Genellikle bir uçuş yolculuğunda, varış noktasına doğrudan gidilen yolculuk yerine birden fazla ayak bulunur. Bu yolculuk sırasında havayolları her bir ayağı için bir biniş kartı düzenler. Google Cüzdan API'si, bu davranışı bacak başına bağımsız FlightObject örnekleri kullanarak destekler.
Örneğin, SFO'dan LAX'e TPE'ye uçan iki yolcunuz varsa iki FlightClass (yolcu başına bir) ve dört FlightObject örnek (yolcu başına iki) olur.
| Yolcu | FlightClass A (SFO -> LAX) |
FlightClass B (LAX -> TPE) |
|---|---|---|
| J. Smith | FlightObject (id_jsmith_1) |
FlightObject (id_jsmith_2) |
| J. Doe | FlightObject (id_jdoe_1) |
FlightObject (id_jdoe_2) |
Bu alanlar, fiziksel biniş kartlarıyla aynı değerleri yansıtır.
Bir kullanıcının aynı anda birden çok bilet satın alabileceği çeşitli senaryolar vardır. Örneğin:
- Birden fazla uçuş
- Duraklama gerektiren geziler
- Aile üyeleri için satın alma
Bu tür durumlarda, bir kullanıcının Google Cüzdan uygulamasına aynı anda birçok biniş kartı eklemesine olanak sağlamak yararlı olur. JSON Web Token'da (JWT) birden fazla nesne veya sınıf tanımlayabilirsiniz. Bunlar daha sonra Google Cüzdan'a Ekle düğmesi veya bağlantısı oluşturmak için kullanılabilir. Kullanıcı düğmeyi tıkladığında, tanımlanmış tüm kartlar aynı anda kullanıcının cihazına eklenir.
İmzalanacak JWT'ye sırasıyla payload özelliğinin flightClasses ve flightObjects dizilerine geçiş sınıflarını ve nesneleri ekleyin. Aşağıdaki örneklerde bunun nasıl yapılacağına dair iki varyasyon gösterilmektedir.
Birden fazla kartın kullanıcı arayüzü gösterimi hakkında daha fazla bilgi için Birden çok biniş kartını gruplandırma bölümünü inceleyin.
Mevcut sınıflar ve nesneler
Bu örnekte, önceden oluşturulmuş sınıf ve nesneler kullanılmaktadır ve yalnızca her birinin kimliklerini gerektirir. classId özelliğinin geçiş nesneleri için isteğe bağlı olduğunu unutmayın. Burada örnek olarak gösterilmektedir.
{
"aud": "google",
"origins": [],
"iss": "your_iam_account@appspot.gserviceaccount.com",
"iat": 1534891254,
"typ": "savetowallet",
"payload": {
"flightObjects": [
{
"classId": "issuerId.flightClassSuffix",
"id": "issuerId.flightObjectSuffix_01"
},
{
"classId": "issuerId.flightClassSuffix",
"id": "issuerId.flightObjectSuffix_02"
}
]
}
}
Yeni sınıflar ve nesneler oluşturma
Bu örnekte bir sınıf ve birden çok alt nesne tanımlanmaktadır. Hem sınıf hem de nesneler, yalnızca kullanıcı Google Cüzdan'a ekle bağlantısını tıklayıp kartları cihazına eklediğinde Google Cüzdan tarafından oluşturulur.
