Calculators

Each calculator is a node of a graph. We describe how to create a new calculator, how to initialize a calculator, how to perform its calculations, input and output streams, timestamps, and options. Each node in the graph is implemented as a Calculator. The bulk of graph execution happens inside its calculators. A calculator may receive zero or more input streams and/or side packets and produces zero or more output streams and/or side packets.

CalculatorBase

A calculator is created by defining a new sub-class of the CalculatorBase class, implementing a number of methods, and registering the new sub-class with Mediapipe. At a minimum, a new calculator must implement the below four methods

  • GetContract()
    • Calculator authors can specify the expected types of inputs and outputs of a calculator in GetContract(). When a graph is initialized, the framework calls a static method to verify if the packet types of the connected inputs and outputs match the information in this specification.
  • Open()
    • After a graph starts, the framework calls Open(). The input side packets are available to the calculator at this point. Open() interprets the node configuration operations (see Graphs) and prepares the calculator's per-graph-run state. This function may also write packets to calculator outputs. An error during Open() can terminate the graph run.
  • Process()
    • For a calculator with inputs, the framework calls Process() repeatedly whenever at least one input stream has a packet available. The framework by default guarantees that all inputs have the same timestamp (see Synchronization for more information). Multiple Process() calls can be invoked simultaneously when parallel execution is enabled. If an error occurs during Process(), the framework calls Close() and the graph run terminates.
  • Close()
    • After all calls to Process() finish or when all input streams close, the framework calls Close(). This function is always called if Open() was called and succeeded and even if the graph run terminated because of an error. No inputs are available via any input streams during Close(), but it still has access to input side packets and therefore may write outputs. After Close() returns, the calculator should be considered a dead node. The calculator object is destroyed as soon as the graph finishes running.

The following are code snippets from CalculatorBase.h.

class CalculatorBase {
 public:
  ...

  // The subclasses of CalculatorBase must implement GetContract.
  // ...
  static absl::Status GetContract(CalculatorContract* cc);

  // Open is called before any Process() calls, on a freshly constructed
  // calculator.  Subclasses may override this method to perform necessary
  // setup, and possibly output Packets and/or set output streams' headers.
  // ...
  virtual absl::Status Open(CalculatorContext* cc) {
    return absl::OkStatus();
  }

  // Processes the incoming inputs. May call the methods on cc to access
  // inputs and produce outputs.
  // ...
  virtual absl::Status Process(CalculatorContext* cc) = 0;

  // Is called if Open() was called and succeeded.  Is called either
  // immediately after processing is complete or after a graph run has ended
  // (if an error occurred in the graph).  ...
  virtual absl::Status Close(CalculatorContext* cc) {
    return absl::OkStatus();
  }

  ...
};

Life of a calculator

During initialization of a MediaPipe graph, the framework calls a GetContract() static method to determine what kinds of packets are expected.

The framework constructs and destroys the entire calculator for each graph run (e.g. once per video or once per image). Expensive or large objects that remain constant across graph runs should be supplied as input side packets so the calculations are not repeated on subsequent runs.

After initialization, for each run of the graph, the following sequence occurs:

  • Open()
  • Process() (repeatedly)
  • Close()

The framework calls Open() to initialize the calculator. Open() should interpret any options and set up the calculator's per-graph-run state. Open() may obtain input side packets and write packets to calculator outputs. If appropriate, it should call SetOffset() to reduce potential packet buffering of input streams.

If an error occurs during Open() or Process() (as indicated by one of them returning a non-Ok status), the graph run is terminated with no further calls to the calculator's methods, and the calculator is destroyed.

For a calculator with inputs, the framework calls Process() whenever at least one input has a packet available. The framework guarantees that inputs all have the same timestamp, that timestamps increase with each call to Process() and that all packets are delivered. As a consequence, some inputs may not have any packets when Process() is called. An input whose packet is missing appears to produce an empty packet (with no timestamp).

The framework calls Close() after all calls to Process(). All inputs will have been exhausted, but Close() has access to input side packets and may write outputs. After Close returns, the calculator is destroyed.

