View raw content Back to Reference page
// Protocol version: v.329 import "google/protobuf/struct.proto"; // This is the message that Google uses to request bids. A BidRequest // includes the ad slot from a single impression. message BidRequest { // Unique request id generated by Google. This is 16 bytes long. required bytes id = 2; // ----------------------------------------------------------- // This section lists information that we know about the user. // // The first 3 bytes of the IP address in network byte order for IPv4, or the // first 6 bytes for IPv6. Note that the number and position of the bytes // included from IPv6 addresses may change later. optional bytes ip = 4; // Reasons for special treatment of user data (google_user_id, // hosted_match_data, IDFA, etc). enum UserDataTreatment { // The current request should be treated as child-directed for purposes of // the Children's Online Privacy Protection Act. See // https://support.google.com/admanager/answer/4442399 for more information. TAG_FOR_CHILD_DIRECTED_TREATMENT = 0; } // Deprecated. This will be removed in March 2024. // When user_data_treatment is set, the user's cookie/id data is cleared from // the request and is not sent in callout. // The impacted fields are: // * google_user_id // * hosted_match_data // * mobile.encrypted_advertising_id // * mobile.encrypted_hashed_idfa // * session_id repeated UserDataTreatment user_data_treatment = 49 [deprecated = true]; // The Google ID for the user. This field is the unpadded web-safe base64 // encoded version of a binary cookie id. See the "Base 64 Encoding with URL // and Filename Safe Alphabet" section in RFC 3548 for encoding details. This // field may be the same as the Google ID returned by the cookie matching // service. Not set if there is one or more user_data_treatment value. optional string google_user_id = 21; // The version number of the google_user_id. We may sometimes change the // mapping from cookie to google_user_id. In this case the version will be // incremented. optional uint32 cookie_version = 20; // The time in seconds since the google_user_id was created. // This number may be quantized. optional int32 cookie_age_seconds = 31; // Match data stored for this google_user_id through the cookie matching // service. If a match exists, then this field holds the decoded data that // was passed in the google_hm parameter. // Not set if there is one or more user_data_treatment value. optional bytes hosted_match_data = 37; // Represents a short-lived user session on CTV/OTT devices, // with a maximum session duration of 6 hours. // The use of session_id is never allowed for ads personalization. // session_id may only be used for frequency capping, competitive exclusions // or related purposes. optional string session_id = 65; // Time in seconds since the first ad request in a given app or site session. // The session is reset after a sufficiently long break in user activity. // Currently, the field is only supported for mobile app requests. optional int32 session_duration_seconds = 83; // A pseudonymized identifier created and controlled by the publisher for use // in frequency capping, audience segmentation and targeting, and sequential // ad rotation. See https://support.google.com/admanager/answer/2880055. optional string publisher_provided_id = 79; // Publisher first-party identifier scoped to a single site, app or vendor. message PublisherFirstPartyId { // Specifies how an ID is scoped and the type of requests it is used with. enum IdType { // A default value that should not be used. UNKNOWN = 0; // A site-scoped cookie for requests from web browsers. SITE_SCOPED_COOKIE = 1; } // The type of the ID. This specifies how it is scoped and the type of // requests it is used with. optional IdType id_type = 1; // The value of the ID. optional string id = 2; } optional PublisherFirstPartyId publisher_first_party_id = 85; // A string that identifies the browser and type of device that sent the // request. Certain data may be redacted or replaced. optional string user_agent = 6; // Information about privacy treatments that apply to an ad opportunity // offered through this request. message PrivacyTreatments { // Generalization that can be applied to the BidRequest.ip field. enum IpGeneralization { // The BidRequest.ip field is truncated, /24 for IPv4 and /48 for IPv6. // IPv4 addresses are truncated to 3-byte strings, representing the // first three octets of an IP address. IPv6 addresses are truncated to // 6-byte strings, representing the first 6 octets of an IP address. IP_TRUNCATED = 0; // The BidRequest.ip field is redacted. IP_REDACTED = 2; } // Generalization for the BidRequest.ip field. optional IpGeneralization ip = 1; // Generalization that can be applied to the user_agent and user_agent_data // fields. enum UserAgentGeneralization { // The user_agent and user_agent_data fields are both provided in full. USER_AGENT_FULL = 0; // The user_agent and user_agent_data fields are generalized, which can // include limiting browser and OS version information to major versions // only and other changes to protect user privacy. USER_AGENT_COARSE = 1; } // Generalization that was applied to the user_agent and user_agent_data // fields, if any. optional UserAgentGeneralization user_agent = 2; // Specifies the reasons that ads returned in response to this request // should not be personalized. This signal does not reflect user decisions // on surfaces including iOS App Tracking Transparency // (https://developer.apple.com/documentation/apptrackingtransparency) or // Android advertising ID // (https://support.google.com/googleplay/android-developer/answer/6048248). // See BidRequest.device.limit_ad_tracking and // BidRequest.device.app_tracking_authorization_status fields for more // information. enum NonPersonalizedAdsReason { UNKNOWN = 0; // The publisher has declared that this request should serve // non-personalized ads independent of other signals. // https://support.google.com/admanager/answer/9005435#npa PUBLISHER_DECLARED_NPA = 1; // The publisher has requested restricted data processing for this // request. https://support.google.com/authorizedbuyers/answer/11121285 RESTRICT_DATA_PROCESSING = 2; // The user has opted out of ads personalization. USER_OPT_OUT = 3; } repeated NonPersonalizedAdsReason non_personalized_ads_reason = 6 [packed = true]; // True if publisher grants the permission to allow the bidder to use bid // request data to build user profiles for uses such as interest-based ads // and remarketing. To use this data to build user profiles, a bidder must // also win a given impression. // Learn more about data collection controls: // https://support.google.com/admanager/answer/11956152 optional bool allow_user_data_collection = 7; // Reasons why on-device storage access could be restricted during the // delivery of a winning ad. enum DeviceStorageRestrictionReason { DEVICE_STORAGE_RESTRICTION_UNKNOWN = 0; // This request is subject to user consent requirements to allow for // device storage access for advertising use cases such as ads // measurement, frequency capping, or profiling, but consent was // insufficient or not provided. INSUFFICIENT_USER_CONSENT = 1; } // Indicates the reason why access of local device storage during winning ad // rendering and measurement is restricted. optional DeviceStorageRestrictionReason device_storage_restriction_reason = 8; } optional PrivacyTreatments privacy_treatments = 71; // Data segments that describe the content or audience. message SegmentData { // The Google assigned ID of the data provider. For the list of data // providers, see // https://storage.googleapis.com/adx-rtb-dictionaries/data_providers.txt. optional string id = 5; // Exchange-specific name for the signal provider. optional string name = 1; // Segment objects contain segment IDs that can be used with the taxonomy // type to access first party data. message Segment { // ID of the data segment specific to the signal provider. optional string id = 1; } repeated Segment segment = 2; // Identifies the taxonomy that the segment IDs belong to. enum TaxonomyType { TAXONOMY_TYPE_UNKNOWN = 0; // https://github.com/InteractiveAdvertisingBureau/Taxonomies/blob/main/Audience%20Taxonomies/Audience%20Taxonomy%201.1.tsv IAB_AUDIENCE_1_1 = 4; // https://github.com/InteractiveAdvertisingBureau/Taxonomies/blob/main/Content%20Taxonomies/Content%20Taxonomy%202.2.tsv IAB_CONTENT_2_2 = 6; // https://github.com/InteractiveAdvertisingBureau/Taxonomies/blob/main/Content%20Taxonomies/Content%20Taxonomy%203.0.tsv IAB_CONTENT_3_0 = 7; } // The taxonomy in use for segment IDs. optional TaxonomyType type = 3; } // Data segments for Publisher Provided Signals: // https://support.google.com/admanager/answer/12451124 repeated SegmentData segment_data = 75; // Structured user agent information, which can be used when a client // supports User-Agent Client Hints: https://wicg.github.io/ua-client-hints/ // // Note: When available, fields are sourced from Client Hints HTTP headers // or equivalent JavaScript accessors from the NavigatorUAData interface. // For agents that have no support for User-Agent Client Hints, an exchange // can also extract information from the parsed User-Agent header, so this // object can always be used as the source of the user agent information. message UserAgent { // Identifies a device's browser or similar software component, and the // user agent's execution platform or operating system. message BrandVersion { // A brand identifier, for example, "Chrome" or "Windows". The value may // be sourced from the User-Agent Client Hints headers, representing // either the user agent brand (from the Sec-CH-UA-Full-Version header) // or the platform brand (from the Sec-CH-UA-Platform header). optional string brand = 1; // A sequence of version components, in descending hierarchical order // (major, minor, micro, ...). repeated string version = 2; } // Each BrandVersion object identifies a browser or similar software // component. Exchanges should send brands and versions derived from // the Sec-CH-UA-Full-Version-List header. repeated BrandVersion browsers = 8; // Identifies the user agent's execution platform / OS. Exchanges should // send a brand derived from the Sec-CH-UA-Platform header, and version // derived from the Sec-CH-UAPlatform-Version header. optional BrandVersion platform = 2; // True if the agent prefers a "mobile" version of the content if // available, meaning optimized for small screens or touch input. False // if the agent prefers the "desktop" or "full" content. Exchanges should // derive this value from the Sec-CH-UAMobile header. optional bool mobile = 3; // Device's major binary architecture, for example, "x86" or "arm". // Exchanges should retrieve this value from the Sec-CH-UA-Arch header. optional string architecture = 4; // Device's bitness, for example, "64" for 64-bit architecture. Exchanges // should retrieve this value from the Sec-CH-UA-Bitness header. optional string bitness = 9; // Device model. Exchanges should retrieve this value from the // Sec-CH-UAModel header. optional string model = 5; // Possible sources for User-Agent data. In the case of Client Hints headers // the source also distinguishes between requests that are restricted to // the low-entropy headers and requests that don't have that restriction; // see wicg.github.io/client-hints-infrastructure/#low-entropy-hint-table. enum Source { UNKNOWN_SOURCE = 0; // User-Agent Client Hints (only low-entropy headers were available). CLIENT_HINTS_LOW_ENTROPY = 1; // User-Agent Client Hints (with high-entropy headers available). CLIENT_HINTS_HIGH_ENTROPY = 2; // Parsed from User-Agent header. USER_AGENT_STRING = 3; } // The source of data for the User Agent information. optional Source source = 10; } // Structured user agent information. If both BidRequest.ua and // BidRequest.sua are present, BidRequest.sua should be considered the // more accurate representation of the device attributes. This is because // BidRequest.ua may contain a frozen or reduced user agent string. optional UserAgent user_agent_data = 63; // The billing address country of the publisher. This may be different from // the detected country of the user in geo_criteria_id or the hosting country // of the website. For a complete list of country codes, refer to // https://developers.google.com/google-ads/api/data/codes-formats#country_codes optional string publisher_country = 55; // The ID of the host publisher. When populated, indicates that the host // publisher participated in revenue sharing, and the ID can be used to // authorize ads.txt. optional string host_publisher_id = 73; // The domain of the partner (of the site/app owner) with ownership // of some portion of ad inventory on the site/app. The partner's ads.txt or // app-ads.txt file will be hosted here. More detail at // http://iabtechlab.com/wp-content/uploads/2021/03/ctv-app-ads-explainer-guide.pdf optional string inventory_partner_domain = 72; // Location of the end user. Uses a subset of the codes used in the Google // Ads API. See the geo-table.csv table in the technical documentation for a // list of IDs. The geo_criteria_id field replaces the deprecated country, // region, city, and metro fields. // It is recommended that BidRequest.geo be used instead of this field. // See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting optional int32 geo_criteria_id = 39; // The user's approximate geographic location. All location information is // IP geolocation-derived. The lat/lon fields may be a reference position // (for example, centroid) for the IP geolocation-derived location that's also // carried by the other fields (for example, a city), and accuracy will be the // radius of a circle with the approximate area of that location. Location and // its accuracy will be fuzzified as necessary to protect user privacy. See // Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting message Geo { // Latitude from -90.0 to +90.0, where negative is south. optional double lat = 1; // Longitude from -180.0 to +180.0, where negative is west. optional double lon = 2; // Country using ISO-3166-1 Alpha-3. optional string country = 3; // Region code using ISO-3166-2; 2-letter state code if USA. optional string region = 4; // Google metro code; similar to but not exactly Nielsen DMAs. optional string metro = 6; // City using United Nations Code for Trade & Transport Locations. // (https://www.unece.org/cefact/locode/service/location.htm). optional string city = 7; // Zip/postal code. optional string zip = 8; // Estimated location accuracy in meters. optional int32 accuracy = 11; // Local time as the number +/- of minutes from UTC. optional int32 utcoffset = 10; } optional Geo geo = 62; // Deprecated. This field will be removed in Q3 2023. It is recommended that // BidRequest.geo.zip be used instead. See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting // Detected postal code of the appropriate type for the country of the end // user (for example, zip code if the country is "US"). The postal_code_prefix // field is set when accuracy is too low to imply a full code, otherwise the // postal_code