{
"aud": "google",
"origins": [],
"iss": "your_iam_account@appspot.gserviceaccount.com",
"iat": 1534891254,
"typ": "savetowallet",
"payload": {
"flightClasses": [
{
"id": "issuerId.flightClassSuffix",
"origin": {
"terminal": "2",
"gate": "A1",
"kind": "walletobjects#airportInfo",
"airportIataCode": "SFO"
},
"reviewStatus": "UNDER_REVIEW",
"destination": {
"terminal": "1",
"gate": "B3",
"kind": "walletobjects#airportInfo",
"airportIataCode": "TPE"
},
"flightHeader": {
"carrier": {
"carrierIataCode": "BR"
},
"flightNumber": "123"
},
"localScheduledDepartureDateTime": "2027-03-05T06:30:00",
"issuerName": "Google Wallet Airlines"
}
],
"flightObjects": [
{
"id": "issuerId.flightObjectSuffix_1",
"classId": "issuerId.flightClassSuffix",
"state": "active",
"passengerName": "John Doe",
"reservationInfo": {
"confirmationCode": "ABC123"
}
},
{
"id": "issuerId.flightObjectSuffix_2",
"classId": "issuerId.flightClassSuffix",
"state": "active",
"passengerName": "Jane Doe",
"reservationInfo": {
"confirmationCode": "ABC123"
}
}
]
}
}
Aşağıdaki kod örneğinde, kullanıcı düğmeyi tıklayıp kartı cihazına eklediğinde oluşturulan yeni flightClass ve flightObject ile Google Cüzdan'a Ekle bağlantısı gösterilmektedir.
Java
Java entegrasyonunuzu başlatmak için GitHub'daki kod örneklerimizin tamamına bakın.
/**
* Generate a signed JWT that creates a new pass class and object.
*
* <p>When the user opens the "Add to Google Wallet" URL and saves the pass to their wallet, the
* pass class and object defined in the JWT are created. This allows you to create multiple pass
* classes and objects in one API call when the user saves the pass to their wallet.
*
* @param issuerId The issuer ID being used for this request.
* @param classSuffix Developer-defined unique ID for this pass class.
* @param objectSuffix Developer-defined unique ID for the pass object.
* @return An "Add to Google Wallet" link.
*/
public String createJWTNewObjects(String issuerId, String classSuffix, String objectSuffix) {
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
FlightClass newClass =
new FlightClass()
.setId(String.format("%s.%s", issuerId, classSuffix))
.setIssuerName("Issuer name")
.setReviewStatus("UNDER_REVIEW")
.setLocalScheduledDepartureDateTime("2023-07-02T15:30:00")
.setFlightHeader(
new FlightHeader()
.setCarrier(new FlightCarrier().setCarrierIataCode("LX"))
.setFlightNumber("123"))
.setOrigin(new AirportInfo().setAirportIataCode("LAX").setTerminal("1").setGate("A2"))
.setDestination(
new AirportInfo().setAirportIataCode("SFO").setTerminal("2").setGate("C3"));
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightobject
FlightObject newObject =
new FlightObject()
.setId(String.format("%s.%s", issuerId, objectSuffix))
.setClassId(String.format("%s.%s", issuerId, classSuffix))
.setState("ACTIVE")
.setHeroImage(
new Image()
.setSourceUri(
new ImageUri()
.setUri(
"https://farm4.staticflickr.com/3723/11177041115_6e6a3b6f49_o.jpg"))
.setContentDescription(
new LocalizedString()
.setDefaultValue(
new TranslatedString()
.setLanguage("en-US")
.setValue("Hero image description"))))
.setTextModulesData(
List.of(
new TextModuleData()
.setHeader("Text module header")
.setBody("Text module body")
.setId("TEXT_MODULE_ID")))
.setLinksModuleData(
new LinksModuleData()
.setUris(
Arrays.asList(
new Uri()
.setUri("http://maps.google.com/")
.setDescription("Link module URI description")
.setId("LINK_MODULE_URI_ID"),
new Uri()
.setUri("tel:6505555555")
.setDescription("Link module tel description")
.setId("LINK_MODULE_TEL_ID"))))
.setImageModulesData(
List.of(
new ImageModuleData()
.setMainImage(
new Image()
.setSourceUri(
new ImageUri()
.setUri(
"http://farm4.staticflickr.com/3738/12440799783_3dc3c20606_b.jpg"))
.setContentDescription(
new LocalizedString()
.setDefaultValue(
new TranslatedString()
.setLanguage("en-US")
.setValue("Image module description"))))
.setId("IMAGE_MODULE_ID")))
.setBarcode(new Barcode().setType("QR_CODE").setValue("QR code value"))
.setLocations(
List.of(
new LatLongPoint()
.setLatitude(37.424015499999996)
.setLongitude(-122.09259560000001)))
.setPassengerName("Passenger name")
