
setLabels(project=*, zone=*, resource=*, body=*, requestId=None)
Sets the labels on a disk. To learn more about labels, read the Labeling Resources documentation. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  resource: string, Name or id of the resource for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "labelFingerprint": "A String", # The fingerprint of the previous set of labels for this resource, used to detect conflicts. The fingerprint is initially generated by Compute Engine and changes after every request to modify or update labels. You must always provide an up-to-date fingerprint hash in order to update or change labels. Make a get() request to the resource to get the latest fingerprint.
    "labels": { # The labels to set for this resource.
      "a_key": "A String",
    },
  }

  requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.

For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.

The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).

Returns:
  An object of the form:

    { # Represents an Operation resource.
      #
      # You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
      #
      # Operations can be global, regional or zonal.
      # - For global operations, use the globalOperations resource.
      # - For regional operations, use the regionOperations resource.
      # - For zonal operations, use the zonalOperations resource.
      #
      # For more information, read  Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
    "targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
    "clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
    "creationTimestamp": "A String", # [Deprecated] This field is deprecated.
    "id": "A String", # [Output Only] The unique identifier for the operation. This identifier is defined by the server.
    "zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
    "insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
    "operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
    "httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
    "progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
    "httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
    "statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
    "status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
    "description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
    "warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
      {
        "message": "A String", # [Output Only] A human-readable description of the warning code.
        "code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
        "data": [ # [Output Only] Metadata about this warning in key: value format. For example:
            # "data": [ { "key": "scope", "value": "zones/us-east1-d" }
          {
            "value": "A String", # [Output Only] A warning data value corresponding to the key.
            "key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
          },
        ],
      },
    ],
    "user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
    "startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
    "kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
    "name": "A String", # [Output Only] Name of the operation.
    "region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
    "error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
      "errors": [ # [Output Only] The array of errors encountered while processing this operation.
        {
          "message": "A String", # [Output Only] An optional, human-readable error message.
          "code": "A String", # [Output Only] The error type identifier for this error.
          "location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
        },
      ],
    },
    "endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
    "selfLink": "A String", # [Output Only] Server-defined URL for the resource.
    "targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
  }
testIamPermissions(project=*, zone=*, resource=*, body=*)
Returns permissions that a caller has on the specified resource. (== suppress_warning http-rest-shadowed ==)

Args:
  project: string, Project ID for this request. (required)
  zone: string, The name of the zone for this request. (required)
  resource: string, Name or id of the resource for this request. (required)
  body: object, The request body. (required)
    The object takes the form of:

{
    "permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
      "A String",
    ],
  }


Returns:
  An object of the form:

    {
    "permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
      "A String",
    ],
  }