field is set. optional string postal_code = 33 [deprecated = true]; // Deprecated. This field will be removed in Q3 2023. It is recommended that // BidRequest.geo.zip be used instead. See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting optional string postal_code_prefix = 34 [deprecated = true]; // Deprecated. This field will be removed in Q3 2023. It is recommended that // BidRequest.geo is used instead. See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting // Encrypted hyperlocal targeting signals. optional bytes encrypted_hyperlocal_set = 40 [deprecated = true]; // Coarse geolocation information approximated based on the IP address of the // device the ad request originated from. message Hyperlocal { // A location on the Earth's surface. message Point { optional float latitude = 1; optional float longitude = 2; } // The device can be at any point inside the geofence polygon defined by a // list of corners. Currently, the polygon is always a parallelogram with 4 // corners. repeated Point corners = 1; } message HyperlocalSet { // This field currently contains at most one hyperlocal polygon. repeated Hyperlocal hyperlocal = 1; // The approximate geometric center of a geofence area. It is calculated // exclusively based on the geometric shape of the geofence area and in no // way indicates the mobile device's actual location within the geofence // area. If multiple hyperlocal polygons are specified above then // center_point is the geometric center of all hyperlocal polygons. optional Hyperlocal.Point center_point = 2; } // Deprecated. This field will be removed in Q3 2023. It is recommended that // BidRequest.geo is used instead. See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting // Unencrypted version of encrypted_hyperlocal_set. This field is only set // when using an SSL connection. optional HyperlocalSet hyperlocal_set = 53 [deprecated = true]; // Deprecated. This field will be removed in Q3 2023. It is recommended that // BidRequest.geo is used instead. See Geotargeting Guide: // https://developers.google.com/authorized-buyers/rtb/geotargeting // The offset of the user's time from GMT in minutes. For example, GMT+10 is // timezone_offset = 600. optional int32 timezone_offset = 25 [deprecated = true]; // This field is not populated by default. We recommend that bidders instead // store and look up list ids using either google_user_id or hosted_match_data // as keys. message UserList { // The user list id. optional int64 id = 1; // The time in seconds since the user was added to the list. optional int32 age_seconds = 2; } repeated UserList user_list = 32; // ----------------------------------------------------------- // This section lists information that we know about the web page or mobile // application where the impression originates. // // The publisher ID as defined by the publisher code suffix of // the web property code. For instance, "pub-123" is the publisher code of web // property code "ca-pub-123" (ca- is the product specific prefix of the web // property). optional string publisher_id = 56; // Deprecated. This field will be removed in Q2 2024. // The seller network id. See seller-network-ids.txt file in the technical // documentation for a list of ids. This is only set if the site is not // anonymous and the publisher allows site targeting. optional int32 seller_network_id = 41 [deprecated = true]; // Id for the partner that provides this inventory. This is only set when // seller_network_id is also set and further partner information beyond the // seller_network_id is also available. The value of the partner_id is not // meaningful beyond providing a stable identifier. optional fixed64 partner_id = 52; // The URL of the page with parameters removed. This is only set if the // publisher allows site targeting. This always starts with a protocol (either // http or https). optional string url = 11; // Indicates that the request is using semi-transparent branding, // which means only a truncated version of the request URL will // be provided. This decision is made by the publisher, see // https://support.google.com/admanager/answer/4584891#urls for context. optional bool is_semi_transparent_request = 67; // Detected user languages, based on the language of the web page, the browser // settings, and other signals. The order is arbitrary. The codes are 2 or 5 // characters and are documented at // https://developers.google.com/google-ads/api/data/codes-formats#languages repeated string detected_language = 12; // One or more detected verticals for the page as determined by Google. message Vertical { // The vertical id. See the publisher-verticals.txt file in the technical // documentation for a list of ids. required int32 id = 1; // Weight for this vertical, in the (0.0, 1.0] range. More relevant // verticals have higher weights. required float weight = 2; } // Unordered list of detected content verticals. See the // publisher-verticals.txt file in the technical documentation for a list of // ids. repeated Vertical detected_vertical = 13; // List of detected content labels. See content-labels.txt file in the // technical documentation for a list of ids. repeated int32 detected_content_label = 26 [packed = true]; // The production quality of the content. See // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/AdCOM%20v1.0%20FINAL.md#list--production-qualities- // for details. enum ProductionQuality { QUALITY_UNKNOWN = 0; // Content that is usually created or produced by media and entertainment // companies using professional-grade equipment, talent, and production // crews that hold or maintain the rights for distribution and syndication. PROFESSIONAL = 1; // Consumer or user-generated content that has professional or industrial // qualities (e.g. shot with professional-grade equipment, using // professional talent, etc.). PROSUMER = 2; // Publicly available video content that is created or produced by // end users. USER_GENERATED = 3; } // The production quality of the content where an ad can be shown, as // determined by the publisher. optional ProductionQuality production_quality = 80 [default = QUALITY_UNKNOWN]; // The rating of the content. See // https://support.google.com/admanager/answer/12451124#content-rating for // details. enum ContentRating { RATING_UNKNOWN = 0; // Content suitable for general audiences. GENERAL_AUDIENCES = 1; // Content suitable for most audiences with parental guidance. PARENTAL_GUIDANCE = 2; // Content suitable for teen and older audiences. TEEN = 3; // Content suitable only for mature audiences. MATURE_AUDIENCES = 4; } // The rating of the content where an ad can be shown. optional ContentRating content_rating = 84 [default = RATING_UNKNOWN]; // This represents a unique ID for the overall query. In the event // that there are multiple callouts for a query, all callout requests for that // query will contain the same google_query_id. optional string google_query_id = 59; // The type of auction that will be run for this query. enum AuctionType { UNKNOWN_AUCTION_TYPE = 0; FIRST_PRICE = 1; SECOND_PRICE = 2; FIXED_PRICE = 3; } optional AuctionType auction_type = 60 [default = SECOND_PRICE]; // Information about the device. message Device { // The type of device on which the ad will be shown. enum DeviceType { UNKNOWN_DEVICE = 0; HIGHEND_PHONE = 1; TABLET = 2; // Desktop or laptop devices. PERSONAL_COMPUTER = 3; // Both connected TVs (that is, smart TVs) and connected devices // (such as Roku and Apple TV). CONNECTED_TV = 4; GAME_CONSOLE = 5; SET_TOP_BOX = 6; } optional DeviceType device_type = 1 [default = UNKNOWN_DEVICE]; // The platform of the device. Examples: android, iphone, palm optional string platform = 2 [default = ""]; // The brand of the device (for example, "Apple" or "Samsung"). optional string brand = 3 [default = ""]; // Device model (for example, "pixel 7 pro"). For iPhone/iPad, this // field contains Apple's model identifier string (such as "iPhone12,1" and // "iPad13,8") if available. Otherwise this field contains the generic // model (either "iphone" or "ipad"). optional string model = 4 [default = ""]; // Contains the OS version of the platform. For instance, for Android 2, // major=2, minor=0. For iPhone 3.3.1, major=3 and minor=3. message OsVersion { optional int32 major = 1 [default = -1]; optional int32 minor = 2 [default = -1]; optional int32 micro = 3 [default = -1]; } // The OS version; for example, 2 for Android 2.1, or 3.3 for iOS 3.3.1. optional OsVersion os_version = 5; // Unique identifier for the mobile carrier if the device is connected to // the internet through a carrier (as opposed to through WiFi). To look up // carrier name from carrier ID, refer to: // https://storage.googleapis.com/adx-rtb-dictionaries/mobile-carriers.csv. optional int64 carrier_id = 6 [default = 0]; // The width of the device screen in pixels. optional int32 screen_width = 7 [default = 0]; // The height of the device screen in pixels. optional int32 screen_height = 8 [default = 0]; // Used for high-density devices (for example, iOS retina displays). A // non-default value indicates that the nominal screen size (with pixels as // the unit) does not describe the actual number of pixels in the screen. // For example, nominal width and height may be 320x640 for a screen that // actually has 640x1280 pixels, in which case screen_width=320, // screen_height=640, and screen_pixel_ratio_millis=2000, since each axis // has twice as many pixels as its dimensions would indicate. optional int32 screen_pixel_ratio_millis = 9 [default = 0]; enum ScreenOrientation { UNKNOWN_ORIENTATION = 0; PORTRAIT = 1; LANDSCAPE = 2; } // The screen orientation of the device when the ad request is sent. optional ScreenOrientation screen_orientation = 10 [default = UNKNOWN_ORIENTATION]; // Hardware version of the device. For iPhone/iPad, this field contains // Apple's model identifier string (such as "iPhone12,1" and "iPad13,8") if // available. optional string hardware_version = 11; // "Limit Ad Tracking" is a commercially endorsed signal based on the // operating system or device settings, where `false` indicates that // tracking is unrestricted and `true` indicates that tracking must be // limited per commercial guidelines. // // This signal reflects user decisions on surfaces including iOS App // Tracking Transparency: // https://developer.apple.com/documentation/apptrackingtransparency // See also lmt and App Tracking Transparency guidance: // https://github.com/InteractiveAdvertisingBureau/openrtb/blob/master/extensions/community_extensions/skadnetwork.md#dnt-lmt-and-app-tracking-transparency-guidance // and Android advertising ID: // https://support.google.com/googleplay/android-developer/answer/6048248 optional bool limit_ad_tracking = 12; // The possible app tracking authorization statuses that could be applicable // for bid requests from iOS devices. For more information about iOS's app // tracking authorization status, see: // https://developer.apple.com/documentation/apptrackingtransparency/attrackingmanager/authorizationstatus enum AuthorizationStatus { // User has not yet received a request to authorize access to app-related // data that can be used for tracking the user or the device. NOT_DETERMINED = 0; // Authorization to access app-related data that can be used for tracking // the user or the device is restricted. RESTRICTED = 1; // User denies authorization to access app-related data that can be used // for tracking the user or the device. DENIED = 2; // User authorizes access to app-related data that can be used for // tracking the user or the device. AUTHORIZED = 3; } // This field is only populated for iOS devices. Indicates the app tracking // authorization status. This value is retrieved from ATTrackingManager // and provided as is. For more information about iOS's app tracking // authorization status, see: // https://developer.apple.com/documentation/apptrackingtransparency/attrackingmanager/authorizationstatus optional AuthorizationStatus app_tracking_authorization_status = 13; // Possible types of the device's network connection. enum ConnectionType { CONNECTION_UNKNOWN = 0; // Ethernet; Wired Connection ETHERNET = 1; // WiFi WIFI = 2; // Mobile Network - Unknown Generation CELL_UNKNOWN = 3; // Mobile Network - 2G CELL_2G = 4; // Mobile Network - 3G CELL_3G = 5; // Mobile Network - 4G CELL_4G = 6; // Mobile Network - 5G CELL_5G = 7; } // The type of network to which the user's device is connected. // // For 5G connection type, we send CELL_4G instead of CELL_5G. optional ConnectionType connection_type = 15 [default = CONNECTION_UNKNOWN]; } optional Device device = 54; // Additional key-value attributes. Currently unused. message KeyValue { optional string key = 1; optional string value = 2; } repeated KeyValue key_value = 38; // Information for ad queries coming from mobile devices. A mobile device is // either a mobile phone or a tablet. This is present for ad queries both from // mobile devices browsing the web and from mobile apps. message Mobile { // If true, then this request is from a mobile application. For branded // requests, app_id will also be filled in. If the request is from a mobile // web page contained inside an app, is_app will still be false, but app_id // could be filled in with the app identifier. For SDK-less requests (mostly // from connected TVs), this will be true if an app ID is provided directly // in the request. optional bool is_app = 7 [default = false]; // The identifier of the mobile app when this ad query comes from a mobile // app, or from a mobile web page contained inside an app. If the app was // downloaded from the Apple iTunes app store, then this is the app-store // id, for example, 343200656. For Android devices, this is the fully // qualified package name, for example, com.rovio.angrybirds. For Windows // devices it's the App ID, for example, // f15abcde-f6gh-47i0-j3k8-37l93817mn3o. For SDK-less requests (mostly from // connected TVs), the app ID provided by the publisher directly in the // request. optional string app_id = 6; // If true, then this is a mobile full screen ad request. optional bool is_interstitial_request = 10 [default = false]; // This field contains the IDs of categories to which the current mobile app // belongs. This field will be empty if is_app is false. The mapping between // mobile apps and categories is defined by the Google Play Store for // Android apps, or the Apple iTunes Store for iOS apps. To look up category // name from category ID, refer to // https://developers.google.com/google-ads/api/data/codes-formats#mobile_app_categories repeated int32 app_category_ids = 11; // For a mobile web request, this field indicates whether the page is // optimized for mobile browsers on high-end mobile phones. optional bool is_mobile_web_optimized = 17 [default = false]; // Indicates whether a mobile app bid request is for an app open ad. // See App open ad guidance at // https://support.google.com/admob/answer/9341964 for more information. optional bool is_app_open_ad = 36 [default = false]; // This field is used for advertising identifiers for // 1) iOS devices (This is called Identifier for