.setBoardingAndSeatingInfo(
new BoardingAndSeatingInfo().setBoardingGroup("B").setSeatNumber("42"))
.setReservationInfo(new ReservationInfo().setConfirmationCode("Confirmation code"));
// Create the JWT as a HashMap object
HashMap<String, Object> claims = new HashMap<String, Object>();
claims.put("iss", ((ServiceAccountCredentials) credentials).getClientEmail());
claims.put("aud", "google");
claims.put("origins", List.of("www.example.com"));
claims.put("typ", "savetowallet");
// Create the Google Wallet payload and add to the JWT
HashMap<String, Object> payload = new HashMap<String, Object>();
payload.put("flightClasses", List.of(newClass));
payload.put("flightObjects", List.of(newObject));
claims.put("payload", payload);
// The service account credentials are used to sign the JWT
Algorithm algorithm =
Algorithm.RSA256(
null, (RSAPrivateKey) ((ServiceAccountCredentials) credentials).getPrivateKey());
String token = JWT.create().withPayload(claims).sign(algorithm);
System.out.println("Add to Google Wallet link");
System.out.printf("https://pay.google.com/gp/v/save/%s%n", token);
return String.format("https://pay.google.com/gp/v/save/%s", token);
}
PHP
PHP ile entegrasyonunuzu başlatmak için GitHub'daki kod örneklerimizin tamamına bakın.
/**
* Generate a signed JWT that creates a new pass class and object.
*
* When the user opens the "Add to Google Wallet" URL and saves the pass to
* their wallet, the pass class and object defined in the JWT are
* created. This allows you to create multiple pass classes and objects in
* one API call when the user saves the pass to their wallet.
*
* @param string $issuerId The issuer ID being used for this request.
* @param string $classSuffix Developer-defined unique ID for the pass class.
* @param string $objectSuffix Developer-defined unique ID for the pass object.
*
* @return string An "Add to Google Wallet" link.
*/
public function createJwtNewObjects(string $issuerId, string $classSuffix, string $objectSuffix)
{
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
$newClass = new FlightClass([
'id' => "{$issuerId}.{$classSuffix}",
'issuerName' => 'Issuer name',
'reviewStatus' => 'UNDER_REVIEW',
'localScheduledDepartureDateTime' => '2023-07-02T15:30:00',
'flightHeader' => new FlightHeader([
'carrier' => new FlightCarrier([
'carrierIataCode' => 'LX'
]),
'flightNumber' => '123'
]),
'origin' => new AirportInfo([
'airportIataCode' => 'LAX',
'terminal' => '1',
'gate' => 'A2'
]),
'destination' => new AirportInfo([
'airportIataCode' => 'SFO',
'terminal' => '2',
'gate' => 'C3'
])
]);
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightobject
$newObject = new FlightObject([
'id' => "{$issuerId}.{$objectSuffix}",
'classId' => "{$issuerId}.{$classSuffix}",
'state' => 'ACTIVE',
'heroImage' => new Image([
'sourceUri' => new ImageUri([
'uri' => 'https://farm4.staticflickr.com/3723/11177041115_6e6a3b6f49_o.jpg'
]),
'contentDescription' => new LocalizedString([
'defaultValue' => new TranslatedString([
'language' => 'en-US',
'value' => 'Hero image description'
])
])
]),
'textModulesData' => [
new TextModuleData([
'header' => 'Text module header',
'body' => 'Text module body',
'id' => 'TEXT_MODULE_ID'
])
],
'linksModuleData' => new LinksModuleData([
'uris' => [
new Uri([
'uri' => 'http://maps.google.com/',
'description' => 'Link module URI description',
'id' => 'LINK_MODULE_URI_ID'
]),
new Uri([
'uri' => 'tel:6505555555',
'description' => 'Link module tel description',
'id' => 'LINK_MODULE_TEL_ID'
])
]
]),
'imageModulesData' => [
new ImageModuleData([
'mainImage' => new Image([
'sourceUri' => new ImageUri([
'uri' => 'http://farm4.staticflickr.com/3738/12440799783_3dc3c20606_b.jpg'
]),
'contentDescription' => new LocalizedString([
'defaultValue' => new TranslatedString([
'language' => 'en-US',
'value' => 'Image module description'
])
])
]),
'id' => 'IMAGE_MODULE_ID'
])
],
'barcode' => new Barcode([
'type' => 'QR_CODE',
'value' => 'QR code value'
]),
'locations' => [
new LatLongPoint([
'latitude' => 37.424015499999996,
'longitude' => -122.09259560000001
])
],
'passengerName' => 'Passenger name',
'boardingAndSeatingInfo' => new BoardingAndSeatingInfo([