Calculators with no inputs are referred to as sources. A source calculator continues to have Process() called as long as it returns an Ok status. A source calculator indicates that it is exhausted by returning a stop status (i.e. mediaPipe::tool::StatusStop().).

Identifying inputs and outputs

The public interface to a calculator consists of a set of input streams and output streams. In a CalculatorGraphConfiguration, the outputs from some calculators are connected to the inputs of other calculators using named streams. Stream names are normally lowercase, while input and output tags are normally UPPERCASE. In the example below, the output with tag name VIDEO is connected to the input with tag name VIDEO_IN using the stream named video_stream.

# Graph describing calculator SomeAudioVideoCalculator
node {
  calculator: "SomeAudioVideoCalculator"
  input_stream: "INPUT:combined_input"
  output_stream: "VIDEO:video_stream"
}
node {
  calculator: "SomeVideoCalculator"
  input_stream: "VIDEO_IN:video_stream"
  output_stream: "VIDEO_OUT:processed_video"
}

Input and output streams can be identified by index number, by tag name, or by a combination of tag name and index number. You can see some examples of input and output identifiers in the example below. SomeAudioVideoCalculator identifies its video output by tag and its audio outputs by the combination of tag and index. The input with tag VIDEO is connected to the stream named video_stream. The outputs with tag AUDIO and indices 0 and 1 are connected to the streams named audio_left and audio_right. SomeAudioCalculator identifies its audio inputs by index only (no tag needed).

# Graph describing calculator SomeAudioVideoCalculator
node {
  calculator: "SomeAudioVideoCalculator"
  input_stream: "combined_input"
  output_stream: "VIDEO:video_stream"
  output_stream: "AUDIO:0:audio_left"
  output_stream: "AUDIO:1:audio_right"
}

node {
  calculator: "SomeAudioCalculator"
  input_stream: "audio_left"
  input_stream: "audio_right"
  output_stream: "audio_energy"
}

In the calculator implementation, inputs and outputs are also identified by tag name and index number. In the function below input and output are identified:

  • By index number: The combined input stream is identified simply by index 0.
  • By tag name: The video output stream is identified by tag name "VIDEO".
  • By tag name and index number: The output audio streams are identified by the combination of the tag name AUDIO and the index numbers 0 and 1.
// c++ Code snippet describing the SomeAudioVideoCalculator GetContract() method
class SomeAudioVideoCalculator : public CalculatorBase {
 public:
  static absl::Status GetContract(CalculatorContract* cc) {
    cc->Inputs().Index(0).SetAny();
    // SetAny() is used to specify that whatever the type of the
    // stream is, it's acceptable.  This does not mean that any
    // packet is acceptable.  Packets in the stream still have a
    // particular type.  SetAny() has the same effect as explicitly
    // setting the type to be the stream's type.
    cc->Outputs().Tag("VIDEO").Set<ImageFrame>();
    cc->Outputs().Get("AUDIO", 0).Set<Matrix>();
    cc->Outputs().Get("AUDIO", 1).Set<Matrix>();
    return absl::OkStatus();
  }

Processing

Process() called on a non-source node must return absl::OkStatus() to indicate that all went well, or any other status code to signal an error

If a non-source calculator returns tool::StatusStop(), then this signals the graph is being cancelled early. In this case, all source calculators and graph input streams will be closed (and remaining Packets will propagate through the graph).

A source node in a graph will continue to have Process() called on it as long as it returns absl::OkStatus(). To indicate that there is no more data to be generated return tool::StatusStop(). Any other status indicates an error has occurred.

Close() returns absl::OkStatus() to indicate success. Any other status indicates a failure.