Advertising, or IDFA, as // described at https://support.google.com/authorizedbuyers/answer/3221407), // 2) Android devices, // 3) Roku devices, // 4) Microsoft Xbox devices, // 5) Amazon devices (for example, Amazon Fire). // // When the encrypted_advertising_id is an IDFA, the plaintext after // decrypting the ciphertext is the IDFA (16 byte UUID) returned by iOS's // [ASIdentifierManager advertisingIdentifier]. For encrypted_hashed_idfa, // the plaintext is the 16 byte MD5 hash of the IDFA. Only one of the two // fields will be available, depending on the version of the SDK making the // request. Later SDKs provide unhashed values. They are not set if there is // one or more user_data_treatment value in the BidRequest. optional bytes encrypted_advertising_id = 20; // Unencrypted version of encrypted_advertising_id. This field is only set // when using an SSL connection. This field is a 16 byte UUID (binary form) // or a 32 byte alphanumeric id (such as Samsung ID). optional bytes advertising_id = 27; optional bytes encrypted_hashed_idfa = 21; // Unencrypted version of encrypted_hashed_idfa. This field is only set // when using an SSL connection. This field is a 16 byte MD5. optional bytes hashed_idfa = 28; // App names for Android apps are from the Google Play store. // App names for iOS apps are provided by App Annie // (https://www.appannie.com). App names for SDK-less requests (mostly from // connected TVs) are provided by the publisher directly in the request. optional string app_name = 24; // Average user rating for the app. The range of user rating is between 1.0 // and 5.0. Currently only available for apps in Google Play store. optional float app_rating = 25; // Identification of and information about an SDK installed in the // publisher's app that the bidder has access to, often because it's the // bidder's SDK. message InstalledSdk { // Identifier for the installed SDK. optional string id = 1; // Semantic version of the installed SDK and the adapter that communicates // between the installed SDK and Google's SDK. message Version { optional int32 major = 1 [default = -1]; optional int32 minor = 2 [default = -1]; optional int32 micro = 3 [default = -1]; } // The version of the installed SDK. optional Version sdk_version = 2; // The version of the adapter that communicates with the installed SDK. optional Version adapter_version = 3; } repeated InstalledSdk installed_sdk = 32; // Publisher's SKAdNetwork information to support app installation // attribution for iOS 14 and later. Apple's SKAdNetwork API helps // advertisers measure ad-driven app installation by sending a postback // to the ad network after a successful install. Publishers will need // to configure supported ad networks in their app's property list // (Info.plist) to allow an install to be attributed to the ad impression. // For more info visit: // https://developer.apple.com/documentation/storekit/skadnetwork message SKAdNetworkRequest { // List of all SKAdNetwork versions supported by the request, depending on // the OS version and the SDK version. repeated string versions = 4; // ID of publisher app in Apple's App Store. optional string sourceapp = 2; // SKAdNetworkIdentifier entries in the publisher app's Info.plist. repeated string skadnetids = 3; // List of fidelity types supported, depending on the SKAdNetwork API // version supported by the operating system and SDK as well as ad slot // properties. repeated SKAdNetworkFidelityType supported_fidelity_types = 5 [packed = true]; // Indicates if this request supports SKOverlay for video ads. optional bool skoverlay = 6; } optional SKAdNetworkRequest skadn = 34; } optional Mobile mobile = 28; // Information about the video if this is an in-video ad request. message Video { // Describes where the video ad will play. enum Placement { UNKNOWN_PLACEMENT = 0; // Instream means the ad plays before, during, or after other video // content. This is similar to a traditional TV commercial. The video // content the user is watching does not play while the ad is playing. INSTREAM = 1; // Interstitial means the video ad plays in front of non-video content, // (for example, a news article or video game). The ad covers all or // nearly all of the space on the screen occupied by the content and the // user is not able to proceed to the content until the ad has finished or // been skipped. INTERSTITIAL = 2; // The in-feed video format is a video creative that shows within a feed // of content, typically a social app feed, a list of editorial content // items, etc, as the user is scrolling. It renders centered and not to // the side. IN_FEED = 3; // Audio is a request for an ad that is an audio stream. It is distinct // from INSTREAM above as that is exclusive to video requests. AUDIO = 4; // The in-article video format is a video creative that loads and plays // between paragraphs of editorial content as a standalone video player. IN_ARTICLE = 5; } // Deprecated. This will be removed in January 2025 per the IAB here: // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/main/AdCOM%20v1.0%20FINAL.md#list--placement-subtypes---video- optional Placement placement = 16 [deprecated = true, default = UNKNOWN_PLACEMENT]; // Possible video placement types. See: // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/AdCOM%20v1.0%20FINAL.md#list--plcmt-subtypes---video- enum Plcmt { PLCMT_UNKNOWN = 0; // Pre-roll, mid-roll, and post-roll ads that are played before, during or // after the streaming video content that the consumer has requested. // Instream video must be set to “sound on” by default at player start, or // have explicitly clear user intent to watch the video content. While // there may be other content surrounding the player, the video content // must be the focus of the user’s visit. It should remain the primary // content on the page and the only video player in-view capable of audio // when playing. If the player converts to floating/sticky, subsequent ad // calls should accurately convey the updated player size. PLCMT_INSTREAM = 1; // Pre-roll, mid-roll, and post-roll ads that are played before, during, // or after streaming video content. The video player loads and plays // before, between, or after paragraphs of text or graphical content, and // starts playing only when it enters the viewport. Accompanying content // should only start playback upon entering the viewport. It may convert // to a floating/sticky player as it scrolls off the page. PLCMT_ACCOMPANYING_CONTENT = 2; // Video ads that are played without video content. During playback, it // must be the primary focus of the page and take up the majority of the // viewport and cannot be scrolled out of view. This can be in placements // like in-app video or slideshows. PLCMT_INTERSTITIAL = 3; // Video ads that are played without streaming video content. This can be // in placements like slideshows, native feeds, in-content or // sticky/floating. PLCMT_NO_CONTENT_STANDALONE = 4; } // Video placement type declared by the publisher for this impression. // Equivalent to the Video.plcmt field introduced in OpenRTB 2.6 to reflect // updated industry definitions around different types of video ad // placements. This field supersedes the Video.placement field. May be unset // if the publisher did not declare a video placement type. optional Plcmt plcmt = 23 [default = PLCMT_UNKNOWN]; // Video placement type inferred by Google for this impression. This field // is always filled and can be different from BidRequest.video.plcmt (the // publisher-declared placement type). optional Plcmt inferred_plcmt = 24 [default = PLCMT_UNKNOWN]; // The URL of the page that the publisher gives Google to describe the video // content, with parameters removed. optional string description_url = 10; // If true, the video is embedded on a page outside the publisher's domain. // When this is set, description_url points to a description of the video // (as it always does), and the url field in BidRequest is the page in which // the video is embedded. For example, a request for an in-stream ad in a // Vimeo video shared on Facebook has is_embedded_offsite set. The url field // is for a Facebook page and the description_url points to the video on // Vimeo. optional bool is_embedded_offsite = 11 [default = false]; // Describes how the video ad will be played. The playback method is // determined to be auto-play, click-to-play or mouse-over based on the best // measurement available. This includes things like how recently the user // interacted with a web page. For auto-play, ads can start playing with the // sound on or off. Some ads (for example, in-feed ads) are muted until the // user interacts with the ad. Alternatively, if an ad would normally play // with the sound on but the device is muted then the value will be set to // sound off. For devices where it is not possible to determine if the // device is muted (for example, desktop), we assume that sound is on. enum VideoPlaybackMethod { METHOD_UNKNOWN = 0; AUTO_PLAY_SOUND_ON = 1; AUTO_PLAY_SOUND_OFF = 2; CLICK_TO_PLAY = 3; MOUSE_OVER = 4; INITIATE_ON_ENTERING_VIEWPORT_SOUND_ON = 5; INITIATE_ON_ENTERING_VIEWPORT_SOUND_OFF = 6; } optional VideoPlaybackMethod playback_method = 14 [default = METHOD_UNKNOWN]; // Whether the inventory allows clicking on the video ad to take the user to // an advertiser site. Some platforms, notably connected TVs, do not // support clicking on video ads, in which case this field is set to false. optional bool is_clickable = 15; // The time in milliseconds from the start of the video when the ad will be // displayed. 0 means pre-roll and -1 means post-roll. The value is valid // only if this param is set. When not set, the display position is unknown. optional int32 videoad_start_delay = 1; // The maximum duration in milliseconds of the ad that you should return. // If this is not set or has value <= 0, any duration is allowed. optional int32 max_ad_duration = 2; // The minimum duration in milliseconds of the ad that you should return. // If this is not set or has value <= 0, there is no minimum duration. optional int32 min_ad_duration = 8; // The maximum number of ads in an Adx video pod. A non-zero value indicates // that the current ad slot is a video pod that can show multiple video // ads. Actual number of video ads shown can be less than or equal to this // value but cannot exceed it. optional int32 max_ads_in_pod = 12; // The maximum duration of a pod in seconds. optional int32 max_pod_duration_seconds = 20; // Does the publisher allow/require/block skippable video ads? enum SkippableBidRequestType { ALLOW_SKIPPABLE = 0; REQUIRE_SKIPPABLE = 1; BLOCK_SKIPPABLE = 2; } optional SkippableBidRequestType video_ad_skippable = 4 [default = ALLOW_SKIPPABLE]; // The maximum duration in milliseconds for the ad you should return, if // this ad is skippable (this generally differs from the maximum duration // allowed for non-skippable ads). If this is not set or has value <= 0, any // duration is allowed. optional int32 skippable_max_ad_duration = 5; // Supported video protocols. enum VideoProtocol { UNKNOWN_VIDEO_PROTOCOL = 0; VAST_1_0 = 1; VAST_2_0 = 2; VAST_3_0 = 3; VAST_1_0_WRAPPER = 4; VAST_2_0_WRAPPER = 5; VAST_3_0_WRAPPER = 6; VAST_4_0 = 7; VAST_4_0_WRAPPER = 8; DAAST_1_0 = 9; DAAST_1_0_WRAPPER = 10; } // Array of supported video bid response protocols. repeated VideoProtocol protocols = 17 [packed = true]; // The video file formats that are allowed for this request. The response // should support at least one of them. enum VideoFormat { UNKNOWN_VIDEO_FORMAT = -1; // Flash video files are accepted (FLV). VIDEO_FLV = 0; VIDEO_MP4 = 1; // Valid VAST ads with at least one media file hosted on youtube.com. YT_HOSTED = 2; // Flash VPAID (SWF). VPAID_FLASH = 3; // JavaScript VPAID. VPAID_JS = 4; AUDIO_MP3 = 5; AUDIO_OGG = 6; // Requires both MP3 & OGG as Google does not know // which codecs are installed on the player. AUDIO_MP3_OGG = 7; VIDEO_WEBM = 8; VIDEO_MOV = 9; VIDEO_3GPP = 10; VIDEO_HLS = 11; VIDEO_DASH = 12; // Audio version of MP4. AUDIO_MP4A = 13; } repeated VideoFormat allowed_video_formats = 6; // Information about the companion ad slots that can be shown with the // video. While this is a repeated field there will only be one value in // most cases. If there are no companion ads available this field will not // be set. message CompanionSlot { // These fields represent the available heights and widths in this slot. // There will always be the same number heights and widths fields. repeated int32 height = 1 [packed = true]; repeated int32 width = 2 [packed = true]; // These are the formats of the creatives allowed in this companion ad // slot. enum CreativeFormat { UNKNOWN_CREATIVE_FORMAT = -1; IMAGE_CREATIVE = 0; FLASH_CREATIVE = 1; HTML_CREATIVE = 2; } repeated CreativeFormat creative_format = 3; } repeated CompanionSlot companion_slot = 7; // End cap support. When enabled, the companion ad can be picked to be // rendered as an end cap (info card) in the video slot after the video // ad finishes playing. If multiple companion ads are returned, IMA SDK // chooses one which best matches the device screen size. End cap is // supported only on mobile video interstitial inventory. enum EndCapSupport { // Companion ad won't be rendered as end cap. END_CAP_NOT_ENABLED = 0; // End cap will be rendered if response contains // eligible companion banner, but companion // banner is not required. END_CAP_OPTIONAL = 1; // Not used at this time. // Response with companion ad is filtered. END_CAP_FORBIDDEN = 2; // Not used at this time. // Response without companion ad is filtered. END_CAP_REQUIRED = 3; } optional EndCapSupport end_cap_support = 13 [default = END_CAP_NOT_ENABLED]; // Attributes of the video that the user is viewing, not the video ad. // These fields are based on the availability of the video metadata from the // video publisher and may not always be populated. message ContentAttributes { // The duration of the video, in seconds. optional int32 duration_seconds = 2; } optional ContentAttributes content_attributes = 9; // Identify whether or not the ad request is being served from a live video // stream (0 = is not live, 1 = is live). optional bool is_livestream = 18 [default = false]; // The event that causes playback to end. This will only be filled // for non-instream video formats. enum PlaybackCessationMode { PLAYBACK_CESSATION_MODE_UNKNOWN = 0; // On video completion or when terminated by user COMPLETION_OR_USER = 1; // On leaving viewport or when terminated by user LEAVING_OR_USER = 2; // On leaving viewport continues as a floating/slider unit until // video completion or when terminated by user LEAVING_CONTINUES_OR_USER = 3; } optional PlaybackCessationMode playback_cessation_mode = 19 [default = PLAYBACK_CESSATION_MODE_UNKNOWN]; // Types of feed for audio content. See // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/AdCOM%20v1.0%20FINAL.md#list--feed-types- // for details. enum FeedType { FEED_TYPE_UNKNOWN = 0; // Music streaming service. MUSIC_SERVICE = 1; // Live content broadcast over the air but also available through online // streaming. FM_AM_BROADCAST = 2; // Original, pre-recorded