'boardingGroup' => 'B',
'seatNumber' => '42'
]),
'reservationInfo' => new ReservationInfo([
'confirmationCode' => 'Confirmation code'
])
]);
// The service account credentials are used to sign the JWT
$serviceAccount = json_decode(file_get_contents($this->keyFilePath), true);
// Create the JWT as an array of key/value pairs
$claims = [
'iss' => $serviceAccount['client_email'],
'aud' => 'google',
'origins' => ['www.example.com'],
'typ' => 'savetowallet',
'payload' => [
'flightClasses' => [
$newClass
],
'flightObjects' => [
$newObject
]
]
];
$token = JWT::encode(
$claims,
$serviceAccount['private_key'],
'RS256'
);
print "Add to Google Wallet link\n";
print "https://pay.google.com/gp/v/save/{$token}";
return "https://pay.google.com/gp/v/save/{$token}";
}
Python
Python'da entegrasyonunuzu başlatmak için GitHub'daki kod örneklerimizin tamamına bakın.
def create_jwt_new_objects(self, issuer_id: str, class_suffix: str,
object_suffix: str) -> str:
"""Generate a signed JWT that creates a new pass class and object.
When the user opens the "Add to Google Wallet" URL and saves the pass to
their wallet, the pass class and object defined in the JWT are
created. This allows you to create multiple pass classes and objects in
one API call when the user saves the pass to their wallet.
Args:
issuer_id (str): The issuer ID being used for this request.
class_suffix (str): Developer-defined unique ID for the pass class.
object_suffix (str): Developer-defined unique ID for the pass object.
Returns:
An "Add to Google Wallet" link.
"""
# Seelink below for more information on required properties
# https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
new_class = {
'id': f'{issuer_id}.{class_suffix}',
'issuerName': 'Issuer name',
'reviewStatus': 'UNDER_REVIEW',
'localScheduledDepartureDateTime': '2023-07-02T15:30:00',
'flightHeader': {
'carrier': {
'carrierIataCode': 'LX'
},
'flightNumber': '123'
},
'origin': {
'airportIataCode': 'LAX',
'terminal': '1',
'gate': 'A2'
},
'destination': {
'airportIataCode': 'SFO',
'terminal': '2',
'gate': 'C3'
}
}
# See link below for more information on required properties
# https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
new_object = {
'id': f'{issuer_id}.{object_suffix}',
'classId': f'{issuer_id}.{class_suffix}',
'state': 'ACTIVE',
'heroImage': {
'sourceUri': {
'uri':
'https://farm4.staticflickr.com/3723/11177041115_6e6a3b6f49_o.jpg'
},
'contentDescription': {
'defaultValue': {
'language': 'en-US',
'value': 'Hero image description'
}
}
},
'textModulesData': [{
'header': 'Text module header',
'body': 'Text module body',
'id': 'TEXT_MODULE_ID'
}],
'linksModuleData': {
'uris': [{
'uri': 'http://maps.google.com/',
'description': 'Link module URI description',
'id': 'LINK_MODULE_URI_ID'
}, {
'uri': 'tel:6505555555',
'description': 'Link module tel description',
'id': 'LINK_MODULE_TEL_ID'
}]
},
'imageModulesData': [{
'mainImage': {
'sourceUri': {
'uri':
'http://farm4.staticflickr.com/3738/12440799783_3dc3c20606_b.jpg'
},
'contentDescription': {
'defaultValue': {
'language': 'en-US',
'value': 'Image module description'
}
}
},
'id': 'IMAGE_MODULE_ID'
}],
'barcode': {
'type': 'QR_CODE',
'value': 'QR code'
},
'locations': [{
'latitude': 37.424015499999996,
'longitude': -122.09259560000001
}],
'passengerName': 'Passenger name',
'boardingAndSeatingInfo': {
'boardingGroup': 'B',
'seatNumber': '42'
},
'reservationInfo': {
'confirmationCode': 'Confirmation code'
}
}
# Create the JWT claims
claims = {
'iss': self.credentials.service_account_email,
'aud': 'google',
'origins': ['www.example.com'],
'typ': 'savetowallet',
'payload': {
# The listed classes and objects will be created
'flightClasses': [new_class],
'flightObjects': [new_object]
}
}
# The service account credentials are used to sign the JWT
signer = crypt.RSASigner.from_service_account_file(self.key_file_path)
token = jwt.encode(signer, claims).decode('utf-8')
print('Add to Google Wallet link')
print(f'https://pay.google.com/gp/v/save/{token}')
return f'https://pay.google.com/gp/v/save/{token}'
C#
C# ile entegrasyonunuzu başlatmak için GitHub'daki kod örneklerimizin tamamına bakın.