Here is the basic Process() function. It uses the Input() method (which can be used only if the calculator has a single input) to request its input data. It then uses std::unique_ptr to allocate the memory needed for the output packet, and does the calculations. When done it releases the pointer when adding it to the output stream.

absl::Status MyCalculator::Process() {
  const Matrix& input = Input()->Get<Matrix>();
  std::unique_ptr<Matrix> output(new Matrix(input.rows(), input.cols()));
  // do your magic here....
  //    output->row(n) =  ...
  Output()->Add(output.release(), InputTimestamp());
  return absl::OkStatus();
}

Calculator options

Calculators accept processing parameters through (1) input stream packets (2) input side packets, and (3) calculator options. Calculator options, if specified, appear as literal values in the node_options field of the CalculatorGraphConfiguration.Node message.

  node {
    calculator: "TfLiteInferenceCalculator"
    input_stream: "TENSORS:main_model_input"
    output_stream: "TENSORS:main_model_output"
    node_options: {
      [type.googleapis.com/mediapipe.TfLiteInferenceCalculatorOptions] {
        model_path: "mediapipe/models/detection_model.tflite"
      }
    }
  }

The node_options field accepts the proto3 syntax. Alternatively, calculator options can be specified in the options field using proto2 syntax.

  node {
    calculator: "TfLiteInferenceCalculator"
    input_stream: "TENSORS:main_model_input"
    output_stream: "TENSORS:main_model_output"
    node_options: {
      [type.googleapis.com/mediapipe.TfLiteInferenceCalculatorOptions] {
        model_path: "mediapipe/models/detection_model.tflite"
      }
    }
  }

Not all calculators accept calculator options. In order to accept options, a calculator will normally define a new protobuf message type to represent its options, such as PacketClonerCalculatorOptions. The calculator will then read that protobuf message in its CalculatorBase::Open method, and possibly also in its CalculatorBase::GetContract function or its CalculatorBase::Process method. Normally, the new protobuf message type will be defined as a protobuf schema using a ".proto" file and a mediapipe_proto_library() build rule.

  mediapipe_proto_library(
      name = "packet_cloner_calculator_proto",
      srcs = ["packet_cloner_calculator.proto"],
      visibility = ["//visibility:public"],
      deps = [
          "//mediapipe/framework:calculator_options_proto",
          "//mediapipe/framework:calculator_proto",
      ],
  )

Example calculator

This section discusses the implementation of PacketClonerCalculator, which does a relatively simple job, and is used in many calculator graphs. PacketClonerCalculator simply produces a copy of its most recent input packets on demand.

PacketClonerCalculator is useful when the timestamps of arriving data packets are not aligned perfectly. Suppose we have a room with a microphone, light sensor and a video camera that is collecting sensory data. Each of the sensors operates independently and collects data intermittently. Suppose that the output of each sensor is:

  • microphone = loudness in decibels of sound in the room (Integer)
  • light sensor = brightness of room (Integer)
  • video camera = RGB image frame of room (ImageFrame)

Our simple perception pipeline is designed to process sensory data from these 3 sensors such that at any time when we have image frame data from the camera that is synchronized with the last collected microphone loudness data and light sensor brightness data. To do this with MediaPipe, our perception pipeline has 3 input streams:

  • room_mic_signal - Each packet of data in this input stream is integer data representing how loud audio is in a room with timestamp.
  • room_lightening_sensor - Each packet of data in this input stream is integer data representing how bright is the room illuminated with timestamp.
  • room_video_tick_signal - Each packet of data in this input stream is imageframe of video data representing video collected from camera in the room with timestamp.

Below is the implementation of the PacketClonerCalculator. You can see the GetContract(), Open(), and Process() methods as well as the instance variable current_ which holds the most recent input packets.

// This takes packets from N+1 streams, A_1, A_2, ..., A_N, B.
// For every packet that appears in B, outputs the most recent packet from each
// of the A_i on a separate stream.