content distributed as episodes in a series. PODCAST = 3; } // Type of audio content feed where an audio ad can be played. optional FeedType feed_type = 21 [default = FEED_TYPE_UNKNOWN]; // Options for delivery of audio or video content. See // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/AdCOM%20v1.0%20FINAL.md#list_deliverymethods // for details. enum ContentDeliveryMethod { CONTENT_DELIVERY_METHOD_UNKNOWN = 0; // Content is transferred continuously by the network; clients receive // real-time content for playback while connected. Example: broadcast TV. STREAMING = 1; // Content is transferred incrementally as client's playback requires. // Example: on-demand movies, podcasts, or music. PROGRESSIVE = 2; // Content should be transferred completely prior to use/playback. // Example: content downloaded to the user's device for offline // consumption. DOWNLOAD = 3; } // Supported delivery methods for the video or audio content where an ad can // be shown. repeated ContentDeliveryMethod delivery_method = 22 [packed = true]; } optional Video video = 29; // The publisher settings list id that applies to this page. // See the RTB Publisher Settings guide at // https://developers.google.com/authorized-buyers/rtb/pub-settings-guide // for details. optional fixed64 publisher_settings_list_id = 42; // Publisher type of the inventory where the ad will be shown. For a given // request, publisher inventory can be either owned and operated (O&O), // represented by the publisher, or of unknown status. enum PublisherType { UNKNOWN_PUBLISHER_TYPE = 0; PUBLISHER_OWNED_AND_OPERATED = 1; PUBLISHER_REPRESENTED = 2; } optional PublisherType publisher_type = 51 [default = UNKNOWN_PUBLISHER_TYPE]; enum VisibilityState { VISIBILITY_STATE_UNKNOWN = 0; // The page is at least partially visible. For example, in the foreground // tab of a non-minimized window. VISIBILITY_STATE_VISIBLE = 1; // The page is not visible to users. For example, when the page is in a // background browser tab, or in a minimized window. VISIBILITY_STATE_HIDDEN = 2; } // The visibility state of the web page containing the ad slots. // See https://www.w3.org/TR/page-visibility/. optional VisibilityState page_visibility = 66 [default = VISIBILITY_STATE_UNKNOWN]; // Information about a browser window's user activation state. See // https://html.spec.whatwg.org/multipage/interaction.html#the-useractivation-interface message UserActivation { // Indicates whether a user has completed an interaction since page load. optional bool has_been_active = 1; // Indicates whether a user is currently interacting with the page. optional bool is_active = 2; } // User activation information from the browser for the current request, if // the request is for a web page. optional UserActivation user_activation = 76; // The set of possible web navigation types that predicate a page load. Each // of these types may have different performance characteristics. For example, // users going back and forth might experience a faster site than users // performing navigation for the first time or submitting forms. See // https://w3c.github.io/navigation-timing/#dom-performancenavigationtiming-type. enum NavigationType { NAVIGATION_TYPE_UNKNOWN = 0; // Navigation started by clicking a link, entering the URL in the browser's // address bar, form submission, or initializing through a script operation // other than reload and back_forward. NAVIGATION_TYPE_NAVIGATE = 1; // Navigation is through the browser's reload operation, location.reload(), // or a Refresh pragma directive like // <meta http-equiv="refresh" content="300">. NAVIGATION_TYPE_RELOAD = 2; // Navigation is through the browser's history traversal operation. NAVIGATION_TYPE_BACK_FORWARD = 3; // Navigation is initiated by a prerender hint (deprecated). See // https://developer.mozilla.org/en-US/docs/Web/HTML/Attributes/rel/prerender. NAVIGATION_TYPE_PRERENDER = 4; } // The type of browser navigation that led to the current page. Unset for // non-web ad requests. optional NavigationType navigation_type = 77; // ----------------------------------------------------------- // Information about the adslots on the page. message AdSlot { // An arbitrarily assigned slot id that is unique on a given page and // usually starts counting from 1. You use this to identify which slot to // bid on in the BidResponse. required int32 id = 1; // A stable identifier for the combination of publisher, ad slot, and page. optional uint64 ad_block_key = 14; // The width and height in pixels of the allowed ad sizes. Most requests // allow only a single size, but some allow more than one. Widths and // heights are at the same index. For example, if the width values are // [728, 300, 468] and the height values are [90, 250, 60], then the allowed // formats are 728x90, 300x250, and 468x60. // // For VAST video ad requests a single width/height pair specifies the // Google-detected video player size. If Google cannot detect the player // size the publisher-provided player size, if available, is used. For // VAST video ads, this size is informational; there is no restriction on // the size of the video ad that you can return. // // For mobile interstitial ads (including ones where video ads are eligible) // the first width height pair is the slot size (this is also the video // player size for VAST video ads). For many interstitials, this is the // screen size. Subsequent pairs are recommended interstitial ad sizes that // also meet the requirements for this interstitial. repeated int32 width = 2; repeated int32 height = 3; message FlexibleAdSlotSettings { optional int32 max_width = 1; optional int32 max_height = 2; optional int32 min_width = 3; optional int32 min_height = 4; } // If the adslot is flexible, this contains settings on how the slot // may be resized. optional FlexibleAdSlotSettings flexible_adslot_settings = 50; // The disallowed attribute ids for the ads that can show in this slot. See // the publisher-excludable-creative-attributes.txt file in the technical // documentation for a list of ids. repeated int32 excluded_attribute = 4 [packed = true]; // The allowed vendor types. See the vendors.txt file in the technical // documentation for a list of ids. This field does not apply to deals with // block overrides (see // https://support.google.com/authorizedbuyers/answer/6114194). repeated int32 allowed_vendor_type = 6 [packed = true]; message ConsentedProvidersSettings { // Set of IDs corresponding to ad tech providers (ATPs) for whom the // publisher has specified to Google that its EEA users have given legally // valid consent to: 1) the use of cookies or other local storage where // legally required; and 2) the collection, sharing, and use of personal // data for personalization of ads by an ATP in accordance with Google's // EU User Consent Policy. // // If a publisher is using the IAB Transparency and Consent Framework // (TCF) v2 to manage user consent, this is the set of ATPs consented // through the Additional Consent string (see // https://support.google.com/admanager/answer/9681920 for details about // Google's Additional Consent mode). ATPs consented through the TCF v2 // consent string are represented in the // ConsentedProvidersSettings.tcf_consent_string field. // // A mapping of ATP ID to ATP name is posted at providers.csv. repeated int64 consented_providers = 2 [packed = true]; // The web-safe base64-encoded IAB Transparency and Consent Framework // (TCF) v2 consent string fetched from the publisher's IAB Consent // Management Platform (CMP). The structure of the string is defined by // the IAB TCF v2. This field will be populated if the publisher has // integrated with a CMP for TCF v2 and that CMP indicates that GDPR // applies to this ad request and provides a valid consent string. See // https://support.google.com/authorizedbuyers/answer/9789378 for // additional information about the Google TCF v2 integration. // // See the IAB Global Vendor List at // https://vendor-list.consensu.org/v2/vendor-list.json for details about // the vendors listed in the consent string. optional string tcf_consent_string = 3; // The raw Additional Consent string, which contains a list of certain // Google Ad Tech Providers (ATPs). These ATPs are not registered with IAB // TCF v2, but publishers or their Consent Management Providers (CMPs) // have ensured that certain disclosures are given to, and consents are // obtained from, end users, as required by Google's EU User Consent // Policy. This field is only populated with the use of CMPs that are // integrated with IAB TCF v2. Such CMPs use the raw Additional Consent // string to indicate vendors that are not registered with IAB, and // communicate end users' CMP choices to those vendors. The // consented_providers field contains the set of vendors that mirrors the // one represented by the additional_consent_string field, which is in the // raw form. Vendors or any other third-party service providers must not // create AC strings themselves. // // See https://support.google.com/admanager/answer/9681920 for more // details about this field. optional string additional_consent_string = 4; } // Information about the ad tech providers for whom the publisher has // specified to Google that its EEA user has consented to the use of their // personal data for ads personalization in accordance with Google's EU User // Consent Policy. This field will only be populated when regs_gdpr is true. optional ConsentedProvidersSettings consented_providers_settings = 42; // This field will be set to true in either of the two following cases: // 1. Google receives a valid IAB Transparency and Consent Framework (TCF) // v2 consent string and the Consent Management Platform indicates that // GDPR applies to this ad request. // 2. Google does not receive an IAB TCF v2 consent string and, based on // information available to Google, this impression will serve to an // EEA user. // It does not constitute legal guidance on GDPR. This field is equivalent // to Regs.ext.gdpr in Google OpenRTB. optional bool regs_gdpr = 43; // This field will be set to true when, based on information available to // Google, this impression will serve to a user in Brazil. See // https://storage.googleapis.com/adx-rtb-dictionaries/lgpd-providers.csv // for the list of ad tech providers that are allowed to // serve on LGPD-enforced requests. // // See https://support.google.com/authorizedbuyers/answer/9928204 for more // information on LGPD. optional bool regs_lgpd = 54; // Contains the Global Privacy Platform's consent string. See the Global // Privacy Platform specification for more details: // https://github.com/InteractiveAdvertisingBureau/Global-Privacy-Platform optional string gpp_consent_string = 81; // Array of the section(s) of the GPP string which should be applied for // this transaction. Generally will contain one and only one value, but // there are edge cases (e.g. a CMP cannot determine a single section ID) // where more than one may apply. GPP Section 3 (Header) and 4 (Signal // Integrity) do not need to be included. See IAB-GPP spec for details: // https://github.com/InteractiveAdvertisingBureau/Global-Privacy-Platform/blob/main/Sections/Section%20Information.md#section-ids repeated int32 gpp_section_ids = 82 [packed = true]; // The disallowed sensitive ad categories. See the // ad-sensitive-categories.txt file in the technical documentation for a // list of ids. You should enforce these exclusions if you have the ability // to classify ads into the listed categories. This field does not apply to // deals with block overrides (see // https://support.google.com/authorizedbuyers/answer/6114194). repeated int32 excluded_sensitive_category = 7 [packed = true]; // The allowed restricted ad categories for private and open auctions. See // the ad-restricted-categories.txt file in the technical documentation for // a list of ids. These only apply for private and open auction bids. See // the allowed_restricted_category_for_deals field for preferred deals or // programmatic guarantees. If you bid with an ad in a restricted category, // you MUST ALWAYS declare the category in the bid response regardless of // the values in this field. repeated int32 allowed_restricted_category = 16 [packed = true]; // The allowed restricted ad categories for preferred deals or programmatic // guarantees. See the ad-restricted-categories.txt file in the technical // documentation for a list of ids. These only apply for preferred deals or // programmatic guarantees. See the allowed_restricted_category field for // private and open auctions. In some cases, restricted categories are only // allowed on preferred deals or programmatic guarantees, so this field // lists all categories in allowed_restricted_category, and additionally, // restricted categories that are only allowed for preferred deals or // programmatic guarantees. If you bid with an ad in a restricted category, // you MUST ALWAYS declare the category in the bid response regardless of // the values in this field. repeated int32 allowed_restricted_category_for_deals = 22 [packed = true]; // List of creative languages allowed by the publisher. The order is // arbitrary. The codes are 2 or 5 characters and are documented at // https://developers.google.com/google-ads/api/data/codes-formats#languages. // When not set, all languages are allowed. repeated string allowed_languages = 27; // The disallowed ad product categories. See the ad-product-categories.txt // file in the technical documentation for a list of ids. You should enforce // these exclusions if you have the ability to classify ads into the listed // categories. This field does not apply to deals with block overrides (see // https://support.google.com/authorizedbuyers/answer/6114194). repeated int32 excluded_product_category = 13 [packed = true]; // Block list of applications by their platform-specific exchange // independent application identifiers. On Android, these should // be bundle or package names (for example, com.foo.mygame). // On iOS, these are numeric IDs. // Bids with ads that advertise any app from this list will be filtered // out before the auction. repeated string excluded_app_ids = 66; // A creative that is disallowed to bid on this impression due to Ad // Exchange policies or creative disapproval, excluded creative attributes, // excluded product or sensitive categories, allowed vendor types, // restricted categories or languages applicable to the bid request. message ExcludedCreative { // Buyer creative ID of the disallowed creative. optional string buyer_creative_id = 1; } // Creatives that are disallowed for the impression. Submitting a bid with // one of the creatives in this list will result in such bid being filtered // before the auction. Contact your account manager if you would like // to enable this feature. repeated ExcludedCreative excluded_creatives = 18; // Whether the adslot is only eligible for deals bids. Bids for the open // auction will be filtered when this field is set to true. Bidders can bid // on the open auction or deals when this field is set to false. optional bool only_deal_bids_accepted = 49; // Information about the