/// <summary>
/// Generate a signed JWT that creates a new pass class and object.
/// <para />
/// When the user opens the "Add to Google Wallet" URL and saves the pass to
/// their wallet, the pass class and object defined in the JWT are created.
/// This allows you to create multiple pass classes and objects in one API
/// call when the user saves the pass to their wallet.
/// <para />
/// The Google Wallet C# library uses Newtonsoft.Json.JsonPropertyAttribute
/// to specify the property names when converting objects to JSON. The
/// Newtonsoft.Json.JsonConvert.SerializeObject method will automatically
/// serialize the object with the right property names.
/// </summary>
/// <param name="issuerId">The issuer ID being used for this request.</param>
/// <param name="classSuffix">Developer-defined unique ID for this pass class.</param>
/// <param name="objectSuffix">Developer-defined unique ID for the pass object.</param>
/// <returns>An "Add to Google Wallet" link.</returns>
public string CreateJWTNewObjects(string issuerId, string classSuffix, string objectSuffix)
{
// Ignore null values when serializing to/from JSON
JsonSerializerSettings excludeNulls = new JsonSerializerSettings()
{
NullValueHandling = NullValueHandling.Ignore
};
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
FlightClass newClass = new FlightClass
{
Id = $"{issuerId}.{classSuffix}",
IssuerName = "Issuer name",
ReviewStatus = "UNDER_REVIEW",
LocalScheduledDepartureDateTime = "2023-07-02T15:30:00",
FlightHeader = new FlightHeader
{
Carrier = new FlightCarrier
{
CarrierIataCode = "LX"
},
FlightNumber = "123"
},
Origin = new AirportInfo
{
AirportIataCode = "LAX",
Terminal = "1",
Gate = "A2"
},
Destination = new AirportInfo
{
AirportIataCode = "SFO",
Terminal = "2",
Gate = "C3"
}
};
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightobject
FlightObject newObject = new FlightObject
{
Id = $"{issuerId}.{objectSuffix}",
ClassId = $"{issuerId}.{classSuffix}",
State = "ACTIVE",
HeroImage = new Image
{
SourceUri = new ImageUri
{
Uri = "https://farm4.staticflickr.com/3723/11177041115_6e6a3b6f49_o.jpg"
},
ContentDescription = new LocalizedString
{
DefaultValue = new TranslatedString
{
Language = "en-US",
Value = "Hero image description"
}
}
},
TextModulesData = new List<TextModuleData>
{
new TextModuleData
{
Header = "Text module header",
Body = "Text module body",
Id = "TEXT_MODULE_ID"
}
},
LinksModuleData = new LinksModuleData
{
Uris = new List<Google.Apis.Walletobjects.v1.Data.Uri>
{
new Google.Apis.Walletobjects.v1.Data.Uri
{
UriValue = "http://maps.google.com/",
Description = "Link module URI description",
Id = "LINK_MODULE_URI_ID"
},
new Google.Apis.Walletobjects.v1.Data.Uri
{
UriValue = "tel:6505555555",
Description = "Link module tel description",
Id = "LINK_MODULE_TEL_ID"
}
}
},
ImageModulesData = new List<ImageModuleData>