#include <vector>

#include "absl/strings/str_cat.h"
#include "mediapipe/framework/calculator_framework.h"

namespace mediapipe {

// For every packet received on the last stream, output the latest packet
// obtained on all other streams. Therefore, if the last stream outputs at a
// higher rate than the others, this effectively clones the packets from the
// other streams to match the last.
//
// Example config:
// node {
//   calculator: "PacketClonerCalculator"
//   input_stream: "first_base_signal"
//   input_stream: "second_base_signal"
//   input_stream: "tick_signal"
//   output_stream: "cloned_first_base_signal"
//   output_stream: "cloned_second_base_signal"
// }
//
class PacketClonerCalculator : public CalculatorBase {
 public:
  static absl::Status GetContract(CalculatorContract* cc) {
    const int tick_signal_index = cc->Inputs().NumEntries() - 1;
    // cc->Inputs().NumEntries() returns the number of input streams
    // for the PacketClonerCalculator
    for (int i = 0; i < tick_signal_index; ++i) {
      cc->Inputs().Index(i).SetAny();
      // cc->Inputs().Index(i) returns the input stream pointer by index
      cc->Outputs().Index(i).SetSameAs(&cc->Inputs().Index(i));
    }
    cc->Inputs().Index(tick_signal_index).SetAny();
    return absl::OkStatus();
  }

  absl::Status Open(CalculatorContext* cc) final {
    tick_signal_index_ = cc->Inputs().NumEntries() - 1;
    current_.resize(tick_signal_index_);
    // Pass along the header for each stream if present.
    for (int i = 0; i < tick_signal_index_; ++i) {
      if (!cc->Inputs().Index(i).Header().IsEmpty()) {
        cc->Outputs().Index(i).SetHeader(cc->Inputs().Index(i).Header());
        // Sets the output stream of index i header to be the same as
        // the header for the input stream of index i
      }
    }
    return absl::OkStatus();
  }

  absl::Status Process(CalculatorContext* cc) final {
    // Store input signals.
    for (int i = 0; i < tick_signal_index_; ++i) {
      if (!cc->Inputs().Index(i).Value().IsEmpty()) {
        current_[i] = cc->Inputs().Index(i).Value();
      }
    }

    // Output if the tick signal is non-empty.
    if (!cc->Inputs().Index(tick_signal_index_).Value().IsEmpty()) {
      for (int i = 0; i < tick_signal_index_; ++i) {
        if (!current_[i].IsEmpty()) {
          cc->Outputs().Index(i).AddPacket(
              current_[i].At(cc->InputTimestamp()));
          // Add a packet to output stream of index i a packet from inputstream i
          // with timestamp common to all present inputs
        } else {
          cc->Outputs().Index(i).SetNextTimestampBound(
              cc->InputTimestamp().NextAllowedInStream());
          // if current_[i], 1 packet buffer for input stream i is empty, we will set
          // next allowed timestamp for input stream i to be current timestamp + 1
        }
      }
    }
    return absl::OkStatus();
  }

 private:
  std::vector<Packet> current_;
  int tick_signal_index_;
};

REGISTER_CALCULATOR(PacketClonerCalculator);
}  // namespace mediapipe

Typically, a calculator has only a .cc file. No .h is required, because mediapipe uses registration to make calculators known to it. After you have defined your calculator class, register it with a macro invocation REGISTER_CALCULATOR(calculator_class_name).

Below is a trivial MediaPipe graph that has 3 input streams, 1 node (PacketClonerCalculator) and 2 output streams.

input_stream: "room_mic_signal"
input_stream: "room_lighting_sensor"
input_stream: "room_video_tick_signal"

node {
   calculator: "PacketClonerCalculator"
   input_stream: "room_mic_signal"
   input_stream: "room_lighting_sensor"
   input_stream: "room_video_tick_signal"
   output_stream: "cloned_room_mic_signal"
   output_stream: "cloned_lighting_sensor"
 }

The diagram below shows how the PacketClonerCalculator defines its output packets (bottom) based on its series of input packets (top).

Graph using PacketClonerCalculator
Each time it receives a packet on its TICK input stream, the PacketClonerCalculator outputs the most recent packet from each of its input streams. The sequence of output packets (bottom) is determined by the sequence of input packets (top) and their timestamps. The timestamps are shown along the right side of the diagram.