pre-targeting configs that matched. message MatchingAdData { // The billing ids corresponding to the pretargeting configs that matched. repeated int64 billing_id = 2 [packed = false]; // The minimum CPM value that you can bid to not be filtered before the // auction. This may be a global minimum, or it may be a minimum set by // the publisher. The value is in micros of the bidding currency. // The bidding currency is determined by: // 1. The bidder-level currency, if configured. // 2. Otherwise, the currency of the buyer accounts indicated by the // billing IDs in the billing_id field. optional int64 minimum_cpm_micros = 5; // Information about any deals that matched for this inventory. message DirectDeal { // An id identifying the deal. optional int64 direct_deal_id = 1; // For deal_type=PREFERRED_DEAL or deal_type=PROGRAMMATIC_GUARANTEED, // you must bid at least fixed_cpm_micros (in micros of the bidding // currency) in order to participate in the deal. If you win, you will // be charged fixed_cpm_micros. For deal_type=PRIVATE_AUCTION or // deal_type=AUCTION_PACKAGE or deal_type=MARKETPLACE_PACKAGE, you must // bid at least fixed_cpm_micros. Bidding higher CPM than // fixed_cpm_micros will increase your chance to win when // deal_type=PRIVATE_AUCTION or deal_type=AUCTION_PACKAGE or // deal_type=MARKETPLACE_PACKAGE, however it will not increase your // chance to win for other types of deals. The bidding currency is // determined by: // 1. The bidder-level currency, if configured. // 2. Otherwise, the currency of the buyer accounts indicated by the // billing IDs in the billing_id field. optional int64 fixed_cpm_micros = 2; // The type of the deal. Note that Authorized Buyers policy overrides // apply to all Programmatic Guaranteed and Preferred Deal bids, and do // not apply to bids for other deal types. enum DealType { UNKNOWN_DEAL_TYPE = 0; // Bids are fixed-price and evaluated before the Open Auction. Bidders // are not required to bid with Preferred Deals when they are present // on the bid request. See // https://support.google.com/authorizedbuyers/answer/2604595 for more // information. PREFERRED_DEAL = 1; // Bids participate in a Private Auction against a select list of // buyers with specific floors. See // https://support.google.com/authorizedbuyers/answer/2839853 for more // information. PRIVATE_AUCTION = 2; // Bids are fixed-price and evaluated before the Open Auction. Bidders // are expected to bid with Programmatic Guaranteed deals whenever // they are present on a bid request in order to ensure that the // number of impressions agreed upon for a given deal are served. See // https://support.google.com/authorizedbuyers/answer/7174589 for more // information. PROGRAMMATIC_GUARANTEED = 3; // The deal ID is an identifier for a collection of Open Auction // inventory matching a given set of targeting criteria. See // https://support.google.com/authorizedbuyers/answer/7516884 for more // information. AUCTION_PACKAGE = 4; // Package of inventory that a publisher makes available to either all // buyers or selected bidders. Bids participate in auction in the same // way as private auction candidates. See // https://support.google.com/authorizedbuyers/answer/12817370 for // more information. MARKETPLACE_PACKAGE = 5; } optional DealType deal_type = 3 [default = UNKNOWN_DEAL_TYPE]; // Whether the publisher has exempted this deal from configured blocks. // This setting does not override AdX policies or Ad Review Center // decisions. optional bool publisher_blocks_overridden = 4 [default = false]; // Experimental field; subject to change. // An enum declaring the host of the creative, which will only be // populated for Programmatic Guaranteed deals. // Currently, this field should only ever be set to // CREATIVE_SOURCE_ADVERTISER. enum CreativeSourceType { CREATIVE_SOURCE_UNKNOWN = 0; // The creative is hosted by the advertiser, which means the bidder // is required to provide a creative in the bid response. CREATIVE_SOURCE_ADVERTISER = 1; // The creative is hosted by the publisher, which means the bidder // does not need to include a creative in the bid response. // For more information on publisher-hosted creatives, see // https://support.google.com/admanager/answer/9243220. // This feature isn't currently supported for RTB bidders. CREATIVE_SOURCE_PUBLISHER = 2; } optional CreativeSourceType creative_source = 16 [default = CREATIVE_SOURCE_ADVERTISER]; // This field is only applicable to Programmatic Guaranteed deals. The // buyer is allowed to skip bidding on the impression if this field is // false. When it is true, the buyer is required to bid on this deal for // this impression opportunity. optional bool must_bid = 9 [default = true]; // Constraints for creatives that can apply when bidding on a deal. message CreativeConstraints { // The allowed ad types of the deal. If empty, there are no // deal-specific allowed ad type restrictions for the deal. In that // case, bidders should refer to the BidRequest-level creative types // in adslot.allowed_ad_types. repeated AllowedAdType allowed_ad_types = 1 [packed = true]; // Whether skippable creatives are allowed. For // PROGRAMMATIC_GUARANTEED or PREFERRED_DEAL deals that specifically // allow video or audio ad types, it is always set. For the // skippability setting of other deal types or open auction bidding, // refer to the corresponding BidRequest-level field // video.video_ad_skippable. optional Video.SkippableBidRequestType video_ad_skippable = 2 [default = ALLOW_SKIPPABLE]; // The maximum allowed duration in milliseconds for the ad. For // PROGRAMMATIC_GUARANTEED or PREFERRED_DEAL deals that specifically // allow video or audio ad types, it is always set. For the allowed // max duration of other deal types or open auction bidding, refer to // the corresponding BidRequest-level field video.max_ad_duration. optional int32 max_ad_duration_ms = 3; } // Creative constraints for this deal. If this is not set, bidders // should refer to the BidRequest-level setting of each field. optional CreativeConstraints creative_constraints = 17; // If non-empty, this field contains a list of seat IDs in the bidder's // namespace set by media planners that are allowed by the publisher to // bid on this deal. All seat IDs not included in this list are blocked // from bidding on this deal. Bids on this deal on behalf of other // seats, as indicated by the BidResponse.ad.adslot.seat_id field, and // bids with no seat ID will be filtered before the auction. If this // field is empty, there are no restrictions on the seat IDs that can // bid on this deal. repeated string allowed_seat_ids = 18; } repeated DirectDeal direct_deal = 6; } repeated MatchingAdData matching_ad_data = 9; // If non-empty, this field contains a list of seat IDs in the bidder's // namespace set by media planners that are blocked by the publisher. Any // bids on behalf of a blocked seat, as indicated by the // BidResponse.ad.adslot.seat_id field, will be filtered before the auction. // If this field is non-empty, allowed_seat_ids will be empty. If this field // and allowed_seat_ids are both empty, there are no seat ID restrictions // for this request. repeated string blocked_seat_ids = 67; // If non-empty, this field contains a list of seat IDs in the bidder's // namespace set by media planners that are allowed by the publisher. All // seat IDs not included in this list are blocked. Bids on behalf of other // seats, as indicated by the BidResponse.ad.adslot.seat_id field, and bids // with no seat ID will be filtered before the auction. If this field is // non-empty, blocked_seat_ids will be empty. If this field and // blocked_seat_ids are both empty, there are no seat ID restrictions for // this request. repeated string allowed_seat_ids = 68; // The publisher settings list ids that apply to this slot. See the RTB // Publisher Settings guide at // https://developers.google.com/authorized-buyers/rtb/pub-settings-guide // for details. repeated fixed64 publisher_settings_list_id = 15; // Parameters related to exchange bidding (third party exchanges doing // real-time bidding on DFP). This is never populated in calls to AdX // real-time bidders. message ExchangeBidding { // Repeated KeyValue pairs to be sent from the publisher to the // exchange bidder. repeated KeyValue key_value = 3; } optional ExchangeBidding exchange_bidding = 28; // Parameters related to Open Bidding. message OpenBidding { // This field is set to true if the publisher set up a yield group or a // mediation group that targets this adslot and this bidder. See // https://support.google.com/admanager/answer/7128453 for information on // Open Bidding and its effects on the bidding process. optional bool is_open_bidding = 2; } optional OpenBidding open_bidding = 53; // AdUnitMapping is used to identify publisher inventory units in the // bidder's namespace. The mappings are only populated when // the bidder works directly with a publisher, and provides the mapping // from Google's ad unit namespace to the bidder's inventory namespace. // The ad unit mapping is only applicable for requests that use a custom // SDK. https://support.google.com/admanager/answer/9601810. message AdUnitMapping { // Key-value pair used to specify the inventory unit in the bidder's // namespace. message Keyval { // The key is the name of the bidder's inventory unit identifier for the // SDK. optional string key = 1; // The value of the bidder's inventory unit identifier for the given // format. optional string value = 2; } // Multiple key-value pairs can be specified in order to support // bidders whose inventory unit space is hierarchical and has multiple // identifiers. The key-value pairs for the chosen AdUnitMapping should be // sent back in the bid response as // BidResponse.ad.sdk_rendered_ad.sdk_params. This is passed to the // bidder's SDK. repeated Keyval keyvals = 1; // Possible ad unit formats that can be used for the mapping. Corresponds // to the adapter that will be used on the SDK. enum FormatType { FORMAT_UNKNOWN = 0; // Display banner ads for web or mobile apps. For example, a 320x50 // leaderboard slot. This includes out-stream video. FORMAT_BANNER = 1; // A full-screen ad to be displayed inside a mobile app. FORMAT_INTERSTITIAL = 2; // Custom display or video ads for web or mobile apps that match the // user experience of the site or app in which they’re placed. FORMAT_NATIVE = 3; // Video ads that appear before, during, or after video content // streams. FORMAT_VIDEO_VAST = 4; // Video ads for mobile apps that allow users to voluntarily watch an // ad in exchange for an in-app reward. FORMAT_REWARDED = 5; // Interstitial ads that allow users to watch an ad in exchange for // an in-app reward. Does not require opt-in. // https://support.google.com/admanager/answer/7386053 FORMAT_REWARDED_INTERSTITIAL = 6; // App open ads shows at app load screens. App open ads can be closed // at any time, and are designed to be shown when the users bring the // app to the foreground. FORMAT_APP_OPEN = 7; } // The mappings are targeted through a format, which is expressed in the // Google-defined taxonomy. Format is populated in the bid request since // Google supports targeting multiple formats with a single ad // unit, and Google's definition of the format may not match the bidder's // definition. In order for the bidder to differentiate which format // matched, it is sent in the bid request. optional FormatType format = 2; } // Ad unit mappings that match the given adslot. repeated AdUnitMapping ad_unit_mapping = 64; // Indicates the creative policy and publisher blocks that applies to this // request. message CreativeEnforcementSettings { // Creative policy enforcement level that applies to this request. // Creatives that don't adhere to the specified policy will be filtered // before the auction. The status of the creatives with their respective // policies can be retrieved through Creative API. // https://developers.google.com/authorized-buyers/apis/guides/rtb-api/creatives // Bids on deals may override the policy enforcement applicable to the // request. enum PolicyEnforcement { POLICY_ENFORCEMENT_UNKNOWN = 0; // Baseline policy for all ads serving through any of Google's ads // platform products. Learn more at: // https://support.google.com/platformspolicy/answer/3013851. POLICY_ENFORCEMENT_PLATFORM_POLICY = 1; // Policy for ads serving through Google's ad network. This includes the // baseline policy for all ads serving through any of Google's ads // platform products. Learn more at: // https://support.google.com/authorizedbuyers/answer/1325008. POLICY_ENFORCEMENT_NETWORK_AND_PLATFORM_POLICY = 2; } optional PolicyEnforcement policy_enforcement = 1; // Creative publisher blocks enforcement level that applies to this // request. Publisher blocks allow publishers to control which creatives // can be shown on their properties. // Deals may also override publisher blocks. Refer to adslot. // matching_ad_data.direct_deal.publisher_blocks_overridden field. enum PublisherBlocksEnforcement { PUBLISHER_BLOCKS_ENFORCEMENT_UNKNOWN = 0; // The publisher's blocking controls are enforced on creatives // submitted. Publisher blocks enforcement settings are provided in the // following fields: // - publisher_settings_list_id // - excluded_sensitive_category // - allowed_restricted_category // - excluded_product_category // - allowed_vendor_type // - excluded_attribute PUBLISHER_BLOCKS_ENFORCEMENT_APPLIES = 1; // The publisher's blocking controls are not enforced on creatives // submitted. PUBLISHER_BLOCKS_ENFORCEMENT_OVERRIDDEN = 2; } optional PublisherBlocksEnforcement publisher_blocks_enforcement = 3; } optional CreativeEnforcementSettings creative_enforcement_settings = 58; // The ad unit code (https://support.google.com/admanager/topic/4426071) // This is currently only set for exchange bidding requests. optional string dfp_ad_unit_code = 33; // Visibility information for the slot. enum SlotVisibility { NO_DETECTION = 0; ABOVE_THE_FOLD = 1; BELOW_THE_FOLD = 2; } optional SlotVisibility slot_visibility = 12 [default = NO_DETECTION]; // Viewability percentage for the ad slot. This is an estimate of the // likelihood that this slot will be viewable by the end user based on // historical and environment data. It is expressed as a percentage in the // range of [0, 100]. The default value -1 indicates that viewability could // not be estimated. optional int32 viewability = 21 [default = -1]; // Historical click-through rate for ads served in the ad slot. This is // expressed as a fraction in the range [0.0, 1.0]. The default value of // -1.0 indicates that historical click-through rate data is not available. // This figure does not include data aggregated from Google Ads. The // click-through rate can vary for a given ad slot throughout the day. optional float click_through_rate = 25 [default = -1]; // Historical completion rate for video ads served in the ad slot. This is // expressed as a fraction in the range [0.0, 1.0]. The default value of // -1.0 indicates that historical completion rate data is not available. // This field is only applicable to video inventory, and does not include // data