{
new ImageModuleData
{
MainImage = new Image
{
SourceUri = new ImageUri
{
Uri = "http://farm4.staticflickr.com/3738/12440799783_3dc3c20606_b.jpg"
},
ContentDescription = new LocalizedString
{
DefaultValue = new TranslatedString
{
Language = "en-US",
Value = "Image module description"
}
}
},
Id = "IMAGE_MODULE_ID"
}
},
Barcode = new Barcode
{
Type = "QR_CODE",
Value = "QR code"
},
Locations = new List<LatLongPoint>
{
new LatLongPoint
{
Latitude = 37.424015499999996,
Longitude = -122.09259560000001
}
},
PassengerName = "Passenger name",
BoardingAndSeatingInfo = new BoardingAndSeatingInfo
{
BoardingGroup = "B",
SeatNumber = "42"
},
ReservationInfo = new ReservationInfo
{
ConfirmationCode = "Confirmation code"
}
};
// Create JSON representations of the class and object
JObject serializedClass = JObject.Parse(
JsonConvert.SerializeObject(newClass, excludeNulls));
JObject serializedObject = JObject.Parse(
JsonConvert.SerializeObject(newObject, excludeNulls));
// Create the JWT as a JSON object
JObject jwtPayload = JObject.Parse(JsonConvert.SerializeObject(new
{
iss = credentials.Id,
aud = "google",
origins = new List<string>
{
"www.example.com"
},
typ = "savetowallet",
payload = JObject.Parse(JsonConvert.SerializeObject(new
{
// The listed classes and objects will be created
// when the user saves the pass to their wallet
flightClasses = new List<JObject>
{
serializedClass
},
flightObjects = new List<JObject>
{
serializedObject
}
}))
}));
// Deserialize into a JwtPayload
JwtPayload claims = JwtPayload.Deserialize(jwtPayload.ToString());
// The service account credentials are used to sign the JWT
RsaSecurityKey key = new RsaSecurityKey(credentials.Key);
SigningCredentials signingCredentials = new SigningCredentials(
key, SecurityAlgorithms.RsaSha256);
JwtSecurityToken jwt = new JwtSecurityToken(
new JwtHeader(signingCredentials), claims);
string token = new JwtSecurityTokenHandler().WriteToken(jwt);
Console.WriteLine("Add to Google Wallet link");
Console.WriteLine($"https://pay.google.com/gp/v/save/{token}");
return $"https://pay.google.com/gp/v/save/{token}";
}
Node.js
Düğüm'de entegrasyonunuzu başlatmak için GitHub'daki kod örneklerimizin tamamına bakın.
/**
* Generate a signed JWT that creates a new pass class and object.
*
* When the user opens the "Add to Google Wallet" URL and saves the pass to
* their wallet, the pass class and object defined in the JWT are
* created. This allows you to create multiple pass classes and objects in
* one API call when the user saves the pass to their wallet.
*
* @param {string} issuerId The issuer ID being used for this request.
* @param {string} classSuffix Developer-defined unique ID for the pass class.
* @param {string} objectSuffix Developer-defined unique ID for the pass object.
*
* @returns {string} An "Add to Google Wallet" link.
*/
createJwtNewObjects(issuerId, classSuffix, objectSuffix) {
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightclass
let newClass = {
'id': `${issuerId}.${classSuffix}`,
'issuerName': 'Issuer name',
'reviewStatus': 'UNDER_REVIEW',
'localScheduledDepartureDateTime': '2023-07-02T15:30:00',
'flightHeader': {
'carrier': {
'carrierIataCode': 'LX'
},
'flightNumber': '123'
},
'origin': {
'airportIataCode': 'LAX',
'terminal': '1',
'gate': 'A2'
},
'destination': {
'airportIataCode': 'SFO',
'terminal': '2',
'gate': 'C3'
}
};
// See link below for more information on required properties
// https://developers.google.com/wallet/tickets/boarding-passes/rest/v1/flightobject
let newObject = {
'id': `${issuerId}.${objectSuffix}`,
'classId': `${issuerId}.${classSuffix}`,
'state': 'ACTIVE',
'heroImage': {
'sourceUri': {
'uri': 'https://farm4.staticflickr.com/3723/11177041115_6e6a3b6f49_o.jpg'
},
'contentDescription': {
'defaultValue': {
'language': 'en-US',
'value': 'Hero image description'
}
}
},
'textModulesData': [
{
'header': 'Text module header',
'body': 'Text module body',
'id': 'TEXT_MODULE_ID'
}
],
'linksModuleData': {
'uris': [
{
'uri': 'http://maps.google.com/',
'description': 'Link module URI description',
'id': 'LINK_MODULE_URI_ID'
},
{
'uri': 'tel:6505555555',
'description': 'Link module tel description',
'id': 'LINK_MODULE_TEL_ID'
}
]
},
'imageModulesData': [
{
'mainImage': {
'sourceUri': {
'uri': 'http://farm4.staticflickr.com/3738/12440799783_3dc3c20606_b.jpg'
},
'contentDescription': {
'defaultValue': {
'language': 'en-US',
'value': 'Image module description'
}
}
},
'id': 'IMAGE_MODULE_ID'
}
],
'barcode': {
'type': 'QR_CODE',
'value': 'QR code'
},
'locations': [
{
'latitude': 37.424015499999996,
'longitude': -122.09259560000001
}
],
'passengerName': 'Passenger name',
'boardingAndSeatingInfo': {
'boardingGroup': 'B',
'seatNumber': '42'
},
'reservationInfo': {
'confirmationCode': 'Confirmation code'
}
};
// Create the JWT claims
let claims = {
iss: this.credentials.client_email,
aud: 'google',
origins: ['www.example.com'],
typ: 'savetowallet',
payload: {
// The listed classes and objects will be created
flightClasses: [newClass],
flightObjects: [newObject]
}
};
// The service account credentials are used to sign the JWT
let token = jwt.sign(claims, this.credentials.private_key, { algorithm: 'RS256' });
console.log('Add to Google Wallet link');
console.log(`https://pay.google.com/gp/v/save/${token}`);
return `https://pay.google.com/gp/v/save/${token}`;
}
Go
Go ile entegrasyonunuzu başlatmak için GitHub'daki GitHub'daki kod örneklerimizin tamamını içeren kod örneklerimize bakın.
// Generate a signed JWT that creates a new pass class and object.
//
// When the user opens the "Add to Google Wallet" URL and saves the pass to
// their wallet, the pass class and object defined in the JWT are
// created. This allows you to create multiple pass classes and objects in
// one API call when the user saves the pass to their wallet.
func (d *demoFlight) createJwtNewObjects(issuerId, classSuffix, objectSuffix string) {
flightObject := new(walletobjects.FlightObject)
flightObject.Id = fmt.Sprintf("%s.%s", issuerId, objectSuffix)
flightObject.ClassId = fmt.Sprintf("%s.%s", issuerId, classSuffix)
flightObject.State = "ACTIVE"
flightObject.PassengerName = "Passenger name"
flightObject.ReservationInfo = &walletobjects.ReservationInfo{
ConfirmationCode: "Confirmation code",
}
flightJson, _ := json.Marshal(flightObject)
var payload map[string]any
json.Unmarshal([]byte(fmt.Sprintf(`
{
"flightObjects": [%s]
}
`, flightJson)), &payload)
claims := jwt.MapClaims{
"iss": d.credentials.Email,
"aud": "google",
"origins": []string{"www.example.com"},
"typ": "savetowallet",
"payload": payload,
}
// The service account credentials are used to sign the JWT
key, _ := jwt.ParseRSAPrivateKeyFromPEM(d.credentials.PrivateKey)
token, _ := jwt.NewWithClaims(jwt.SigningMethodRS256, claims).SignedString(key)
fmt.Println("Add to Google Wallet link")
fmt.Println("https://pay.google.com/gp/v/save/" + token)
}