aggregated from Google Ads. optional float video_completion_rate = 30 [default = -1]; // iFraming state of the ad slot on the webpage where it is present. enum IFramingState { UNKNOWN_IFRAME_STATE = 0; NO_IFRAME = 1; SAME_DOMAIN_IFRAME = 2; CROSS_DOMAIN_IFRAME = 3; } optional IFramingState iframing_state = 19 [default = UNKNOWN_IFRAME_STATE]; // iFrame depth of the ad slot on the webpage where it is present. // Currently only set for video ad requests. enum IFramingDepth { UNKNOWN_IFRAME_DEPTH = 0; NOT_IN_IFRAME = 1; ONE_IFRAME = 2; MULTIPLE_IFRAME = 3; } optional IFramingDepth iframing_depth = 20 [default = UNKNOWN_IFRAME_DEPTH]; // A native ad consists of pieces that are rendered by the publisher. A // publisher may support multiple distinct native ad templates. If the // request also allows banners or videos, you can respond with other types // of ads by setting html_snippet or video_url instead. If only native // templates exist, you must set the native_ad field in any response you // send. message NativeAdTemplate { // Bitfield describing which fields are required by the publisher. Bid // responses with no value for these fields will be rejected. Click and // view tracking urls are always implicitly required. optional int64 required_fields = 1; // Bitfield describing which fields are recommended by the publisher. All // recommended fields are supported, but not all recommended fields are // required. optional int64 recommended_fields = 2; // max_safe_length indicates the maximum number of Unicode characters that // are guaranteed to be shown without truncation. Longer strings may be // truncated and ellipsized by Ad Exchange or the publisher during // rendering. optional int32 headline_max_safe_length = 3; optional int32 body_max_safe_length = 4; optional int32 call_to_action_max_safe_length = 5; optional int32 advertiser_max_safe_length = 6; optional int32 price_max_safe_length = 15; // The width and height from which to calculate the required aspect ratio. // You can provide a larger image in the response. Images that have aspect // ratios substantially different than those implied by the height and // width may be filtered. optional int32 image_width = 7; optional int32 image_height = 8; optional int32 logo_width = 9; optional int32 logo_height = 10; optional int32 app_icon_width = 11; optional int32 app_icon_height = 12; // Globally distinct id for the specific style, HTML, and CSS with which // the native ad is rendered. optional int32 style_id = 16; // Type of style layout for each native ad template. enum LayoutType { PIXEL = 0; FLUID = 1; } optional LayoutType style_layout_type = 17 [default = PIXEL]; // If the style_layout_type is Pixel, width and height of the // entire native ad after rendering. If the style_layout_type is // Fluid, the style_height and style_width may optionally // not be populated. optional int32 style_height = 18; optional int32 style_width = 19; // Defines the bits used in required_fields and recommended_fields. There // is one bit for each of the fields in BidResponse.Ad.NativeAd enum Fields { NO_FIELDS = 0; HEADLINE = 1; BODY = 2; CALL_TO_ACTION = 4; ADVERTISER = 8; IMAGE = 16; LOGO = 32; APP_ICON = 64; STAR_RATING = 128; PRICE = 256; DEPRECATED_STORE = 512; VIDEO = 1024; } } repeated NativeAdTemplate native_ad_template = 51; // NativePlacementType describes placement of native ad slot with respect to // surrounding context. enum NativePlacementType { PLACEMENT_UNKNOWN = 0; // In the feed of content - for example as an item inside the organic // feed/grid/listing/carousel. PLACEMENT_IN_FEED = 1; // In the atomic unit of the content - for example, in the article page or // single image page. PLACEMENT_ATOMIC_UNIT = 2; // Outside the core content - for example in the ads section on the right // rail, as a banner-style placement near the content, or another // placement type. PLACEMENT_OUTSIDE = 3; // Recommendation widget, most commonly presented below the article // content. PLACEMENT_RECOMMENDATION = 4; } optional NativePlacementType native_placement_type = 45 [default = PLACEMENT_UNKNOWN]; // Whether the ad request has been determined to come directly from the // publisher. enum MediationStatus { UNKNOWN = 0; DIRECT_REQUEST = 1; } optional MediationStatus mediation_status = 52 [default = UNKNOWN]; // Auto refresh settings. message AutoRefresh { message AutoRefreshSettings { enum AutoRefreshType { UNKNOWN_AUTO_REFRESH_TYPE = 0; // Refresh triggered by user-initiated action such // as scrolling. USER_ACTION = 1; // Event-driven content change. For example, ads refresh // when the football game score changes on the page. EVENT = 2; // Time-based refresh. Ads refresh on a predefined time // interval even without user activity. TIME = 3; } // The type of the declared auto refresh. optional AutoRefreshType refresh_type = 1 [default = UNKNOWN_AUTO_REFRESH_TYPE]; // The minimum refresh interval. This applies to all refresh types. optional int32 min_refresh_interval_seconds = 2; } // The auto-refresh settings that the publisher has on this // inventory. This is repeated because publishers may // do multiple types of auto refresh on one piece of inventory. repeated AutoRefreshSettings refresh_settings = 1; // The number of times this ad slot had been refreshed since last page // load. optional int32 refresh_count = 2 [default = 0]; } optional AutoRefresh auto_refresh = 23; // Stickiness settings declared by the publisher. message StickySettings { // Specifies the allowable sticky settings values. enum Stickiness { UNKNOWN_STICKINESS = 0; IS_STICKY = 1; } // Whether the ad slot is a sidebar that sticks on screen when user // scrolls. optional Stickiness vertical_stickiness = 1 [default = UNKNOWN_STICKINESS]; // Whether the ad slot is a horizontal slot that sticks on the top of the // screen when user scrolls. optional Stickiness top_horizontal_stickiness = 2 [default = UNKNOWN_STICKINESS]; // Whether the ad slot is a horizontal slot that sticks on the bottom of // the screen when user scrolls. optional Stickiness bottom_horizontal_stickiness = 3 [default = UNKNOWN_STICKINESS]; } optional StickySettings sticky_settings = 31; // Sources for non-browser inventory. enum NonBrowserSource { UNDECLARED_SOURCE = 0; DESKTOP_APP = 1; } // Publisher declaration stating that this ad slot may serve on // non-browser inventory, like desktop apps. optional NonBrowserSource non_browser_slot_source = 34 [default = UNDECLARED_SOURCE]; // Defines who controls the environment that made the ad request and will // render the ad. On platforms where code written by Google will handle // the ad this field is set to GOOGLE. When this field is PUBLISHER the // publisher has placed their own code on the device to handle playback of // the ad. There is no technical difference in how these request are // handled. You may use this field to differentiate between different // environments for non-technical reasons. This field is only set for // requests that allow VAST video ads. enum Renderer { UNKNOWN_RENDERER = 0; GOOGLE = 1; PUBLISHER = 2; } optional Renderer renderer = 26 [default = UNKNOWN_RENDERER]; // Whether this request is for an Accelerated Mobile Page (AMP). AMP HTML // pages load faster, by restricting parts of HTML, CSS and Javascript. For // more information on how AMP ads render, refer to the AMP ads README: // https://github.com/ampproject/amphtml/blob/master/ads/README.md enum AmpAdRequestType { // AMP status unknown. Request may or may not be from an AMP page. UNKNOWN_AMP = 0; // Not an AMP page. Could be regular HTML, VAST video, or other context. NON_AMP_PAGE = 1; // Late-loading request from an AMP HTML page. Ad will render with a // slight delay so it will not negatively impact page render performance. AMP_PAGE_LATE_REQUEST = 2; } optional AmpAdRequestType amp_ad_request_type = 29 [default = NON_AMP_PAGE]; // Whether this is an AMP page or not. enum AmpPage { // AMP page status unknown. UNKNOWN_AMP_PAGE = 0; // This is not an AMP page. DIALECT_HTML = 1; // This is an Amp page. DIALECT_HTML_AMP = 2; } optional AmpPage is_amp_page = 38; // Possible requirement types for AMP ads. enum AmpAdRequirementType { // AMP ad requirements unknown. UNKNOWN_AMP_AD_REQUIREMENT_TYPE = 0; // AMP ads are not allowed. AMP_AD_NOT_ALLOWED = 1; // Either AMP ads or non-AMP ads are allowed; // AMP ads are not early rendered. AMP_AD_ALLOWED_AND_NOT_EARLY_RENDERED = 2; // Either AMP ads or non-AMP ads are allowed; // AMP ads are early rendered. AMP_AD_ALLOWED_AND_EARLY_RENDERED = 3; // AMP ads are required. // Ads that are non-AMP may be rejected by the publisher. AMP_AD_REQUIRED = 4; } optional AmpAdRequirementType amp_ad_requirement_type = 39; // Whether the user receives a reward for viewing the ad. For video ads, // typical implementations allow users to read an additional news article // for free, receive an extra life in a game, or get a sponsored ad-free // music session. The reward is typically distributed after the video ad is // completed. optional bool is_rewarded = 32 [default = false]; // Possible ad types that are allowed in the bid response. allowed_ad_types // always contains one or more values. Interstitial slots may also support // banner ads. An ad slot with ALLOWED_AD_TYPE_NATIVE may or may not support // native video, regardless of whether ALLOWED_AD_TYPE_VIDEO is set. // Likewise, an ad slot without ALLOWED_AD_TYPE_NATIVE does not support // native video, regardless of whether ALLOWED_AD_TYPE_VIDEO is set. enum AllowedAdType { UNKNOWN_ALLOWED_AD_TYPE = -1; ALLOWED_AD_TYPE_BANNER = 0; ALLOWED_AD_TYPE_NATIVE = 1; ALLOWED_AD_TYPE_VIDEO = 2; ALLOWED_AD_TYPE_AUDIO = 3; } repeated AllowedAdType allowed_ad_types = 36 [packed = true]; // Total number of impressions served to this user (within this specific // site or app) in this browsing session, plus 1. A session ends after 30 // minutes inactivity. The default value of -1 indicates that the session // depth cannot be estimated. optional int32 session_depth = 40 [default = -1]; // Secure signals passed by the publisher. message SecureSignal { // The source (provider) of the signal. Identifier for the library or SDK // that generated this data. optional string source = 4; // The secure signal. optional string data = 2; } repeated SecureSignal secure_signals = 41; // Possible ad rendering API frameworks that can be supported. // If an API is not explicitly listed, it is assumed not to be supported. enum APIFramework { UNKNOWN_FRAMEWORK = 0; // Mobile Rich Media Ad Interface Definitions Version 1.0. See // https://www.iab.com/guidelines/mraid/. MRAID_1 = 3; // Mobile Rich Media Ad Interface Definitions Version 2.0. See // https://www.iab.com/guidelines/mraid/. MRAID_2 = 5; // Mobile Rich Media Ad Interface Definitions Version 3.0. See // https://www.iab.com/guidelines/mraid/. MRAID_3 = 6; // Open Measurement Interface Definition Version 1.0. See // https://iabtechlab.com/standards/open-measurement-sdk/. OMID_1 = 7; } // List of supported API frameworks for this impression. repeated APIFramework api = 46 [packed = true]; // Deprecated. This will be removed in Q1 2024. This field has been // deprecated in favor of the repeated field // `billable_event_rate_bid_adjustment` below. // For ads rendered using a custom SDK only: multiplier applied to bid in // the auction. The adjustment reflects the likelihood that your bid would // generate a billable event (meaning the ad renders successfully) if // it won the auction, relative to the probability that other bids generate // a billable event if they won the auction. This adjustment can be larger // or smaller than 1. This affects the final ranking in the auction only; in // particular, this multiplier does not affect the payment. optional double billable_event_rate_adjustment = 59 [deprecated = true, default = 1]; // The billable event rate bid adjustment of an ad and the dependent // features of the ad the adjustment applies to, such as the format or the // SDK used to render the ad. Each feature combination may have a unique // adjustment, each adjustment therefore specifies which SDK or creative // format it applies to. message BillableEventRateBidAdjustment { // A multiplier to your bid to adjust for the likelihood that your bid // would result in a billable event (namely, the ad renders successfully) // if it won the auction, relative to the average probability that bids // from other buyers would result in a billable event if they won the // auction. This adjustment can be larger or smaller than 1. This affects // the final ranking in the auction only; in particular, this multiplier // does not affect the payment or whether the bid clears any floor price. optional float bid_adjustment = 1 [default = 1]; // The types of creative the bid adjustments can apply to. enum CreativeType { CREATIVE_TYPE_UNKNOWN = 0; // Banner ads HTML_SNIPPET = 1; // VAST video or audio ads VIDEO_VAST = 2; // Native ads NATIVE = 3; // SDK rendered ad SDK_RENDERED = 4; } // The type of ads to which the above bid adjustment applies to. Each type // corresponds to different ways of how the ad's creative is specified, as // described in // https://developers.google.com/authorized-buyers/rtb/response-guide#specify-creative. // If the ad is SDK-rendered, this will be set to SDK_RENDERED regardless // of the actual creative type. optional CreativeType creative_type = 2 [default = CREATIVE_TYPE_UNKNOWN]; // The SDK used to render the ad with. The SDK ID will match the one sent // in BidRequest.mobile.installed_sdk.id. This field is not set for Google // SDK. optional Mobile.InstalledSdk sdk = 3; } // A list of billable event rate bid adjustments applicable to the request // and the ad features associated to the adjustment. Bid adjustments are // listed here only if they are not equal to 1.0, which is equivalent to // having no adjustment. This field replaces the deprecated field // billable_event_rate_adjustment. repeated BillableEventRateBidAdjustment billable_event_rate_bid_adjustment = 65; // Identifier of the OM SDK integration. For more info, see the OpenRTB // Advisory for Open Measurement SDK: // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/OpenRTB%20support%20for%20OMSDK.md#openrtb-and-adcom. optional string omidpn = 56; // Version of the OM SDK integration. For more info, see the OpenRTB // Advisory for Open Measurement SDK: // https://github.com/InteractiveAdvertisingBureau/AdCOM/blob/master/OpenRTB%20support%20for%20OMSDK.md#openrtb-and-adcom. optional string omidpv = 57; // Describes the environment where the ad auction is run. enum AuctionEnvironment { // The auction determining the winning ad is held server-side. SERVER_SIDE_AUCTION = 0; // The contextual auction that determines a winning contextual bid is held // server-side, and bidding functions are run on the device to determine // interest group bids. Both the winning contextual bid and interest // group bids are entered into a final auction held on the device to // select the winning ad. For more information regarding the Protected // Audience API, see: // https://github.com/WICG/turtledove and // https://github.com/WICG/turtledove/blob/main/FLEDGE.md ON_DEVICE_INTEREST_GROUP_AUCTION = 1; } // Specifies where the ad auction runs. // Deprecated. This will be removed in November, 2023. Use // supported_auction_environment instead. optional AuctionEnvironment auction_environment = 61 [deprecated = true, default = SERVER_SIDE_AUCTION]; // The supported auction environment for this impression. For inventory // which does not support interest group bidding, this will always be set to // SERVER_SIDE_AUCTION. For inventory which does support interest group // bidding, this will be set to ON_DEVICE_INTEREST_GROUP_AUCTION. Note that // this only indicates that the interest group auction is supported, not // that it is guaranteed to execute. If no buyer chooses to participate in // the interest group auction, then the interest group auction will be // skipped and the winner of the contextual auction, if any, will be // served instead. optional AuctionEnvironment supported_auction_environment = 69 [default = SERVER_SIDE_AUCTION]; // The expected time period when an impression can occur in seconds // following a winning bid. The impression may be billable only if it serves // within this time. To learn more about impression expiration, see the // following guide: // https://developers.google.com/authorized-buyers/rtb/billing-event-guide optional int32 impression_expiration_seconds = 63; // The name of the rendering environment, such as a mobile ads or video // SDK, or a publisher ad tag type. This field describes a Google SDK while // the installed_sdk field describes third party SDKs. optional string display_manager = 71; // Version of the rendering environment specified by the display_manager // field. This field describes a Google SDK while the installed_sdk field // describes third party SDKs. optional string display_manager_version = 72; } repeated AdSlot adslot = 14; // Feedback on bids submitted in previous responses. This is only set if // real-time feedback is enabled for your bidder. Contact your account // manager if you want to enable real-time feedback. message BidResponseFeedback { // The unique id from BidRequest.id optional bytes request_id = 1; // The index of the BidResponse_Ad if there was more than one. The index // starts at zero for the first creative. optional int32 creative_index = 2; // The status code for the ad. See creative-status-codes.txt in the // technical documentation for a list of ids. optional int32 creative_status_code = 3; // If the bid won the auction, this is the price paid in your account // currency. If the bid participated in the auction but was out-bid, this // is the CPM that should have been exceeded in order to win. This is not // set if the bid was filtered prior to the auction, if the publisher or // winning bidder has opted out of price feedback or if your account has // opted out of sharing winning prices with other bidders. For first-price // auctions, minimum_bid_to_win is populated instead of this field. optional int64 cpm_micros = 4; // The minimum bid value necessary to have won the auction, in micros of // your account currency. If your bid won the auction, this is the second // highest bid that was not filtered (including the floor price). If your // bid did not win the auction, this is the winning candidate's bid. This // field will only be populated if your bid participated in a first-price // auction, and will not be populated if your bid was filtered prior to the // auction. optional int64 minimum_bid_to_win = 7; // The minimum bid value necessary to have won the server-side component of // the overall auction given that there was also an interest group bidding // component to the overall auction which ran using the Protected Audience // API. The value is expressed in CPM micros of the buyer account currency. // The minimum bid to win for the overall auction, including bids from the // server-side and the on-device interest group components, is populated in // the minimum_bid_to_win field of the same BidResponseFeedback object. optional int64 server_side_component_minimum_bid_to_win = 16; // Billable event rate multiplier that was applied to this bid during // ranking. The adjustment reflects the likelihood that your bid would // generate a billable event (namely, the ad renders successfully) if it won // the auction, relative to the probability that other bids generate a // billable event if they won the auction. This adjustment can be larger or // smaller than 1. This affects the final ranking in the auction only; in // particular, this multiplier does not affect the payment or whether the // bid clears any floor price. optional float billable_event_rate_bid_adjustment = 15 [default = 1]; // When a publisher uses an RTB auction and waterfall-based SDK mediation on // the same query, the winner of the real-time auction must also compete in // a mediation waterfall (which is ordered by price) to win the impression. // If the bid participated in the auction and there was no waterfall, the // value of this field is 0. If the bid participated in the auction and // there was a waterfall, the value of this field is a price representing a // sample bid from the eligible mediation networks that were higher than the // auction winner, weighted by expected fill rate. This field can be used // in conjunction with minimum_bid_to_win to train bidding models. The CPM // is in micros of your account currency. optional int64 sampled_mediation_cpm_ahead_of_auction_winner = 10; // Event notification token that was included in the bid response. optional bytes event_notification_token = 5; // Buyer creative ID that was included in the bid response. optional string buyer_creative_id = 6; // Possible types of bid response feedback objects. enum FeedbackType { FEEDBACK_TYPE_UNSPECIFIED = 0; // Feedback for a bid that was submitted on a bid response. BID_FEEDBACK = 1; // Feedback for an interest group buyer submitted on a bid response to // particpate in an interest group bidding component of the auction run // using the Protected Audience API. INTEREST_GROUP_BUYER_FEEDBACK = 2; } // The type of the BidResponseFeedback message. Google will send separate // BidResponseFeedback objects for: // a) Each bid submitted on a bid response // b) Each buyer submitted on a bid response to particpate in an interest // group bidding component of the auction run using the Protected Audience // API. optional FeedbackType feedback_type = 17; // Origin of an interest group buyer that was included in the bid response. // This field is populated only for feedback where a bidder opted in an // interest group buyer to participate in the interest group bidding // component of the overall auction run using the Protected Audience API. // To learn more about origins, see https://www.rfc-editor.org/rfc/rfc6454. // To learn more about interest group bidding and the Protected Audience // API, see // https://developers.google.com/authorized-buyers/rtb/fledge-origin-trial. optional string buyer_origin = 18; // The status code for the submitted interest group buyer. This field is // only populated in the feedback for an interest group buyer that a bidder // requested to enter into the interest group auction through the bid // response. Individual creative status codes of bids submitted by the buyer // in the on-device interest group auction are not available. See // https://storage.googleapis.com/adx-rtb-dictionaries/interest-group-buyer-status-codes.txt // for a list of interest group buyer status codes. optional int32 interest_group_buyer_status_code = 19; } repeated BidResponseFeedback bid_response_feedback = 44; // How many milliseconds Google will wait for a response before ignoring it. optional int32 response_deadline_ms = 57; // ----------------------------------------------------------- // Testing options. // // If true, then this is a test request. Results will not be displayed to // users and you will not be billed for a response even if it wins the // auction. You should still do regular processing since the request may be // used to evaluate latencies or for other testing. During your initial // testing with Google traffic any response that you make will be filtered // out of the auction whether this option has a value of true or false. optional bool is_test = 15 [default = false]; // If true, then this request is intended to measure network latency. // Return an empty BidResponse with only processing_time_ms set as quickly as // possible without executing any bidding logic. optional bool is_ping = 17 [default = false]; // If true, then the callout model predicted that you will not bid // on this request. We send a sampled percentage of such requests so that we // can automatically update the model when bidding patterns change. optional bool is_predicted_to_be_ignored = 45 [default = false]; // SupplyChain object. For more information, see // https://github.com/InteractiveAdvertisingBureau/openrtb/blob/master/supplychainobject.md. message SupplyChain { // Indicates whether the chain contains all nodes involved in the // transaction leading back to the owner of the site, app or other medium of // the inventory. optional bool complete = 1; message SupplyChainNode { // The canonical domain name of the SSP, Exchange, Header Wrapper, etc // system that bidders connect to. This may be the operational domain of // the system, if that is different than the parent corporate domain, to // facilitate WHOIS and reverse IP lookups to establish clear ownership of // the delegate system. This should be the same value as used to identify // sellers in an ads.txt file if one exists. optional string advertising_system_identifier = 1; // The identifier associated with the seller or reseller account within // the advertising system. This must contain the same value used in // transactions, specifically the publisher_id field in the Google // protocol. Should be limited to 64 characters in length. optional string seller_identifier = 2; // Indicates whether this node will be involved in the flow of payment for // the inventory. When set to true, the advertising system in the // advertising_system_identifier field pays the seller in the // seller_identifier field, who is responsible for paying the previous // node in the chain. When set to false, this node is not involved in the // flow of payment for the inventory. optional bool handles_payment = 6; } // Array of SupplyChainNode objects in the order of the chain. In a complete // supply chain, the first node represents the initial advertising system // and seller ID involved in the transaction, for example, the owner of the // site, app, or other medium. In an incomplete supply chain, it represents // the first known node. The last node represents the entity sending this // bid request. repeated SupplyChainNode nodes = 2; // Version of the supply chain specification in use, in the format of // "major.minor". For example, for version 1.0 of the spec, use the string // "1.0". optional string version = 3; } optional SupplyChain supply_chain = 69; // Experimental feature; may be subject to change. See // https://support.google.com/authorizedbuyers/answer/10890762 for more // information. // // Describes the scope of frequency cap enforcement available for this // request. Frequency caps to be enforced for a bid can be specified in the // BidResponse.ad.adslot.frequency_cap field. enum FrequencyCappingScope { // Default value which should not be used, or which can indicate that // frequency cap scope could not be reliably determined. FREQUENCY_CAPPING_SCOPE_UNKNOWN = 0; // Frequency capping based on bid response specifications is not available // for this request. A frequency-capped bid for a bid request with no // frequency cap availability will be filtered prior to the auction. FREQUENCY_CAPPING_SCOPE_NONE = 1; // Frequency capping enforcement is available across multiple sites within // the same browser. FREQUENCY_CAPPING_SCOPE_BROWSER = 2; // Frequency capping enforcement is available across multiple apps on the // device, excluding browsers. FREQUENCY_CAPPING_SCOPE_DEVICE = 3; // Frequency capping enforcement is available within a single app. FREQUENCY_CAPPING_SCOPE_APP = 4; // Frequency capping enforcement is available within a single site. FREQUENCY_CAPPING_SCOPE_SITE = 5; } optional FrequencyCappingScope frequency_capping_scope = 70; // The Digital Services Act (DSA) transparency requirements. See // https://support.google.com/admanager/answer/14335032. message Dsa { // Values indicating whether DSA declarations should be included in the bid // response and, if so, whether or not the publisher is an Online Platform // (OP) or Very Large Online Platform (VLOP), as defined by the DSA. enum DsaSupport { DSA_SUPPORT_UNKNOWN = 0; // DSA declarations are not required in the bid response. NOT_REQUIRED = 1; // DSA declarations are supported, but not required in the bid response. SUPPORTED = 2; // DSA declarations are required in the bid response. REQUIRED = 3; // DSA declarations are required in the bid response and the publisher is // an OP or VLOP. REQUIRED_BY_ONLINE_PLATFORM = 4; } // Indicates if DSA declarations should be included in the bid response. // Bids where DSA declarations are required but not included will not be // accepted. optional DsaSupport dsa_support = 1; // Options describing a publisher's ability to render DSA transparency // declarations. enum PublisherRenderingSupport { PUBLISHER_RENDERING_SUPPORT_UNKNOWN = 0; // Publisher can't render. PUBLISHER_UNABLE_TO_RENDER = 1; // Publisher could render depending on the buyer's rendering capability as // described in the BidResponse.ad.dsa_transparency.buyer_render field. PUBLISHER_CAN_RENDER = 2; // Publisher will render regardless of the buyer's rendering capability as // described in the BidResponse.ad.dsa_transparency.buyer_render field. PUBLISHER_WILL_RENDER = 3; } // Indicates if the publisher will render the DSA Transparency info. This // will signal if the publisher is able to and intends to render the icon // or other appropriate user-facing symbol and display the DSA transparency // info to the end user. optional PublisherRenderingSupport publisher_rendering_support = 2; // Options describing if a publisher requires DSA transparency declarations. enum DataToPublisher { DATA_TO_PUBLISHER_UNKNOWN = 0; // Do not send transparency data. DO_NOT_SEND = 1; // Optional to send transparency data. OPTIONAL = 2; // Send transparency data. SEND = 3; } // Indicates whether the bidder should provide DSA transparency declarations // in the bid response. A publisher may need this information for audit or // other purposes, even if they will not render the transparency // declarations themselves. optional DataToPublisher data_to_publisher = 3; } // The Digital Services Act (DSA) transparency information requirements. optional Dsa dsa = 86; } // This is the message that you return in response to a BidRequest. You may // specify zero or more ads. For each ad, you should provide an ad slot on // which the ad can run. An ad slot is identified by the AdSlot.id from the // BidRequest. If you do not want to bid, submit a response with no ads and // with only the processing_time_ms set. message BidResponse { message Ad { // The event notification token is sent to AdX by bidders for // troubleshooting. AdX will include the token in real-time feedback for the // bid. The content of the token will not be logged by AdX. AdX will ignore // any token longer than 128 bytes. optional bytes event_notification_token = 25; // A unique identifier chosen by you for the creative in this response. // This must always be set, must be limited to at most 64 bytes, and must be // a valid UTF8 string. Every buyer_creative_id you use must always be // associated with the same creative. This field is used to communicate // approval statuses when issues are found. Do not specify the same id for // different creatives, or all creatives will be disapproved if a problem // with a single creative is found. Do not specify different ids for the // same creative in different responses or no creatives will be served since // approval status is assigned on a per-id basis. optional string buyer_creative_id = 10; // Only one of the following should be set: // 1) html_snippet, 2) video_url, 3) native_ad, or 4) sdk_rendered_ad. // // The HTML snippet that will be placed on the web page to display the ad. // Use BidResponse.Ad.AdSlot.billing_id to indicate which billing id // this snippet is attributed to. optional string html_snippet = 1; // The URL to fetch a video ad. The URL should return an XML response that // conforms to the VAST 2.0 or 3.0 standard. Use // BidResponse.Ad.AdSlot.billing_id to indicate which billing id to // attribute this ad to. Only one of the following should be set: // html_snippet, video_url. Only set this field if the BidRequest is for an // in-video ad (BidRequest.video is present). optional string video_url = 9; // The VAST document to be returned. This document should conform to the // VAST 2.0 or 3.0 standard. Use BidResponse.Ad.AdSlot.billing_id to // indicate which billing ID to attribute this ad to. // Only set this field if the BidRequest is for an in-video ad and the // response is VAST XML. optional string video_vast_xml = 24; // The URL to fetch an AMPHTML ad. Only one of the following should be set: // html_snippet, video_url, amp_ad_url, native_ad. optional string amp_ad_url = 23; // The content of a native ad. Native ads consist of multiple building // blocks, which are rendered by the publisher. Only one of the following // should be set: html_snippet, video_url, or native_ad. // Only set this field if the BidRequest is for a native ad // (BidRequest.adslot.native is present). message NativeAd { // A video in the form of either a URL for a VAST tag, or an in-line VAST // tag. Only set this field if VIDEO is required or recommended in the // BidRequest's NativeAdTemplate. oneof video { // The URL to fetch a video ad. The URL should return an XML response // that conforms to VAST standards. string video_url = 13; // The VAST document to be returned. Max size is 100kB. string video_vast_xml = 16; } // A short title for the ad. optional string headline = 1; // A long description of the ad. optional string body = 2; // A label for the button that the user is supposed to click optional string call_to_action = 3; // The name of the advertiser or sponsor, to be displayed in the ad // creative. optional string advertiser = 4; message Image { optional string url = 1; // Image width and height are specified in pixels. You may provide a // larger image than was requested, so long as the aspect ratio is // preserved. optional int32 width = 2; optional int32 height = 3; } // A large image. optional Image image = 5; // A smaller image, for the advertiser's logo. optional Image logo = 6; // The app icon, for app download ads. optional Image app_icon = 7; // The app rating in the app store. Must be in the range [0-5]. optional double star_rating = 8; // The URL that the browser/SDK will load when the user clicks the ad. // This can be the landing page directly, or the first step of a redirect // chain that eventually leads to it. For backward compatibility, if this // is not set, the first Ad.click_through_url is used. optional string click_link_url = 14; // This field is deprecated in favor of the repeated click_tracking_urls // field at the BidResponse.Ad level. It will be removed at the end of // Q2 2022. // The URL to use for click tracking. The SDK pings click tracking url on // a background thread. When resolving the url, HTTP 30x redirects are // followed. The SDK ignores the contents of the response; this URL // has no effect on the landing page for the user. optional string DEPRECATED_click_tracking_url = 11 [deprecated = true]; // This field is deprecated in favor of the click_tracking_urls // field at the BidResponse.Ad level. It will be removed at the end of // Q2 2022. // The URLs to use for click tracking. This will be used throughout the // serving stack and will incorporate any URL in click_tracking_url. repeated string DEPRECATED_click_tracking_urls = 15 [deprecated = true]; // The price of the promoted app including the currency info. optional string price = 10; } optional NativeAd native_ad = 18; // The set of destination URLs for the snippet. This includes the URLs that // the user will go to if they click on the displayed ad, and any URLs that // are visible in the rendered ad. Do not include intermediate calls to the // adserver that are unrelated to the inal landing page. A BidResponse that // returns a snippet or video ad but declares no click_through_url will be // discarded. Only set this field if html_snippet or video_url or native_ad // are set. This data is used as a destination URL declaration, for example // for post-filtering of publisher-blocked URLs or ad categorization. // // For non-native ads, it is not used for click tracking or any // other ad functionality; it is only used as a destination URL // declaration. // // For native ads, if NativeAd.click_link_url is not set, the first // value of click_through_url is used to direct the user to the landing // page. In addition, all values are used as destination // URL declarations (similar to the non-native case). repeated string click_through_url = 4; // All vendor types for the ads that may be shown from this snippet. You // should only declare vendor ids listed in the vendors.txt file in the // technical documentation. We will check to ensure that the vendors you // declare are in the allowed_vendor_type list sent in the BidRequest for // AdX publishers. repeated int32 vendor_type = 5; // All attributes for the ads that may be shown from this snippet. See // buyer-declarable-creative-attributes.txt in the technical documentation // for a list of ids. We will check to ensure none of these attributes are // in the excluded_attribute list in the BidRequest. repeated int32 attribute = 6; // All sensitive categories for the ads that may be shown from this snippet. // See ad-sensitive-categories.txt in the technical documentation for a list // of ids. We will check to ensure none of these categories were in the // excluded_sensitive_category list in the BidRequest. repeated int32 category = 7; // All restricted categories for the ads that may be shown from this // snippet. See ad-restricted-categories.txt in the technical documentation // for a list of ids. We will check to ensure these categories were listed // in the allowed_restricted_category list in the BidRequest. If you are // bidding with ads in restricted categories you MUST ALWAYS declare them // here. repeated int32 restricted_category = 17; // All names of the ad's advertisers. repeated string advertiser_name = 11; // The width and the height in pixels of the ad. Setting these is optional. // However, these must be set if the bid BidRequest.AdSlot has more than one // width and height or if BidRequest.Mobile.is_interstitial_request is true. optional int32 width = 14; optional int32 height = 15; message AdSlot { // The slot id from the BidRequest that the ad may appear in. required int32 id = 1; // The maximum CPM you want to be charged if you win the auction for this // ad slot, expressed in micros of the specified currency or default // bidding currency. For example, to bid a CPM of 1.29 USD, set // max_cpm_micros = 1290000. Winning bids are rounded up to billable // units. For example, in USD, bids are rounded up to the next multiple // of 10,000 micros (one cent). required int64 max_cpm_micros = 2; // The minimum CPM you want to be charged if you win the auction for this // ad slot, expressed in micros of the specified currency or default // bidding currency. This may represent a second price if you choose // max_cpm_micros as the highest of several bids, or some form of reserve // price if you want to override the reserve price set by the publisher. // The bid must be less than or equal to max_cpm_micros or it will be // ignored. This field is optional and does not need to be set. This // field is not applicable when responding to bid requests with // auction_type set to FIRST_PRICE. optional int64 min_cpm_micros = 3; // The currency used by max_cpm_micros and min_cpm_micros, using ISO-4217 // alpha codes. If this field is populated, the specified currency will // be used to interpret the bid. Otherwise, the default bidding currency // will be used, which is determined in the following priority: // 1. The bidder-level currency, if configured in RTB account settings. // 2. The buyer-level currency. The buyer will be determined by the // billing ID specified in the billing_id field of the bid response if it // is populated, otherwise it will be based on the sole billing ID sent // in the bid request. // // The currency of a buyer account is set on account creation and can be // checked by contacting a Technical Account Manager. optional string currency = 15; // Billing id to attribute this impression to. The value must be in the // set of billing ids for this slot that were sent in the // BidRequest.AdSlot.matching_ad_data.billing_id. This must always be set // if the BidRequest has more than one // BidRequest.AdSlot.matching_ad_data.billing_id or if the bidder has // active child seats. optional int64 billing_id = 4; // The deal id that you want this bid to participate in. Leave unset // or set it to "1" if a deal is available but you want to // ignore the deal and participate in the open auction. optional int64 deal_id = 5 [default = 0]; // For exchange bidders (third party exchanges doing real-time bidding on // DFP), the deal id from the exchange's namespace that is associated with // this bid and reported to publishers. Leave unset if there is no // associated deal. This is arbitrary UTF8 text and must be at most 64 // bytes. optional string exchange_deal_id = 6; // When exchange_deal_id is set, the type of deal. This is reported to // publishers and affects how the deal is treated in the auction. enum ExchangeDealType { OPEN_AUCTION = 0; PRIVATE_AUCTION = 1; PREFERRED_DEAL = 2; EXCHANGE_AUCTION_PACKAGE = 3; } optional ExchangeDealType exchange_deal_type = 7 [default = OPEN_AUCTION]; // The seat ID in the bidder's namespace representing the seat on whose // behalf this bid was made. optional string seat_id = 25; // Buyer declared ID which will be used to break down spend and invalid // traffic metrics in IVT transparency reporting in Query Tool. Note that // IDs with fewer than 1000 impressions will not be used to break down // metrics. IDs longer than 64 bytes will be ignored. optional string buyer_reporting_id = 8; // Token used to identify end third party buyer information if an // exchange as an open bidder is an intermediary. This is obtained from // the third party buyer and must be passed to Google unaltered in the bid // response. optional string third_party_buyer_token = 12; // Experimental feature; may be subject to change. See // https://support.google.com/authorizedbuyers/answer/10890762 for more // information. // // Specifies frequency capping to be applied to the bid. Impressions for // each user are capped at the level specified by frequency_cap_id. A bid // will not participate in the auction if an additional impression for the // user would violate any of the specified caps. Multiple frequency caps // can be specified for the same frequency_cap_id. // // A bid is filtered before the auction if the frequency cap is malformed. // Instances where the cap is malformed include: // - frequency_cap_id is empty or is very long // - max_mpressions or time_range are non-positive // - there are a large number of frequency caps for a single bid // - time_unit is not specified // // Note that if a subsequent bid with the same frequency_cap_id uses a // different duration (represented by time_unit and time_range) then // impressions counted against the old frequency cap will not count // against the new one, and the impressions counted against the new // frequency cap with a different time_unit and time_range will not count // against the old frequency cap.. message FrequencyCap { // An ID that can represent a bidder's use-case for frequency capping. // For example, it could represent their campaign, ad, line item, or // some other entity. It should not contain any user-specific // information or identifiers and should not be longer than 64 // characters. optional string frequency_cap_id = 1; // The time units for which frequency caps can be enforced. enum TimeUnit { UNKNOWN_TIME_UNIT = 0; MINUTE = 1; DAY = 2; WEEK = 3; MONTH = 4; // When INDEFINITE is used, time_range will be ignored. INDEFINITE // means the frequency cap will be applied for a long period of time, // (longer than a month) but not necessarily forever. INDEFINITE = 5; } // The unit of time used to specify the time window for which a // frequency cap applies. optional TimeUnit time_unit = 2; // The length of the time window, in units specified by time_unit, for // which the frequency cap applies. For instance, if time_unit=WEEK and // time_range=3, then capping is applied for a three week period. If the // time_unit=INDEFINITE, this will be ignored. optional int32 time_range = 3 [default = 1]; // The maximum number of impressions allowed to be shown to a user for // the provided frequency_cap_id within the time window described by // time_unit and time_range. optional int32 max_impressions = 4; } repeated FrequencyCap frequency_cap = 16; // Position within the pod. enum PodPosition { // Any position in the pod. POD_POSITION_ANY = 0; // Last position in the pod. POD_POSITION_LAST = 1; // First position in the pod. POD_POSITION_FIRST = 2; // First or last position in the pod. POD_POSITION_FIRST_OR_LAST = 3; } // Indicates that the bid is only eligible // for a specific position within the pod. optional PodPosition position_in_pod = 22; // All bids with the same bid_group_id will be won or lost as a group. // Bids must have a non-empty bid_group_id to allow an ad to be played // as part of a pod. // This field is currently only supported for rewarded video pods // requests. If an ad is submitted on multiple positional bids // represented by AdSlot messages, each bid (AdSlot message) // must have a different bid_group_id. // For example, if a bidder wants to bid ad_1 for first position // and last position in the pod and ad_2 for any position and